GL-AX1800 + AdGuard Home

alzhao · 2021-11-18T03:00:07.381Z

I am running AdguardHome now for 1 day and I do not have problem. The memory usage is also correct.

Can you let me know what you have set in Adguard? Do you have a lot of queries?

Ubermensch · 2021-11-18T11:34:50.670Z

For me memory usage is at 96%

alzhao · 2021-11-18T11:50:17.269Z

Can you ssh to the router and use the following command to see if the RAM will drop?

echo '3' > /proc/sys/vm/drop_caches

Pls let me know the result.

fmccann · 2021-11-18T12:07:54.826Z

I tried leaving it running for 8 hours. I had 9,940 DNS queries in that time. Domain resolution became unresponsive, network speeds dropped to unusable levels (not even testable).

lizh · 2021-11-18T12:21:34.976Z

Thank you very much for your feedback. I’m going to verify that.

Ubermensch · 2021-11-18T13:03:21.478Z

I use adguard home

Willowen · 2021-11-18T17:24:40.302Z

I tried this command, my ax1800 memory never go down bellow 80% even i turn off adguardhome, but after i used that command my memory usage now become 70%.

fmccann · 2021-12-01T14:35:10.260Z

As of the 3.207 update, AdGuard will no longer start.

Blazehtsh · 2021-12-01T14:46:32.821Z

Confirmed same here. Internet access is disabled in my case since adguard is stuck in a limbo and I can only go online after disabling adguard then rebooting the router.

morcheba · 2021-12-01T15:01:31.773Z

I am on 3.207 for few of days now and do not have any problems with AdGuard.

Screenshot 2021-12-01 at 14.59.552050×486 86.8 KB

hieudo · 2021-12-01T18:53:08.675Z

@alzhao I’m using 3.207, before running echo '3' > /proc/sys/vm/drop_caches my available memory is 8%. After running the command, available memory is 15%

briar-spoon-celibate · 2021-12-01T20:06:29.476Z

Just updated to 3.207… A COMPLETE DISASTER! AdGuard Home won’t work. Have to disable it to get online…

lizh · 2021-12-02T08:57:32.245Z

Hi @briar-spoon-celibate :

Please update AdguardHome(0.106.3-1) in Plug-in.

image1300×622 30.9 KB

lizh · 2021-12-02T09:00:18.526Z

Hi fmccann:

You should have updated AdguardHome.

Please reinstall AdguardHome(0.106.3).

lizh · 2021-12-02T09:02:10.915Z

Please reinstall AdguardHome(0.106.3).

fmccann · 2021-12-02T12:51:09.338Z

After Reinstalling, I now get the error “API is unavailable”

Screen Shot 2021-12-02 at 7.49.54 AM2786×1156 266 KB

hieudo · 2021-12-02T17:01:13.650Z

Got the same error “API is unavailable” after upgrade my AdGuardHome to 0.106.3, rebooting the router doesn’t help either, now I can’t use AdGuardHome.

Exile1975 · 2021-12-02T17:41:57.121Z

Try to install gl-agh-stats i think that’s needed as well

lizh · 2021-12-03T04:05:36.641Z

@hieudo

Sorry,gl-agh-stats was uninstalled due to uninstalled Adguardhome(0.104.3)

The procedure is as follows:
1,Disabled Adguardhome,then unistall Adguardhome(0.104.3)
2,install Adguardhome(0.106.3) and gl-agh-stats

hieudo · 2021-12-03T05:00:19.898Z

Thanks @Exile1975 and @lizh I was able to upgrade AdGuardHome to 0.106.3 but I had to setup it again, my settings for 0.104.3 was cleared after the upgrade