# Flint AX1800刷入新版第三方固件后无法跑满带宽

**URL:** <https://forum.gl-inet.com/t/flint-ax1800/18929>\
**Category:** Router\
**Created:** [December 14, 2021, 7:24am UTC](https://forum.gl-inet.com/t/flint-ax1800/18929 "2021-12-14T07:24:55Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![gianozdp2021](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/g/73ab20/32.png) [@gianozdp2021](https://forum.gl-inet.com/u/gianozdp2021)\
**Post date:** [December 14, 2021, 7:24am UTC](https://forum.gl-inet.com/t/flint-ax1800/18929/1 "2021-12-14T07:24:55Z")

</div>

介于出厂版openwrt版本低，导致安装插件太麻烦，所以我刷了一个第三方的openwrt版本，下面这个：  
[https://www.right.com.cn/forum/thread-6731542-1-1.html](https://www.right.com.cn/forum/thread-6731542-1-1.html)  
但是现在有一个问题，就是我500M的宽带根本跑不满，一般测下来最高也就180M左右（非高峰期），而且内网（路由器下接的群晖NAS）也只有18-20MB的拷贝速度。之前用原厂的固件都是可以跑满带宽的，内网也可以达到40MB的速度。根据之前你们邮箱回复我的建议，我已经将模式调整为AX，功率选择了最大的，但是还是没有什么效果。麻烦你们帮忙看一下，我的openwrt wifi设置是否存在问题，或者还有其他设置需要优化的。非常感谢！

 ![image](https://forum-static.gl-inet.com/original/2X/0/0eaf255abba99000f63f806bc3e6866cc052ab08.jpeg)  
 ![image](https://forum-static.gl-inet.com/original/2X/0/0eaf255abba99000f63f806bc3e6866cc052ab08.jpeg)

---

<div class="post-metadata">

**Author:** ![alzhao](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/a/5f9b8f/32.png) [@alzhao](https://forum.gl-inet.com/u/alzhao)\
**Post date:** [December 14, 2021, 9:22am UTC](https://forum.gl-inet.com/t/flint-ax1800/18929/2 "2021-12-14T09:22:47Z")

</div>

想问一下你测试用的电脑网卡是wifi5的吗？

有没有WiFi6的网卡测试一下速度呢？

---

<div class="post-metadata">

**Author:** ![gianozdp2021](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/g/73ab20/32.png) [@gianozdp2021](https://forum.gl-inet.com/u/gianozdp2021)\
**Post date:** [December 14, 2021, 10:45am UTC](https://forum.gl-inet.com/t/flint-ax1800/18929/3 "2021-12-14T10:45:40Z")

</div>

电脑是双十一新买的，支持wifi6的。问题就是，之前用出厂版固件是可以达到满速的。

---

<div class="post-metadata">

**Author:** ![bruce](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bruce/32/35649_2.png) [@bruce](https://forum.gl-inet.com/u/bruce)\
**Post date:** [October 29, 2025, 4:15am UTC](https://forum.gl-inet.com/t/flint-ax1800/18929/4 "2025-10-29T04:15:47Z")

</div>