GL-AR300 dropbear sshd prompting for password always

droidvideo · 2018-10-18T18:31:42.132Z

This is my 2nd GL AR300 and I am trying to set it up. I had ssh port forwarding enabled on port 2222. I have added my pub key to /root/.ssh/authorized_keys. When I try to ssh, I am still prompted for password. My old AR300 had pre-LEDE build on it. The ssh worked with public key flawlessly.

I spent an hour so far trying to get this working, but making no progress. Appreciate any help.
Below is how I uploaded public key:
++++++++++++++++++++++++++++++++++++
[~/work/glinet] ssh-copy-id -i ~/.ssh/id_rsa -p 2222 root@10.173.35.155
/usr/bin/ssh-copy-id: INFO: Source of key(s) to be installed: “/c/Users/droidvideo/.ssh/id_rsa.pub”
/usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already installed
/usr/bin/ssh-copy-id: INFO: 1 key(s) remain to be installed – if you are prompted now it is to install the new keys
root@10.173.35.155’s password:

Number of key(s) added: 1

Now try logging into the machine, with: “ssh -p ‘2222’ ‘root@10.173.35.155’”
and check to make sure that only the key(s) you wanted were added.

[~/work/glinet]
[~/work/glinet] ssh -p ‘2222’ -i ~/.ssh/id_rsa ‘root@10.173.35.155’
root@10.173.35.155’s password:

++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Thanks

heytrey · 2018-10-18T21:58:22.707Z

Have you tried to add your ssh key via luci? You can find it under System > Administration

droidvideo · 2018-10-18T22:27:19.443Z

I did. I also checked authorized_keys under /etc/… folder. That didn’t make any difference

sammo · 2018-10-19T08:17:11.561Z

You need to add to /etc/dropbear/authorized_keys

droidvideo · 2018-10-19T15:52:29.229Z

I did that too. That didn’t work. I deleted and recreated /etc/dropbear/authorized_key file. Then I did “/etc/init.d/dropbear restart” and reload. Then it worked.