# GL.INET MT-6000 (FLINT 2) - Disabling ieee 802.3 flow control (pause frames) per port

**URL:** <https://forum.gl-inet.com/t/gl-inet-mt-6000-flint-2-disabling-ieee-802-3-flow-control-pause-frames-per-port/72852>\
**Category:** Router\
**Created:** [November 12, 2026, 5:17pm UTC](https://forum.gl-inet.com/t/gl-inet-mt-6000-flint-2-disabling-ieee-802-3-flow-control-pause-frames-per-port/72852 "2026-11-12T17:17:50Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![rome](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/r/ecae2f/32.png) [@rome](https://forum.gl-inet.com/u/rome)\
**Post date:** [November 12, 2026, 5:17pm UTC](https://forum.gl-inet.com/t/gl-inet-mt-6000-flint-2-disabling-ieee-802-3-flow-control-pause-frames-per-port/72852/1 "2026-11-12T17:17:50Z")

</div>

Hello everyone,

Fairly new to the GL.inet router scene and so far I have been enjoying it as an all in one router with WiFi. Previously I was on a device that acted as a router with openwrt but didn’t have WiFi capabilities. Making the switch to the flint series was an ideal decision for my home setup. Now I am semi experienced with openwrt and how to navigate through settings and modify them. For my flint 2 however, I want to know if there’s any way for me to disable flow control or some call it pause frames for each port. I do have my pc connected to the wan/lan port which I believe is LAN1 and so forth it is connected to ETH0. I believe I can disable flow control for the WAN only port but I can’t seem to find anywhere on how to disable it for the other ports. If there is a way I would love to know. If not, I would love there to be an accessible and adjustable setting for this. Especially for the FLINT 2. Thank you