Flint memory leak ？

Willowen · 2021-11-16T08:24:24.117Z

I have the same problem, my network after i connect to ax1800 reboots frequently, after i check it before reboot the memory total used by the process is 98%, after reboot the memory going back to 88%.

Please fix this memory leak problem

cafebug · 2021-11-16T08:48:34.546Z

after reboot, my Flint memory is around 73% then it will increase around 1% every day…

alzhao · 2021-11-16T08:53:05.880Z

Willowen:

after reboot the memory going back to 88%.

My memory usage after reboot is 66%. What server did you turn on?

Willowen · 2021-11-16T09:06:44.223Z

I only use adguardhome, i don’t install any addon.

Willowen · 2021-11-17T08:01:40.843Z

Today i disconnected my flint because memory leak and reboot problem and waiting for new firmware.

lizh · 2021-11-17T09:43:23.662Z

Hi cafebug:

Could you help me check some information?

Login via ssh ，then exec the following：
pid=$(pidof AdGuardHome);cat /proc/$pid/status

Then send me the screenshot.

Thanks!

cafebug · 2021-11-17T10:27:06.295Z

actually, I never have AdGuardHome turned on, so your command doesn’t work.

Ubermensch · 2021-11-18T11:41:31.949Z

Same problem for me. Memory at 96% but with adguard on

cafebug · 2021-11-18T11:44:21.327Z

Yes, the memory leaking problem is pita.

alzhao · 2021-11-18T11:46:45.162Z

Can you ssh to the router and use the following command to see if the RAM will drop?

echo '3' > /proc/sys/vm/drop_caches

Pls let me know the result.

cafebug · 2021-11-18T11:47:43.260Z

Let me try it and report back …

cafebug · 2021-11-18T11:51:40.763Z

Before & After Command: (It works ) (78% —> 62% )

alzhao · 2021-11-18T11:52:32.730Z

OK. Thanks very much.

Seems we identified the problem. Pls wait for the new firmware. Compiling asap.

alzhao · 2021-11-25T03:45:49.298Z

Pls try 3.207 from GL.iNet download center

morcheba · 2021-11-27T15:01:28.614Z

Hi @alzhao

I have the same issues even with firmware 3.207

https://forum.gl-inet.com/t/flint-low-memory/18501/4

lizh · 2021-12-16T08:31:38.171Z

Hi morcheba:

Memory is increased as the system runs. But will be freed when the system needs to use memory.

husncarter23 · 2022-03-14T22:08:33.530Z

same issue . crashing or rebooing after 30 mins

lizh · 2022-03-15T03:56:57.282Z

What is the firmware version?
Please update latest firmware: GL.iNet download center

Then open ‘enable crash log’

lQLPDhs89NlyH6zNA8nNB4CwYhGm7Z3aXgACNItSpMBeAA_1920_9691920×969 35.1 KB

husncarter23 · 2022-03-15T09:48:21.608Z

i found my problem . whene DLNA or file sharing is ON my router memory going to 95% or higher . i most disable DLNA and file sharing for fix my issue

photo_2022-03-15_13-21-54720×1280 42.3 KB

photo_2022-03-15_13-22-02720×1280 42.6 KB

Screenshot_11821×939 70 KB

Screenshot_21399×845 66 KB

glasnot · 2022-10-09T08:07:56.212Z

sry i asking on old thread. is this problem already fixed?
im on 3.214 my memory usage always 96%

i run your command and become 69%. is i need to execute this command regulary? is there negative effect?

im using adguard home too.

thanks