GL-iNet AX1800 OpenWrt firmware

solidus1983 · 2024-09-22T08:51:26.015Z

uboot-ipq60xx/uboot-gl-ax1800-20220711-md5-9890c67c3dafa5aec172f3a31583f9a7.bin at master · gl-inet/uboot-ipq60xx · GitHub is the only one available.

Alex3 · 2024-12-13T13:26:16.545Z

Dear Solidus1983, thank for your effort to support AXT1800 owners, its a good piece of equipment which really needs new updates to survive.
I have installed your r26072 to run V2rayA with vless. The tunnel established without troubles, however the "tproxy" tranparent proxy option in setup returnes the following error. Other proxy options also do not route properly. I have same setup with Mango and Beryl, no such problems with them. Any idea how to solve?

failed to start v2ray-core: not support "tproxy" mode of transparent proxy: ExecCommands: iptables -w 2 -t mangle -A TP_OUT -p tcp -m addrtype --src-type LOCAL ! --dst-type LOCAL -j TP_RULE iptables v1.8.8 (nf_tables): Couldn't load match addrtype':No such file or directory Try iptables -h' or 'iptables --help' for more information. : exit status 2

jeva · 2024-12-23T12:52:37.372Z

Hej man, Merry christmas.

solidus1983 · 2024-12-23T13:04:57.872Z

Merry Christmas to you all as well

jeva · 2024-12-30T12:28:21.203Z

kern.alert kernel: [ 1.086584] mtdsplit: no squashfs found in "rootfs"
kern.warn kernel: [ 3.056687] gpio_button_hotplug: loading out-of-tree module taints kernel.
kern.warn kernel: [ 3.517486] __adpt_hppe_uniphy_psgmii_mode_set[1156]:INFO:uniphy 0 psgmii channel selection
kern.warn kernel: [ 3.642209] regi_init[3603]:INFO:Initializing HPPE Done!!
kern.warn kernel: [ 3.642337] regi_init[3662]:INFO:qca-ssdk module init succeeded!
kern.info kernel: [ 1.955535] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
kern.notice kernel: [ 2.677089] random: crng init done

Found few things, unsure if this is critical of can be left as is.

jeva · 2025-03-07T11:08:18.485Z

is it possible to have cups and relative packages for it from your repo?

meo · 2025-03-25T08:31:36.464Z

Great News!

The pull request adding AX1800/AXT1800 into main OpenWrt has just been merged and firmwares are available in snapshots:
https://downloads.openwrt.org/snapshots/targets/qualcommax/ipq60xx/

jeva · 2025-03-25T12:46:21.434Z

I feel stupid to ask, but how to do test this test image?

hecatae · 2025-03-25T13:04:48.497Z

OpenWrt snapshots lack a graphical user interface, so after flashing this you would need to install Luci via ssh

jeva · 2025-03-25T14:13:42.097Z

any quick walk through ?

VerZZX · 2025-03-25T15:22:22.711Z

https://firmware-selector.openwrt.org/?version=SNAPSHOT&target=qualcommax%2Fipq60xx&id=glinet_gl-ax1800

apk-mbedtls ath11k-firmware-ipq6018 base-files ca-bundle dnsmasq dropbear e2fsprogs firewall4 fstools kmod-ath11k-ahb kmod-fs-ext4 kmod-gpio-button-hotplug kmod-leds-gpio kmod-nft-offload kmod-qca-nss-dp kmod-usb-dwc3 kmod-usb-dwc3-qcom kmod-usb3 libc libgcc libustream-mbedtls logd losetup mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls ipq-wifi-glinet_gl-ax1800 luci

motox22a · 2025-03-25T18:40:01.694Z

I tried that Snapshot last night when I first saw it available...Tried several times installing...Wound up with a brick each time...Could not connect to it and could not SSH into it (Did not keep settings when flashing from gl.inet firmware)...Could not even ping it...You'll also notice you can't build a customized version yet on the Firmware Selector... I think it's still a work in progress...

jeva · 2025-03-25T19:17:10.605Z

kern.warn kernel: [ 2549.032607] ath11k c000000.wifi: invalid pdev id 1 in bss_chan_info event
kern.warn kernel: [ 2549.110453] ath11k c000000.wifi: bss channel survey timed out
kern.warn kernel: [ 2549.123871] ath11k c000000.wifi: invalid pdev id 2 in bss_chan_info event

how to fix this?

sfx2000 · 2025-03-26T00:42:27.256Z

Do not try to upgrade directly as a sysupgrade image from the GL-Inet software, even from luci over in advanced... Installing sysupgrade will likely result in a device that can't talk - it's not bricked however, uboot recovery can get things back up and running...

qualcommax: ipq60xx: add GL.iNet GL-AX1800/AXT1800 support
    
    Specifications:
      SoC:     Qualcomm IPQ6000
      RAM:     512 MiB
      Flash:   128 MiB NAND
      ETH:     Qualcomm QCA8075
      WLAN1:   2.4GHz 802.11b/g/n/ax 2x2
      WLAN2:   5GHz 802.11a/n/ac/ax 2x2
      Button:  Reset, Switch
      USB:     1x 3.0
      SD slot: 1 in GL-AXT1800
    
    Install via stock firmware:
      Upload factory.bin in stock firmware's upgrade page,
      do not preserve settings.
    
    Install via uboot web failsafe:
      Push the reset button for 5 seconds, then use broswer
      to access http://192.168.1.1, and upload factory.ubi.
    
    Afterwards upgrade can use sysupgrade image.

factory.ubi from u-boot recovery works fine for first flash over from gl-inet firmware.

motox22a · 2025-03-26T00:51:12.271Z

sfx2000,

Thanks...That's interesting because I can flash Snapshots from GL.inet Flint2 firmware without issue...If I flash factory.ubi from uboot on the Flint 1 can I get back to GL.inet Firmware (easily)??

sfx2000 · 2025-03-26T01:07:26.207Z

motox22a:

If I flash factory.ubi from uboot on the Flint 1 can I get back to GL.inet Firmware (easily)??

You'd have to ask the GL-Inet support folks - that being said, with the right image, you should be able to go back from u-boot recovery...

motox22a · 2025-03-26T01:10:21.648Z

sfx2000,

Thanks for the info...Did not realize that about the factory.bin and factory.ubi files...
I'm back on GL.inet firmware right now...Will try again later with factory.ubi.

sfx2000 · 2025-03-26T01:10:54.211Z

motox22a:

I think it's still a work in progress...

Snapshot/Master is always a work in progress - going there is a decision not taken lightly.

Just know that being now on the mainline in OpenWRT is a good thing - but for most folks, it's really early, and better off waiting a bit...

The stock firmware from GL-Inet is quite good - most are better off here for now.

motox22a · 2025-03-26T01:13:05.950Z

I've been on OpenWRT Snapshots on the Flint 2 since last year with very little trouble but that's been my only experience.

sfx2000 · 2025-03-26T01:19:56.967Z

MT6000 is a very different platform compared to the AX/AXT1800's...

Nice to see at the moment as we can have an apples/apples compare between MediaTek and Qualcomm - MT6000 has an advantage with the 4*4:4 radios and more clocks, but Qualcomm's radios are generally better, IMHO...

Anyways - it'll be interesting to see how things go - I've got a Flint2 on hand, and a SlateAX as well - and a Flint(1) on order...