# GL-AXT1800 Tailscale update

**URL:** <https://forum.gl-inet.com/t/gl-axt1800-tailscale-update/31468>\
**Category:** Router\
**Created:** [July 16, 2023, 11:43pm UTC](https://forum.gl-inet.com/t/gl-axt1800-tailscale-update/31468 "2023-07-16T23:43:15Z")\
**Posts on this page:** 1\
**Showing post:** 54

<div class="post-metadata">

**Author:** ![bring.fringe18](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bring.fringe18/32/11777_2.png) [@bring.fringe18](https://forum.gl-inet.com/u/bring.fringe18)\
**Post date:** [January 28, 2024, 7:21am UTC](https://forum.gl-inet.com/t/gl-axt1800-tailscale-update/31468/54 "2024-01-28T07:21:26Z")

</div>

I don’t see why this workaround wouldn’t still work but I don’t use Tailscale:

> [@Tailscale settings lost on reboot](https://forum.gl-inet.com/t/tailscale-settings-lost-on-reboot/31524/19):
>
> Yeah I see that now after you posted that dir list. The more I look at this the more it seems all so familar: This is untested code to enable exit nodes I never got feedback on from someone else but here: sed '/param="$param --exit-node-allow-lan-access --exit-node=$exit\_node\_ip"/a\ param=“$param --advertise-exit-node --allow-exit-node --allow-routes”' /usr/bin/gl\_tailscale \>\> \ /usr/bin/gl\_tailscale.new && mv /usr/bin/gl\_tailscale /usr/bin/gl\_tailscale.stock \ && mv /u…

---

_[View the full topic](https://forum.gl-inet.com/t/gl-axt1800-tailscale-update/31468)._