# GL-iNet AX1800 OpenWrt firmware

**URL:** <https://forum.gl-inet.com/t/gl-inet-ax1800-openwrt-firmware/19447>\
**Category:** Router\
**Created:** [January 9, 2022, 12:28pm UTC](https://forum.gl-inet.com/t/gl-inet-ax1800-openwrt-firmware/19447 "2022-01-09T12:28:24Z")\
**Posts on this page:** 20\
**Page:** 13

<div class="post-metadata">

**Author:** ![vernie](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/v/0ea827/32.png) [@vernie](https://forum.gl-inet.com/u/vernie)\
**Post date:** [June 11, 2023, 12:15am UTC](https://forum.gl-inet.com/t/gl-inet-ax1800-openwrt-firmware/19447/246 "2023-06-11T00:15:26Z")

</div>

The Flashing instruction on this page below can lead to the same problem I just have on my router.

> **[Google](https://flint.solidus1983.duckdns.org/?snapshots%2Fr23162%2Ftargets%2Fipq60xx%2Fgeneric)**
>
> Celebrating Scones! #GoogleDoodle

It was only cleared here:

![Screenshot from 2023-06-11 08-11-29](https://forum-static.gl-inet.com/original/2X/5/519b6f463edcfb0a4de8e8767e06c5ce9102aea9.png)

It should be clear that more people will not fall to the same problem.

---

<div class="post-metadata">

**Author:** ![danbratu](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/d/838e76/32.png) [@danbratu](https://forum.gl-inet.com/u/danbratu)\
**Post date:** [June 11, 2023, 10:59am UTC](https://forum.gl-inet.com/t/gl-inet-ax1800-openwrt-firmware/19447/247 "2023-06-11T10:59:12Z")

</div>

1. re-flash uboot first using link [http://192.168.1.1/uboot.html](http://192.168.1.1/uboot.html)
2. flash the firmware (.ubi file) using [http://192.168.1.1/](http://192.168.1.1/)

---

<div class="post-metadata">

**Author:** ![vernie](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/v/0ea827/32.png) [@vernie](https://forum.gl-inet.com/u/vernie)\
**Post date:** [June 11, 2023, 11:20am UTC](https://forum.gl-inet.com/t/gl-inet-ax1800-openwrt-firmware/19447/248 "2023-06-11T11:20:49Z")

</div>

Thank you for the additional info. It is too late for me to do that now, the router LED no longer show light when powered on and no flashing light during reset procedure.

---

<div class="post-metadata">

**Author:** ![solidus1983](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/solidus1983/32/6181_2.png) [@solidus1983](https://forum.gl-inet.com/u/solidus1983)\
**Post date:** [June 11, 2023, 11:42am UTC](https://forum.gl-inet.com/t/gl-inet-ax1800-openwrt-firmware/19447/249 "2023-06-11T11:42:35Z")

</div>

If you can come up with some instructions would be more then happy to use them right now I am busy between work and this.

Also which file did you flash to uboot page side?

---

<div class="post-metadata">

**Author:** ![vernie](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/v/0ea827/32.png) [@vernie](https://forum.gl-inet.com/u/vernie)\
**Post date:** [June 11, 2023, 12:07pm UTC](https://forum.gl-inet.com/t/gl-inet-ax1800-openwrt-firmware/19447/250 "2023-06-11T12:07:07Z")

</div>

It is this instruction that I followed:

Release the reset pin and head to [http://192.168.1.1](http://192.168.1.1) , If you are flashing uboot then head to [http://192.168.1.1/uboot.html](http://192.168.1.1/uboot.html)  
Then select openwrt-ipq60xx-generic-glinet\_gl-ax1800-squashfs-nand-factory.ubi image and flash.

I thought openwrt-ipq60xx-generic-glinet\_gl-ax1800-squashfs-nand-factory.ubi is uboot and should go to [http://192.168.1.1/uboot.html](http://192.168.1.1/uboot.html)

It was out of excitement for this firmware that I did not read any further on other pages of information like how to debrick, it was my biggest mistake.

I am happy to help with the writing of instructions people can use, all I need is the correct info what each file is and where to write them and the sequence if sequence is important.

---

<div class="post-metadata">

**Author:** ![solidus1983](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/solidus1983/32/6181_2.png) [@solidus1983](https://forum.gl-inet.com/u/solidus1983)\
**Post date:** [June 11, 2023, 12:29pm UTC](https://forum.gl-inet.com/t/gl-inet-ax1800-openwrt-firmware/19447/251 "2023-06-11T12:29:45Z")

</div>

Right the image files:

- squashfs-nand-factory.ubi (Full image to flash via Uboot [http://192.168.1.1](http://192.168.1.1) )
- squashfs-nand-sysupgrade.bin (Flash via LUCI)
- initramfs-uImage.itb ( Run via TFTP Server using Uboot CMD commands)

So when you are going to flash my firmware you flash only the factory at [http://192.168.1.1](http://192.168.1.1) page

Only this file [uboot-ipq60xx/uboot-gl-ax1800-20220711-md5-9890c67c3dafa5aec172f3a31583f9a7.bin at master · gl-inet/uboot-ipq60xx · GitHub](https://github.com/gl-inet/uboot-ipq60xx/blob/master/uboot-gl-ax1800-20220711-md5-9890c67c3dafa5aec172f3a31583f9a7.bin) you flash via [http://192.168.1.1/uboot.html](http://192.168.1.1/uboot.html)

If you have flashed the factory image to the uboot.html page then your device is bricked bricked and can not be debricked.

Also Snapshots on my server are somewhat tested, however experimental folder is not and use at your own risk due to not being tested and a higher bricking risk.

---

<div class="post-metadata">

**Author:** ![vernie](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/v/0ea827/32.png) [@vernie](https://forum.gl-inet.com/u/vernie)\
**Post date:** [June 11, 2023, 12:38pm UTC](https://forum.gl-inet.com/t/gl-inet-ax1800-openwrt-firmware/19447/253 "2023-06-11T12:38:38Z")

</div>

I appreciate the details, thank you. I need another device to run this through.

---

<div class="post-metadata">

**Author:** ![fice](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/f/50afbb/32.png) [@fice](https://forum.gl-inet.com/u/fice)\
**Post date:** [June 24, 2023, 2:49am UTC](https://forum.gl-inet.com/t/gl-inet-ax1800-openwrt-firmware/19447/254 "2023-06-24T02:49:36Z")

</div>

I was getting ready to flash the firmware on the my AX1800 when I noticed the contradiction in the instructions. In the instructions above it states to flash only the factory at [http://192.168.1.1](http://192.168.1.1) page. Then on the download page I seen this note “IMPORTANT: Please Flash Factory Image via Uboot!.”

Am I understanding correct that the “Factory Image” is NOT the same as the “openwrt-ipq60xx-generic-glinet\_gl-ax1800-squashfs-nand-factory.ubi” file?

Bottom line is… Flash the openwrt-ipq60xx-generic-glinet\_gl-ax1800-squashfs-nand-factory.ubi file via the [http://192.168.1.1](http://192.168.1.1) page NOT [http://192.168.1.1/uboot.html](http://192.168.1.1/uboot.html) page. Correct?

---

<div class="post-metadata">

**Author:** ![misteryoso](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/m/b9bd4f/32.png) [@misteryoso](https://forum.gl-inet.com/u/misteryoso)\
**Post date:** [June 24, 2023, 2:05pm UTC](https://forum.gl-inet.com/t/gl-inet-ax1800-openwrt-firmware/19447/255 "2023-06-24T14:05:43Z")

</div>

To flash Solidus’ image, you will need to use the factory.ubi file, which should be flashed through [http://192.168.1.1](http://192.168.1.1).

In case you encounter issues, like I did, you should first flash the uboot itself through [http://192.168.1.1/uboot.html](http://192.168.1.1/uboot.html)

You can obtain the uboot file from this link: [uboot-ipq60xx/uboot-gl-ax1800-20220711-md5-9890c67c3dafa5aec172f3a31583f9a7.bin at master · gl-inet/uboot-ipq60xx · GitHub](https://github.com/gl-inet/uboot-ipq60xx/blob/master/uboot-gl-ax1800-20220711-md5-9890c67c3dafa5aec172f3a31583f9a7.bin).

EDIT: added uboot flasher webpage

---

<div class="post-metadata">

**Author:** ![solidus1983](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/solidus1983/32/6181_2.png) [@solidus1983](https://forum.gl-inet.com/u/solidus1983)\
**Post date:** [June 24, 2023, 3:29pm UTC](https://forum.gl-inet.com/t/gl-inet-ax1800-openwrt-firmware/19447/256 "2023-06-24T15:29:48Z")

</div>

Misteryoso you also forgot to mention when using that uboot file you should use [http://192.168.1.1/uboot.html](http://192.168.1.1/uboot.html)

But simply put

[http://192.168.1.1](http://192.168.1.1) (for factory.ubi)  
[http://192.168.1.1/uboot.html](http://192.168.1.1/uboot.html) (uboot-gl-ax.bin)

---

<div class="post-metadata">

**Author:** ![misteryoso](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/m/b9bd4f/32.png) [@misteryoso](https://forum.gl-inet.com/u/misteryoso)\
**Post date:** [June 25, 2023, 1:57am UTC](https://forum.gl-inet.com/t/gl-inet-ax1800-openwrt-firmware/19447/257 "2023-06-25T01:57:04Z")

</div>

You’re right, my bad. I’ve edited my reply. Ty

---

<div class="post-metadata">

**Author:** ![fice](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/f/50afbb/32.png) [@fice](https://forum.gl-inet.com/u/fice)\
**Post date:** [June 27, 2023, 2:31am UTC](https://forum.gl-inet.com/t/gl-inet-ax1800-openwrt-firmware/19447/258 "2023-06-27T02:31:38Z")

</div>

Am I understanding correctly that I will only need install “uboot-gl-ax.bin” using [http://192.168.1.1/uboot.html](http://192.168.1.1/uboot.html) if the install of “factory.ubi” goes sideways?

I really appreciate the responses!

---

<div class="post-metadata">

**Author:** ![y2kbug](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/y2kbug/32/8491_2.png) [@y2kbug](https://forum.gl-inet.com/u/y2kbug)\
**Post date:** [June 27, 2023, 6:21am UTC](https://forum.gl-inet.com/t/gl-inet-ax1800-openwrt-firmware/19447/259 "2023-06-27T06:21:12Z")

</div>

Sorry I am late to this thread. What is the difference between this firmware and the GL official one?

---

<div class="post-metadata">

**Author:** ![bring.fringe18](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bring.fringe18/32/11777_2.png) [@bring.fringe18](https://forum.gl-inet.com/u/bring.fringe18)\
**Post date:** [June 27, 2023, 8:21pm UTC](https://forum.gl-inet.com/t/gl-inet-ax1800-openwrt-firmware/19447/260 "2023-06-27T20:21:27Z")

</div>

@solidus1983

Hello Rogers,

Like @y2kbug & others, I’m terribly interested in your project.

I’m having a hard time keeping track of the various topics discussed within this massive thread. Have you considered setting up a presence on something like GitHub? I’d think it be easier to keep documentation, releases, faqs, inquiries/bug reports, etc. better sorted there.

For your consideration.

---

<div class="post-metadata">

**Author:** ![solidus1983](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/solidus1983/32/6181_2.png) [@solidus1983](https://forum.gl-inet.com/u/solidus1983)\
**Post date:** [June 27, 2023, 8:37pm UTC](https://forum.gl-inet.com/t/gl-inet-ax1800-openwrt-firmware/19447/261 "2023-06-27T20:37:57Z")

</div>

The project is in GitHub just look up my handle on here on github. Not sure how to setup what your talking up but willing to learn.

But to answer the question asked, my builds are openwrt builds and no qsdk builds.

---

<div class="post-metadata">

**Author:** ![bring.fringe18](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bring.fringe18/32/11777_2.png) [@bring.fringe18](https://forum.gl-inet.com/u/bring.fringe18)\
**Post date:** [June 27, 2023, 8:47pm UTC](https://forum.gl-inet.com/t/gl-inet-ax1800-openwrt-firmware/19447/262 "2023-06-27T20:47:49Z")

</div>

Oh, I see your github link under you ‘top posts’ but it 404’s. I found it: [solidus1983 (solidus1983) / Repositories · GitHub](https://github.com/solidus1983?tab=repositories)

I see 18 repos are there but ~~nothing specific to your AX-1800 distro.~~ found under [GitHub - solidus1983/gl-infra-builder](https://github.com/solidus1983/gl-infra-builder) . I suggest a cloning/renaming to something a little more distinctive (eg: _solidus-AX1800)_.

Does github not allow the hosting of the the released images instead of using something like Mega or Google Drive, etc?

My primary motivation for posting that comment was I personally find github’s ‘issues’ to be better suited for individual queries … never mind the ability to cleanly partition releases in the ‘releases’ section (and its changelog!).

(That all still ignores the ability to keep scripts protected from any catastrophes, of course.)

I’m currently trying to read it all but IMHO this thread has turned into a rather chaotic mess, a ‘dumping ground’ of sorts that makes it far too cumbersome to catch ‘the signal thru the noise.’

---

<div class="post-metadata">

**Author:** ![solidus1983](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/solidus1983/32/6181_2.png) [@solidus1983](https://forum.gl-inet.com/u/solidus1983)\
**Post date:** [June 27, 2023, 9:00pm UTC](https://forum.gl-inet.com/t/gl-inet-ax1800-openwrt-firmware/19447/263 "2023-06-27T21:00:22Z")

</div>

[solidus1983/openwrt at ipq60xx-devel (github.com)](https://github.com/solidus1983/openwrt/tree/ipq60xx-devel)

Is the repo i am talking about. The ipq6018 and ipq8074 was merged to qualcommax so all the stuff for the Slate AX and Flint are present in that repo.

I have at the same time removed the gl-intrabuilder too from my profile to make it easier to find the stuff that’s important.

---

<div class="post-metadata">

**Author:** ![bring.fringe18](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bring.fringe18/32/11777_2.png) [@bring.fringe18](https://forum.gl-inet.com/u/bring.fringe18)\
**Post date:** [June 27, 2023, 9:11pm UTC](https://forum.gl-inet.com/t/gl-inet-ax1800-openwrt-firmware/19447/264 "2023-06-27T21:11:28Z")

</div>

Yep; that’s just about what I’m talking about. There’s no way I would have made that association based solely on ARM architecture. I just caught up to the point where you mentioned you work on the AXT1800, too. I have one of them, too!

(… there’s so much going on in this thread…)

I’ll tell you a specifically selfish reason I also suggest a more fleshed out github for these distros: any github ‘release’ page can be converted into a RSS feed by appending _.atom_ on the end of _[github.com/projectName/releases](http://github.com/projectName/releases)_

One can do similarly to tracking individual ‘issues’ as well via [GitHub - RSS-Bridge/rss-bridge: The RSS feed for websites missing it](https://github.com/RSS-Bridge/rss-bridge)

I’d love to add a feed to my RSS reader to stay on top developments w/ your progress.

–  
[How to get the a releases RSS feed from a GitHub project](https://piraces.dev/short-bits/github-releases-feed-atom/)

---

<div class="post-metadata">

**Author:** ![bring.fringe18](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bring.fringe18/32/11777_2.png) [@bring.fringe18](https://forum.gl-inet.com/u/bring.fringe18)\
**Post date:** [June 27, 2023, 9:25pm UTC](https://forum.gl-inet.com/t/gl-inet-ax1800-openwrt-firmware/19447/265 "2023-06-27T21:25:24Z")

</div>

Re: R21362

> [@solidus1983](#):
>
> Whats not working:
> 
> - Fan\_control doesn’t start on boot known issue open ssh and execute `/etc/init.d/fan_control enable` then `/etc/init.d/fan_control start`

FYI: A ‘dirty workaround’ might be just to throw those commands into _/etc/rc.local_ until a proper fix is sorted.

---

<div class="post-metadata">

**Author:** ![solidus1983](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/solidus1983/32/6181_2.png) [@solidus1983](https://forum.gl-inet.com/u/solidus1983)\
**Post date:** [June 28, 2023, 1:54pm UTC](https://forum.gl-inet.com/t/gl-inet-ax1800-openwrt-firmware/19447/266 "2023-06-28T13:54:06Z")

</div>

Just a heads up everyone the next two days as of 22:00 GMT the server will be down due to electricity work.

[Previous page](https://forum.gl-inet.com/t/gl-inet-ax1800-openwrt-firmware/19447.md?page=12)

[Next page](https://forum.gl-inet.com/t/gl-inet-ax1800-openwrt-firmware/19447.md?page=14)
