GL-AX1800 + AdGuard Home

alzhao · 2021-11-18T11:50:17.269Z

Can you ssh to the router and use the following command to see if the RAM will drop?

echo '3' > /proc/sys/vm/drop_caches

Pls let me know the result.

fmccann · 2021-11-18T12:07:54.826Z

I tried leaving it running for 8 hours. I had 9,940 DNS queries in that time. Domain resolution became unresponsive, network speeds dropped to unusable levels (not even testable).

lizh · 2021-11-18T12:21:34.976Z

Thank you very much for your feedback. I’m going to verify that.

Ubermensch · 2021-11-18T13:03:21.478Z

I use adguard home

Willowen · 2021-11-18T17:24:40.302Z

I tried this command, my ax1800 memory never go down bellow 80% even i turn off adguardhome, but after i used that command my memory usage now become 70%.

fmccann · 2021-12-01T14:35:10.260Z

As of the 3.207 update, AdGuard will no longer start.

Blazehtsh · 2021-12-01T14:46:32.821Z

Confirmed same here. Internet access is disabled in my case since adguard is stuck in a limbo and I can only go online after disabling adguard then rebooting the router.

morcheba · 2021-12-01T15:01:31.773Z

I am on 3.207 for few of days now and do not have any problems with AdGuard.

Screenshot 2021-12-01 at 14.59.552050×486 86.8 KB

hieudo · 2021-12-01T18:53:08.675Z

@alzhao I’m using 3.207, before running echo '3' > /proc/sys/vm/drop_caches my available memory is 8%. After running the command, available memory is 15%

briar-spoon-celibate · 2021-12-01T20:06:29.476Z

Just updated to 3.207… A COMPLETE DISASTER! AdGuard Home won’t work. Have to disable it to get online…

lizh · 2021-12-02T08:57:32.245Z

Hi @briar-spoon-celibate :

Please update AdguardHome(0.106.3-1) in Plug-in.

image1300×622 30.9 KB

lizh · 2021-12-02T09:00:18.526Z

Hi fmccann:

You should have updated AdguardHome.

Please reinstall AdguardHome(0.106.3).

lizh · 2021-12-02T09:02:10.915Z

Please reinstall AdguardHome(0.106.3).

fmccann · 2021-12-02T12:51:09.338Z

After Reinstalling, I now get the error “API is unavailable”

Screen Shot 2021-12-02 at 7.49.54 AM2786×1156 266 KB

hieudo · 2021-12-02T17:01:13.650Z

Got the same error “API is unavailable” after upgrade my AdGuardHome to 0.106.3, rebooting the router doesn’t help either, now I can’t use AdGuardHome.

Exile1975 · 2021-12-02T17:41:57.121Z

Try to install gl-agh-stats i think that’s needed as well

lizh · 2021-12-03T04:05:36.641Z

@hieudo

Sorry,gl-agh-stats was uninstalled due to uninstalled Adguardhome(0.104.3)

The procedure is as follows:
1,Disabled Adguardhome,then unistall Adguardhome(0.104.3)
2,install Adguardhome(0.106.3) and gl-agh-stats

hieudo · 2021-12-03T05:00:19.898Z

Thanks @Exile1975 and @lizh I was able to upgrade AdGuardHome to 0.106.3 but I had to setup it again, my settings for 0.104.3 was cleared after the upgrade

golkioa · 2021-12-03T13:08:17.190Z

After the update to 3.207, AdGuardHome did not work for me (version 0.106.3 was working before the update ). The Plugins page indicated the latest (0.106.3) was intalled and offered only the uninstall option.
However, in the ssh console, the system showed (opkg list-installed) version 0.104.3 was installed. Therefore, I ran opkg upgrade AdGuardHome, then /etc/init.d/AdGuardHome start and everything is working now.

Blazehtsh · 2021-12-03T15:50:01.509Z

Thank you I will try your fix and see how it goes. Appreciate the details very much.

Thanks.