# GL-AXT1800 Wireguard access home LAN

**URL:** <https://forum.gl-inet.com/t/gl-axt1800-wireguard-access-home-lan/36677>\
**Category:** VPN, DNS, Leaks\
**Created:** [December 31, 2023, 7:55am UTC](https://forum.gl-inet.com/t/gl-axt1800-wireguard-access-home-lan/36677 "2023-12-31T07:55:22Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Barometer](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/b/f6c823/32.png) [@Barometer](https://forum.gl-inet.com/u/Barometer)\
**Post date:** [December 31, 2023, 7:55am UTC](https://forum.gl-inet.com/t/gl-axt1800-wireguard-access-home-lan/36677/1 "2023-12-31T07:55:22Z")

</div>

I’ve connected my Slate AX to public wifi and successfully set up a Wireguard VPN connection to my Draytek router at home.

When I visit a whatsmyip website it shows the IP of my internet connection at home.

I’ve also enabled the ‘Allow Remote Access LAN’ option in the settings of the Wireguard client.

However, I’m not able to connect to the devices on my home LAN.

To be sure the Wireguard configuration is correct, I’ve also imported the Wireguard config on my mobile phone and connected directly to my home LAN using the Wireguard client on my phone. In this case I can connect to the devices on my home LAN.

Any ideas on what I might be missing?

---

<div class="post-metadata">

**Author:** ![Barometer](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/b/f6c823/32.png) [@Barometer](https://forum.gl-inet.com/u/Barometer)\
**Post date:** [December 31, 2023, 11:18am UTC](https://forum.gl-inet.com/t/gl-axt1800-wireguard-access-home-lan/36677/2 "2023-12-31T11:18:32Z")

</div>

Maybe good to mention that the Slate AX is running with mosly default configuration such as LAN ip 192.168.8.x and my router home LAN runs on 10.2.90.x

Allowed IP’s in the Wireguard config is set to:  
10.2.90.0/24, 0.0.0.0/0

---

<div class="post-metadata">

**Author:** ![bring.fringe18](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bring.fringe18/32/11777_2.png) [@bring.fringe18](https://forum.gl-inet.com/u/bring.fringe18)\
**Post date:** [December 31, 2023, 11:22am UTC](https://forum.gl-inet.com/t/gl-axt1800-wireguard-access-home-lan/36677/3 "2023-12-31T11:22:26Z")

</div>

Substitute Flint (GL-AX1800) for Draytek:

> [@Building a Site-2-Site network manually using two GL.iNet routers(SDK 4.X)](https://forum.gl-inet.com/t/building-a-site-2-site-network-manually-using-two-gl-inet-routers-sdk-4-x/31479):
>
> This post is to introduce the guide to config WireGuard LAN to LAN VPN (Site-2-Site) based on GL-iNet SDK 4.X fimrware. Supported Models Router Model Stable Beta GL-MT3000 (Beryl AX) √ - GL-AXT1800 (Slate AX) √ - GL-A1300 (Slate Plus) √ - GL-X3000 (Spitx AX) √ - GL-AX1800 (Flint) √ - GL-MT2500 (Brume 2) √ - GL-AR300M (shadow) - √ GL-MT300N-V2 (Mango) - √ GL-E750 (Mudi) - √ GL-SFT1200 (Opal) - √ GL-MT1300 (Beryl) - √ GL-X750 (Spitz) - √ GL-XE300 (Pul…

---

<div class="post-metadata">

**Author:** ![bruce](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bruce/32/35649_2.png) [@bruce](https://forum.gl-inet.com/u/bruce)\
**Post date:** [October 29, 2025, 4:28am UTC](https://forum.gl-inet.com/t/gl-axt1800-wireguard-access-home-lan/36677/4 "2025-10-29T04:28:56Z")

</div>