1

I’m running into a problem with AdGuard Home on GL-AX1800. When I leave the router running for 1/2 day - 1 day with AdGuard running, network speeds degrade precipitously to the point where the router either has to be rebooted or AdGuard has to be disabled.

Any fixes or work arounds I can try?

2

I am running AdguardHome now for 1 day and I do not have problem. The memory usage is also correct.

Can you let me know what you have set in Adguard? Do you have a lot of queries?

3

For me memory usage is at 96%

4

Can you ssh to the router and use the following command to see if the RAM will drop?

echo '3' > /proc/sys/vm/drop_caches

Pls let me know the result.

1 Like
5

I tried leaving it running for 8 hours. I had 9,940 DNS queries in that time. Domain resolution became unresponsive, network speeds dropped to unusable levels (not even testable).

6

Thank you very much for your feedback. I’m going to verify that.

7

I use adguard home :pensive:

8

I tried this command, my ax1800 memory never go down bellow 80% even i turn off adguardhome, but after i used that command my memory usage now become 70%.

9

As of the 3.207 update, AdGuard will no longer start.

1 Like
10

Confirmed same here. Internet access is disabled in my case since adguard is stuck in a limbo and I can only go online after disabling adguard then rebooting the router.

11

I am on 3.207 for few of days now and do not have any problems with AdGuard.

Screenshot 2021-12-01 at 14.59.55
Screenshot 2021-12-01 at 14.59.552050×486 86.8 KB

12

@alzhao I’m using 3.207, before running echo '3' > /proc/sys/vm/drop_caches my available memory is 8%. After running the command, available memory is 15%

13

Just updated to 3.207… A COMPLETE DISASTER! AdGuard Home won’t work. Have to disable it to get online…

14

Hi @briar-spoon-celibate :

Please update AdguardHome(0.106.3-1) in Plug-in.

image
image1300×622 30.9 KB

15

Hi fmccann:

You should have updated AdguardHome.

Please reinstall AdguardHome(0.106.3).

16

Please reinstall AdguardHome(0.106.3).

17

After Reinstalling, I now get the error “API is unavailable”

Screen Shot 2021-12-02 at 7.49.54 AM
Screen Shot 2021-12-02 at 7.49.54 AM2786×1156 266 KB

18

Got the same error “API is unavailable” after upgrade my AdGuardHome to 0.106.3, rebooting the router doesn’t help either, now I can’t use AdGuardHome.

19

Try to install gl-agh-stats i think that’s needed as well

2 Likes
20

@hieudo

Sorry,gl-agh-stats was uninstalled due to uninstalled Adguardhome(0.104.3)

  • The procedure is as follows:
    1,Disabled Adguardhome,then unistall Adguardhome(0.104.3)
    2,install Adguardhome(0.106.3) and gl-agh-stats
3 Likes