# GL.iNET Flint 2 (GL-MT6000) VLAN Setup

**URL:** <https://forum.gl-inet.com/t/gl-inet-flint-2-gl-mt6000-vlan-setup/49100>\
**Category:** Router\
**Created:** [October 15, 2024, 5:35am UTC](https://forum.gl-inet.com/t/gl-inet-flint-2-gl-mt6000-vlan-setup/49100 "2024-10-15T05:35:48Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![xize11](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/xize11/32/5340_2.png) [@xize11](https://forum.gl-inet.com/u/xize11)\
**Post date:** [October 15, 2024, 6:13am UTC](https://forum.gl-inet.com/t/gl-inet-flint-2-gl-mt6000-vlan-setup/49100/6 "2024-10-15T06:13:31Z")

</div>

Ah, well it should be fine for now, but alot of unmanaged switches can strip vlan tags this is something to be aware off when you plan to expand your network further in the future and when you want more vlans involved over the switch.

In that case maybe vlans are not needed yet, you can maybe also go for a routed port.

> [@Help a noob to setup subnets](https://forum.gl-inet.com/t/help-a-noob-to-setup-subnets/48691/4):
>
> hey welcome slightly_smiling_face for isolated networks sure this is possible wink vlans are not needed we can just do something which is called a routed ap to make it as easy as it gets, there is also a CLI tutorial on openwrt [here](https://openwrt.org/docs/guide-user/network/wifi/routedap), though i gonna show it in luci since CLI looks much more advanced and itimidated for first users. first lets start with the basic network first and later i'll explain ways to isolate, this highly depends in which way you want the isolation to work. first le…

Maybe this can also work?

In that case the only change you need to make for the port assignment is:

go to luci -\> network -\> interfaces and click on the tab devices.

edit br-lan, and then remove the port you want to be used where the switch is connected on.

then follow the link i sent and where the interface is created make sure the interface has the device selected of the port you previously removed from br-lan.

---

_[View the full topic](https://forum.gl-inet.com/t/gl-inet-flint-2-gl-mt6000-vlan-setup/49100)._