# Flint 4 BE-14000 Discussion Thread **URL:** \ **Category:** VPN, DNS, Leaks\ **Created:** [September 1, 2026, 9:54am UTC](https://forum.gl-inet.com/t/flint-4-be-14000-discussion-thread/70944 "2026-09-01T09:54:24Z")\ **Posts on this page:** 17\ **Page:** 9
**Author:** ![Dust](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/d/c2a13f/32.png) [@Dust](https://forum.gl-inet.com/u/Dust)\ **Post date:** [October 17, 2026, 7:53am UTC](https://forum.gl-inet.com/t/flint-4-be-14000-discussion-thread/70944/170 "2026-10-17T07:53:03Z")
Rookie mistake. I set up port forwarding on my gpon ont to flint 3 oo and fit was different than Flint 4 so it could work. Now it's fine. ---
**Author:** ![Galenjohn](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/g/c68b51/32.png) [@Galenjohn](https://forum.gl-inet.com/u/Galenjohn)\ **Post date:** [October 17, 2026, 10:29am UTC](https://forum.gl-inet.com/t/flint-4-be-14000-discussion-thread/70944/171 "2026-10-17T10:29:03Z")
Nice that you let us know what the problem was. In your log I saw that at the end it said server was active so it had to be something else. ---
**Author:** ![Dust](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/d/c2a13f/32.png) [@Dust](https://forum.gl-inet.com/u/Dust)\ **Post date:** [October 17, 2026, 9:24pm UTC](https://forum.gl-inet.com/t/flint-4-be-14000-discussion-thread/70944/172 "2026-10-17T21:24:14Z")
I 've installed dockerman but it shows only a shortcut on Luci 'services' menu not whole menu like I had on flint 3. Link lead to docker menu so it works but I wonder why it looks different now. ![obraz_2026-10-17_214602708](https://forum-static.gl-inet.com/original/3X/7/f/7f4d5dc292b9631339912248d5efc8dffa418b12.png) It looked like this: ![image](https://forum-static.gl-inet.com/original/3X/3/4/343d56908957a56e10d4b3df5afe26fe5966b501.png) ---
**Author:** ![xize11](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/xize11/32/5340_2.png) [@xize11](https://forum.gl-inet.com/u/xize11)\ **Post date:** [October 17, 2026, 9:33pm UTC](https://forum.gl-inet.com/t/flint-4-be-14000-discussion-thread/70944/173 "2026-10-17T21:33:28Z")
My guess is that the one on the Flint 3 uses an older OpenWrt base which mean they compiled older version. Especially if you use the newer betas on Flint 4 the OpenWrt base version is more updated. Though, I also noticed some other missing parts on luci aswell like the dhcp options being very stripped down, from what you can actually get from luci even on older OpenWrt bases. So some things can be also be vendor sdk specific too. ---
**Author:** ![skywizard](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/skywizard/32/34573_2.png) [@skywizard](https://forum.gl-inet.com/u/skywizard)\ **Post date:** [October 18, 2026, 1:42pm UTC](https://forum.gl-inet.com/t/flint-4-be-14000-discussion-thread/70944/174 "2026-10-18T13:42:50Z")
THis is what I see on my F4 B4. ![image](https://forum-static.gl-inet.com/original/3X/6/c/6c794366fb5aceac11af00209df60eb24da301bc.png) ---
**Author:** ![Dust](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/d/c2a13f/32.png) [@Dust](https://forum.gl-inet.com/u/Dust)\ **Post date:** [October 19, 2026, 1:37am UTC](https://forum.gl-inet.com/t/flint-4-be-14000-discussion-thread/70944/175 "2026-10-19T01:37:45Z")
Yup. dockerman work but shortcut on luci menu not. I think it is snapshot 25 related. How is Your ram utilisation? I have 95% ram used after samba transfer to hdd or other ram heavy task like docker instalation. Ram in the GUI shows normal usage but elevated cache. 56% screen is from RouterPilot and and it report normal cache. Is it a bug or normal behavior? ![Zrzut ekranu 2026-10-18 143730](https://forum-static.gl-inet.com/original/3X/0/c/0c7a188fa075df7d0b76276333388a74c81c96ad.png) ![Zrzut ekranu 2026-10-18 142401](https://forum-static.gl-inet.com/original/3X/6/8/681671b3b30d554adc7c7cfd94421776c42d219c.png) ![Zrzut ekranu 2026-10-18 142348](https://forum-static.gl-inet.com/original/3X/6/2/62a0eb6d28035751b4f38b011cc078c602a82258.png)Edit: I have 1gb cache after reboot and only wireguard remote access. I think it started when I've plugged in external storage. ---
**Author:** ![Bartman](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bartman/32/37793_2.png) [@Bartman](https://forum.gl-inet.com/u/Bartman)\ **Post date:** [October 19, 2026, 4:48pm UTC](https://forum.gl-inet.com/t/flint-4-be-14000-discussion-thread/70944/176 "2026-10-19T16:48:43Z")
It would be nice to see a router that you can add your own memory modules and you would only need DDR4. Imagine that, GL.iNet could be the first to implement it and start a new wave of super routers. Heaven....... ---
**Author:** ![Pro4TLZZ](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/p/cab0a1/32.png) [@Pro4TLZZ](https://forum.gl-inet.com/u/Pro4TLZZ)\ **Post date:** [October 19, 2026, 5:10pm UTC](https://forum.gl-inet.com/t/flint-4-be-14000-discussion-thread/70944/177 "2026-10-19T17:10:17Z")
and whatever NVME/SSD storage you want as well. ---
**Author:** ![michalko58](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/m/a3d4f5/32.png) [@michalko58](https://forum.gl-inet.com/u/michalko58)\ **Post date:** [October 19, 2026, 6:40pm UTC](https://forum.gl-inet.com/t/flint-4-be-14000-discussion-thread/70944/178 "2026-10-19T18:40:45Z")
Even Turris Omnia by CZ.nic does not have the possibility to add RAM (but you can add SSD or change wifi card). But it would be great to have such router with possibility to add RAM, SSD or change wifi cards etc. ---
**Author:** ![packetmonkey](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/packetmonkey/32/16711_2.png) [@packetmonkey](https://forum.gl-inet.com/u/packetmonkey)\ **Post date:** [October 19, 2026, 8:08pm UTC](https://forum.gl-inet.com/t/flint-4-be-14000-discussion-thread/70944/179 "2026-10-19T20:08:34Z")
They have this - you can install router software on a minipc and do everything you are asking for lol and might even save a little money by doing it yourself. ---
**Author:** ![Azert](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/a/7cd45c/32.png) [@Azert](https://forum.gl-inet.com/u/Azert)\ **Post date:** [October 19, 2026, 8:41pm UTC](https://forum.gl-inet.com/t/flint-4-be-14000-discussion-thread/70944/180 "2026-10-19T20:41:06Z")
Hello everyone, I am experiencing persistent wired network disconnections on my GL-BE14000 (Flint 4) running the latest beta firmware based on **OpenWrt 25.12**. **The Problem:** Every few minutes, the wired LAN connection completely drops for a few seconds and then reconnects. During these drops, `dmesg` shows constant PHY link state changes (link down / link up). Wi-Fi, however, works flawlessly without any disconnections. **Troubleshooting I've already tried:** - Disabled Hardware Acceleration (set Network Acceleration to Software/None). - Disabled all proxy/VPN software (Tachyon). - Tested different Ethernet cables (known good Cat6). - Tested different LAN ports on the router. None of these steps solved the issue. The drops persist on the wired connection. **Relevant logs from** `dmesg`: kern.info kernel: [2491.944302] yt92xx yt92xx.0: eth1.1(port 2, lan3) link down kern.info kernel: [2494.024730] yt92xx yt92xx.0: eth1.1(port 2, lan3) link up, speed 2.5Gbps kern.info kernel: [2528.344233] yt92xx yt92xx.0: eth1.1(port 2, lan3) link down kern.info kernel: [2531.464673] yt92xx yt92xx.0: eth1.1(port 2, lan3) link up, speed 2.5Gbps _(Additionally, in earlier logs, the system showed_ `NETDEV WATCHDOG: transmit queue ... timed out` _followed by_ `warm reset failed`). **My Firmware Version:** 4.11 beta 4 It seems like there might be a driver regression in the `mtk_soc_eth` driver in the OpenWrt 25.12 branch. Is anyone else facing this wired connection issue? Are the developers aware of this, and is there a fix planned in the next beta release? Thanks. ---
**Author:** ![RBzee](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/rbzee/32/27823_2.png) [@RBzee](https://forum.gl-inet.com/u/RBzee)\ **Post date:** [October 22, 2026, 1:07am UTC](https://forum.gl-inet.com/t/flint-4-be-14000-discussion-thread/70944/181 "2026-10-22T01:07:36Z")
I also get the best performance with Parallel requests. In addition, I enable Optimistic caching. ![Screenshot_20261021_181506_Chrome](https://forum-static.gl-inet.com/original/3X/f/1/f14188f218a70ee5bb819b21a02c61339eedca7d.jpeg) ---
**Author:** ![skywizard](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/skywizard/32/34573_2.png) [@skywizard](https://forum.gl-inet.com/u/skywizard)\ **Post date:** [October 22, 2026, 1:17am UTC](https://forum.gl-inet.com/t/flint-4-be-14000-discussion-thread/70944/182 "2026-10-22T01:17:07Z")
I am using ADGH Beta, load balancing, with the average upstream responce time for the past 24 hours being 6ms. That works for me. ---
**Author:** ![charles2](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/c/9dc877/32.png) [@charles2](https://forum.gl-inet.com/u/charles2)\ **Post date:** [October 23, 2026, 3:50am UTC](https://forum.gl-inet.com/t/flint-4-be-14000-discussion-thread/70944/183 "2026-10-23T03:50:54Z")
Hi, Thank you for sharing the details of your troubleshooting. To better understand your situation, could you please provide the following information? 1. Is your wired device connected directly to the Flint 4, or through a switch? 2. Could you please connect another device using the same Ethernet cable and LAN port to check whether it experiences the same disconnections? 3. When the issue occurs again, could you please log in to the router via SSH and execute the following commands? ```sh ip -s link ``` Please also export the logs and send them to us via private message. Thank you for your assistance. ---
**Author:** ![eightace](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/e/8e8cbc/32.png) [@eightace](https://forum.gl-inet.com/u/eightace)\ **Post date:** [October 23, 2026, 10:46am UTC](https://forum.gl-inet.com/t/flint-4-be-14000-discussion-thread/70944/184 "2026-10-23T10:46:11Z")
It was fixed by changing WiFi region in openwrt via Luci ---
**Author:** ![Void](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/void/32/36696_2.png) [@Void](https://forum.gl-inet.com/u/Void)\ **Post date:** [October 24, 2026, 9:47am UTC](https://forum.gl-inet.com/t/flint-4-be-14000-discussion-thread/70944/185 "2026-10-24T09:47:51Z")
New firmware version released: **GL.iNet GL-BE14000** · [4.11.0 beta5 build 1114](https://fw.gl-inet.com/firmware/be14000/testing/be14000-4.11.0_beta5-1114-1023-1792756895.bin) (2026-10-23 19:09:02)·OpenWrt 25.12-SNAPSHOT r32295+917-c25265953b·Linux 6.12.94 ---
**Author:** ![Azert](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/a/7cd45c/32.png) [@Azert](https://forum.gl-inet.com/u/Azert)\ **Post date:** [October 24, 2026, 10:45am UTC](https://forum.gl-inet.com/t/flint-4-be-14000-discussion-thread/70944/186 "2026-10-24T10:45:32Z")
On GL-BE14000 Beta 5, the Wi-Fi driver generates significantly fewer errors than Beta 4.11, but the issue is still not fully fixed. For example, ra0 now shows 167,039 RX packets with 32,664 errors/dropped, and I still see repeated kernel log messages: [WiFi@ERROR.PROTO](mailto:WiFi@ERROR.PROTO),eht\_dsc\_bitmap\_remap\_non\_eht\_bw() 180: hc\_radio\_query\_by\_wdev failed! This looks like a remaining MT7990/MT7996 driver issue. [Previous page](https://forum.gl-inet.com/t/flint-4-be-14000-discussion-thread/70944.md?page=8)