GL-AP1300 LTE Openwrt

wait4ever · 2022-03-08T09:31:52.467Z

Hi Everyone,

Do you know if it’s possible to flash GL-AP1300 LTE with one of the last OpenWrt releases (21.xx or at least 19.xx )?

I’m trying to flash it using Uboot and Sysupgrade but it’s not working :

No result with Uboot
With Sysupgrade :
"sysupgrade openwrt-21.02.0-ipq40xx-generic-glinet_gl-ap1300-squashfs-nand-sysupgrade.bin

openwrt-21.02.0-ipq40xx-generic-glinet_gl-ap1300-squashfs-nand-sysupgrade.bin is not a valid FIT image

Image check ‘platform_check_image’ failed."

Thanks in advance for your help.

Regards,

alzhao · 2022-03-08T11:00:45.546Z

wait4ever:

No result with Uboot

You mean that after uboot flash the router does not boot?

the .bin file should be flashed using uboot.

wait4ever · 2022-03-09T07:44:04.218Z

Thanks for replying.

Using Uboot flash method I can get to the web page where I can upload the .bin file.

I can upload the file, it seems to do something, but after few minutes, the led keep blinking faster, the router seems not to reboot and openwrt is not installed.

I don’t know what am I missing here. Maybe the wrong file ? am using the following one:
https://downloads.openwrt.org/releases/21.02.2/targets/ipq40xx/generic/openwrt-21.02.2-ipq40xx-generic-glinet_gl-ap1300-squashfs-nand-sysupgrade.bin

alzhao · 2022-03-09T10:16:29.589Z

Can you try this one

image1409×941 72.3 KB

wait4ever · 2022-03-12T13:22:05.651Z

Oh my God,

I don’t know how I can thank you. Its working !!

I was struggling with this issue since several weeks and you just saved me !

Thanks again for your help (Sorry for le bad english).