# Flint 4 (GL-BE14000): forwarded LAN client gets ~2.4 Gbps where the router itself gets ~5 Gbps — but both together do 7.8 Gbps

**URL:** <https://forum.gl-inet.com/t/flint-4-gl-be14000-forwarded-lan-client-gets-2-4-gbps-where-the-router-itself-gets-5-gbps-but-both-together-do-7-8-gbps/71223>\
**Category:** Router\
**Created:** [September 11, 2026, 12:12pm UTC](https://forum.gl-inet.com/t/flint-4-gl-be14000-forwarded-lan-client-gets-2-4-gbps-where-the-router-itself-gets-5-gbps-but-both-together-do-7-8-gbps/71223 "2026-09-11T12:12:32Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![will.qiu](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/w/b38774/32.png) [@will.qiu](https://forum.gl-inet.com/u/will.qiu)\
**Post date:** [September 11, 2026, 1:15pm UTC](https://forum.gl-inet.com/t/flint-4-gl-be14000-forwarded-lan-client-gets-2-4-gbps-where-the-router-itself-gets-5-gbps-but-both-together-do-7-8-gbps/71223/4 "2026-09-11T13:15:32Z")

</div>

Here is a community member who shared a test result of **8 Gbps+ on a PC with Flint 4** :

> [@Flint 4 BE-14000 Discussion Thread](https://forum.gl-inet.com/t/flint-4-be-14000-discussion-thread/70944/16):
>
> For anyone having doubts about Flint4 wifi capabilities, here's my testing runing on my Fold8, ideal conditions, 3 meters away, the flint is on a high location, no vpn, connected to MLO (5 and 6Ghz). Now running on the Flint directly (Maxed out Flints CPU capabilities since running here bypasses the HW acc and uses CPU) Running on my Desktop (10Gb NIC card)

Have you checked whether your PC itself has enough performance to sustain speeds above **10 Gbps**?

A long time ago, I encountered a case where a system could not even reach **1 Gbps** , and the cause turned out to be that the CPU was too old.

~~Also, if you are testing on Windows, it is worth checking the \*\*iPerf3 version/build\*\*. Some Windows builds have copy-related performance issues that prevent them from reaching high throughput:

[https://techcommunity.microsoft.com/blog/networkingblog/three-reasons-why-you-should-not-use-iperf3-on-windows/4117876](https://techcommunity.microsoft.com/blog/networkingblog/three-reasons-why-you-should-not-use-iperf3-on-windows/4117876)

 ~~

You may also want to try running an **iPerf3 server directly on the router** , or on another PC with a **10G-capable interface** , and test against that.

Edit: Just realized that the client is running Linux.

---

_[View the full topic](https://forum.gl-inet.com/t/flint-4-gl-be14000-forwarded-lan-client-gets-2-4-gbps-where-the-router-itself-gets-5-gbps-but-both-together-do-7-8-gbps/71223)._
