GL-A1300 Beta Testing Discussions

smiths · 2022-10-16T12:10:50.772Z

If I manually add the network via the GL interface, /etc/config/repeater adds:
config network
option ssid ‘JOLLYBOYZ16’
option key ‘85PutneyBridge!21’
option proto ‘dhcp’
option metric ‘20’
option scan ‘1’

if I then try to connect, I see the following in the log:

Sun Oct 16 12:56:03 2022 daemon.info repeater: (/usr/sbin/repeater:1250) scan finished
Sun Oct 16 12:56:04 2022 daemon.info repeater: (/usr/sbin/repeater:719) Switching…
Sun Oct 16 12:56:04 2022 daemon.err repeater: (/usr/sbin/repeater:584) skip bss with dfs channel: JOLLYBOYZ16 96:83:C4:19:93:27 56
Sun Oct 16 12:56:04 2022 daemon.err repeater: (/usr/sbin/repeater:728) not found matched BSS for ‘JOLLYBOYZ16’
Sun Oct 16 12:56:04 2022 daemon.err repeater: (/usr/sbin/repeater:584) skip bss with dfs channel: JOLLYBOYZ16 96:83:C4:19:93:27 56
Sun Oct 16 12:56:04 2022 daemon.err repeater: (/usr/sbin/repeater:667) not found available network, re-scan in 59 seconds…

If I replace the option scan ‘1’ with an appropriate bssid entry, and reboot the router (think it is necessary) I can connect.

So the problem appears to be in the repeater service, which I thinkis one of yours!

Simon

groentjuh · 2022-10-16T19:46:50.152Z

I did notice that as well and I believe I had reported that in the testreport. I did not hear anything about it.

hansome · 2022-10-17T04:14:50.931Z

a1300 doesn’t have DFS support as of certification. so repeater manager scan won’t see DFS channels.
axt1800 has option to enable DFS:

smiths:

Currently all SSID are disabled on the A1300.

This may be caused by scanning by iwinfo and repeater manager conflict.
Try

/etc/init.d/repeater stop

Before iwinfo scan.

smiths · 2022-10-17T06:45:15.560Z

Hi Hansome,

All SSID disabled on router, is not a bug - just my poor explanation.
I turned off all the client wifi in the wireless menu option to focus on the wlan connection.

My problem is:
Router UI does not see DFS channels in GL-iNet UI.
I have to bypass the UI and use UCI or edit repeater config file to connect.

Leaving my AXT1800 on 4.0.3 for now, everything works (and this setting is not there, so I am guessing defaults on).

If this is a regulatory issue, then I do not want to waste your time playing around with it. I can think of a couple of ways I can make it work - if I have to, enough for me. I have been spoiilt by the 4.x on AX1800/AXT1800

Simon

hansome · 2022-10-17T06:50:37.608Z

That is a regulatory issue indeed.

cafebug · 2022-11-02T13:31:16.134Z

Slate Plus firmware 4.1.0 release 6 is out: (very frequent release recently

image820×2034 76.5 KB

Download here: https://github.com/gl-inet/gl-infra-builder/releases/download/v4.1.0_a1300_release6/a1300.tar.gz

cafebug · 2022-11-04T08:07:04.306Z

By the way, the github a1300 4.1.0 release 6 file has been pulled and now it’s available on GL-iNET official download site.

Download here:

https://fw.gl-inet.com/firmware/snapshots/20221102_4.1.0_release6/a1300/openwrt-a1300-4.1.0-1102-1667483487.tar

cafebug · 2022-11-08T12:35:08.382Z

well, Slate Plus firmware 4.1.0 release 8 is out:

image827×1981 78.5 KB

Download here: https://github.com/gl-inet/gl-infra-builder/releases/download/v4.1.0_a1300_release8/a1300.tar.gz

lenovomi · 2022-12-04T14:52:53.176Z

hello,
is there a plan to allow DFS scan in repeater mode on a1300? or do i need other hw?

alzhao · 2022-12-05T10:33:53.713Z

You can just use Luci I think.

lenovomi · 2022-12-05T11:38:47.892Z

@alzhao i dont get it, use Luci for what? thanks

alzhao · 2022-12-05T11:55:13.704Z

Use luci to configure repeater to connect DFS WiFi.

lenovomi · 2022-12-05T13:00:49.648Z

@alzhao
do i need to install luci or its already there? thanks

alzhao · 2022-12-05T13:12:02.855Z

It is already there.

lenovomi · 2022-12-05T16:19:00.050Z

but how to access it? its different port? or?

lostdog · 2022-12-05T16:52:55.751Z

Advanced options from the menu. Takes you to luci.

lenovomi · 2022-12-05T19:25:09.740Z

@lostdog yes but i cant see there Scan option for repeater, maybe i am in wrong config section?

image1209×774 62.9 KB

bright_plastik · 2022-12-05T23:15:27.159Z

Google is your friend.

wcs2228 · 2022-12-06T01:10:25.450Z

Try clicking on the Scan button next to radio1. It looks like the router WWAN is already connected as a client to SSID OpenWrt_5Ghz as a repeater.

I do not work for and I am not directly associated with GL.iNet

lenovomi · 2022-12-06T11:24:30.829Z

yes but once i connect to that 5ghz dfs network ; a1300 5ghz adapter in ap mode disappered

image1298×850 66 KB

i cant connect only to 2g wifi of a1300
now i cant connect to any non DFS 5g ap … getting all the time

Timeout in response. Please check the network environment or reboot the device.