# GL.iNet GL-A1300 (slate Pluste) tailscale exit node

**URL:** <https://forum.gl-inet.com/t/gl-inet-gl-a1300-slate-pluste-tailscale-exit-node/45866>\
**Category:** Router\
**Created:** [August 13, 2024, 1:56pm UTC](https://forum.gl-inet.com/t/gl-inet-gl-a1300-slate-pluste-tailscale-exit-node/45866 "2024-08-13T13:56:48Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![bruce](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bruce/32/35649_2.png) [@bruce](https://forum.gl-inet.com/u/bruce)\
**Post date:** [August 16, 2024, 2:44am UTC](https://forum.gl-inet.com/t/gl-inet-gl-a1300-slate-pluste-tailscale-exit-node/45866/7 "2024-08-16T02:44:53Z")

</div>

Refer to this post to set up as exit node:

> [@Tailscale settings lost on reboot](https://forum.gl-inet.com/t/tailscale-settings-lost-on-reboot/31524/19):
>
> Yeah I see that now after you posted that dir list. The more I look at this the more it seems all so familar: This is untested code to enable exit nodes I never got feedback on from someone else but here: sed '/param="$param --exit-node-allow-lan-access --exit-node=$exit\_node\_ip"/a\ param=“$param --advertise-exit-node --allow-exit-node --allow-routes”' /usr/bin/gl\_tailscale \>\> \ /usr/bin/gl\_tailscale.new && mv /usr/bin/gl\_tailscale /usr/bin/gl\_tailscale.stock \ && mv /u…

---

_[View the full topic](https://forum.gl-inet.com/t/gl-inet-gl-a1300-slate-pluste-tailscale-exit-node/45866)._