# Flint2 with Flint Site 2 site problem

**URL:** <https://forum.gl-inet.com/t/flint2-with-flint-site-2-site-problem/44226>\
**Category:** VPN, DNS, Leaks\
**Created:** [June 30, 2024, 10:04am UTC](https://forum.gl-inet.com/t/flint2-with-flint-site-2-site-problem/44226 "2024-06-30T10:04:51Z")\
**Posts on this page:** 1\
**Showing post:** 35

<div class="post-metadata">

**Author:** ![Razkle](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/r/858c86/32.png) [@Razkle](https://forum.gl-inet.com/u/Razkle)\
**Post date:** [July 9, 2024, 7:10pm UTC](https://forum.gl-inet.com/t/flint2-with-flint-site-2-site-problem/44226/35 "2024-07-09T19:10:21Z")

</div>

ok I went back to [Building a Site-2-Site network manually using two GL.iNet routers(SDK 4.X) - Technical Support for Routers / VPN, DNS, Leaks - GL.iNet (gl-inet.com)](https://forum.gl-inet.com/t/building-a-site-2-site-network-manually-using-two-gl-inet-routers-sdk-4-x/31479)

I applied the route from there with my numbers and BAM! Working as intended! The namespaces dont work but I will just assign IPs to each device and re-map all shared printers from the PCs IP.

 ![routerule](https://forum-static.gl-inet.com/original/3X/c/b/cbed3bf4c33297ce318a574c85643d2d9dc5e6e3.png)

This problem is resolved! thanks for all the help and pointers!

---

_[View the full topic](https://forum.gl-inet.com/t/flint2-with-flint-site-2-site-problem/44226)._