GL-E750 firmware ROOTer

alzhao · 2022-08-01T12:34:50.695Z

Pls give me the exact file you used. I will have a try.

Moby010 · 2022-08-01T12:54:19.280Z

Uploading: GL-E750-GO2022-07-27-AB21.zip…
this firmware was recommended to me on the rooter forum

DropMeFiles – free one-click file sharing service

Share your pictures, send large videos, exchange music or transfer big files. No registration required. Unlimited upload/download speed.

or please give me a working firmware from ROOTer

Moby010 · 2022-09-07T14:46:25.807Z

I tried to install openwrt first and then install the ROOter firmware from it, I also got a rebut, maxim that I could log in to the login and password after which I received the router dump

alzhao · 2022-09-07T15:22:56.838Z

Sorry missed this.

The firmware doesn’t not boot? Can you use uboot to flash new firmware?

Moby010 · 2022-09-07T15:35:01.693Z

I flashed both through the web interface and using uboot, I also tried to install openwrt first and install ROOter through its web interface, in all cases I get reboots, at most I managed to go to the starting country of ROOter, after which I received reboots, and I observed an unknown device in the network card

Moby010 · 2022-09-08T10:03:59.208Z

I recorded a video with an error, watch it

alzhao · 2022-09-09T09:54:27.030Z

Sorry. I tried and it is the same.

The firmware cannot boot.

I gave up.

A lot of people used ROOter firmware in our other products and then flashed back the stock firmware. So I think no need to try.

Moby010 · 2022-09-09T10:21:30.154Z

I downloaded a clean openwrt firmware today and installed it on the router, the firmware worked until I installed the modemmanager package, after that I get a constant reboot of the router, just like on the ROOter firmware

alzhao · 2022-09-10T05:22:40.833Z

Pls flash back the stock firmware. Maybe this is the only way.

67firebird455 · 2022-09-11T01:31:44.180Z

I had the same problem with My GL-E750, no matter which image or way (luci also), it wouldn’t boot all the way up, and I’d be forced to flash factory firmware back onto the unit. 3.215 Beta 3 has been game changing on this, and the AP1300 I’m testing. Very happy so far with this image.

Moby010 · 2022-09-19T03:54:29.593Z

I got the firmware NOR on the rooter forum, and it started on gl-e750, but when I turn on wifi 5ghz, I get a constant reboot of gl-e750 after restarting the router, can you solve the problem with 5ghz?
https://disk.yandex.ru/d/rSZsbn7hdYjUQw

alzhao · 2022-09-19T08:08:35.235Z

Pls don’t run ROOter on E750. It does not work well.

Moby010 · 2022-09-19T15:08:16.015Z

well, then please tell me how to run other models on the mudi firmware, such as em12g em160 T77W968 Fibocom L860/L850? not one of them, the mudi firmware cannot adequately run.
this problem has already surfaced, and there is no solution, that’s why I want to run the ROOTer firmware, since it sees them perfectly and launches modules, I have already checked

alzhao · 2022-09-20T07:52:57.596Z

Moby010:

em12g em160 T77W968 Fibocom L860/L850?

Did you use m2 to pcie adatper and connect these modules?

Moby010 · 2022-09-20T09:24:52.701Z

yes, I connected pcie adatper, I run both 968 and em160, both of them worked in 3g, but I was able to run em160 in 4g through raw IP changes, and I did not understand how to run 968 in 4g, both modules worked on the ROOter firmware and 4g

alzhao · 2022-09-20T09:42:39.442Z

I think we can add some new Quectel modems in our firmware 4.x, and release an upgrade.

It takes some time though

Moby010 · 2022-09-20T09:58:41.581Z

I will hope very well that you will release the necessary firmware for the models, by the way Fibocom L860 also launched on the mudi firmware and it immediately identified the operator and the Internet appeared, also on the 3g network, I think the wrong port for the models is set

Screenshot_2022-09-09-19-34-18-720_com.android.chrome1080×2400 158 KB

Screenshot_2022-09-09-19-14-32-254_com.android.chrome1080×2400 206 KB

IMG_20220909_1849051920×2560 348 KB

alzhao · 2022-09-20T10:32:09.086Z

Moby010:

Fibocom L860

Does this module work well?

Moby010 · 2022-09-20T12:30:19.396Z

yes, it works, there is Internet, but as I wrote above, it works in 3g (umts)on mudi firmware, 4g was launched on the ROOter 860 firmware
I edited the code file qmi.sh and I got 4g internet on em160, it turns out the problem is in this file, for qmi quectel mode
uqmi -s -d /dev/cdc-wdm0
but the patch didn’t help me launch in 4g lte 860 and 968

bolt109 · 2024-07-28T08:27:49.018Z

Good afternoon. Please tell me, did you manage to set up the Fibocom L860/L850?