# GL-Inet Plex Remote Access

**URL:** <https://forum.gl-inet.com/t/gl-inet-plex-remote-access/42310>\
**Category:** Router\
**Created:** [May 15, 2024, 2:11pm UTC](https://forum.gl-inet.com/t/gl-inet-plex-remote-access/42310 "2024-05-15T14:11:14Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![PJD1984](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/p/7bcc69/32.png) [@PJD1984](https://forum.gl-inet.com/u/PJD1984)\
**Post date:** [May 15, 2024, 2:11pm UTC](https://forum.gl-inet.com/t/gl-inet-plex-remote-access/42310/1 "2024-05-15T14:11:14Z")

</div>

I am trying to set up port forwarding on a GL-Inet Spitz Ax3000 for remote access to Plex server  
I have done this before on an Asus Router and it is working fine on that server but not having much joy with this one

I have followed the same steps  
Protocol TCP  
External Zone: Wan  
External Port [Port Specified in Plex]  
Internal Zone: Lan [Internal IP address of nas]  
Internal port 32400

Protocol TCP  
External Zone Wan  
External Port [Port specified in plex]  
Internal Zone Lan  
Internal IP [Public IP in Plex]  
Internal Port 32400

Im not super clued up about port forwarding so I am making a mistake somewhere, every time I access the Plex on the NAS remotely it converts to 2 MB so its going through the relay

Would appreciate any help

---

<div class="post-metadata">

**Author:** ![admon](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/admon/32/32880_2.png) [@admon](https://forum.gl-inet.com/u/admon)\
**Post date:** [May 15, 2024, 2:36pm UTC](https://forum.gl-inet.com/t/gl-inet-plex-remote-access/42310/2 "2024-05-15T14:36:08Z")

</div>

TCP

- Name: Plex
- Protocol: TCP
- External Zone: WAN
- External Port: 32400
- Internal Zone: LAN
- Internal IP: Local Plex Server IP (so 192.168.8.xxx for example)
- Internal Port: 32400
- Enable: Yes

Please keep in mind that this won’t work on cellular network.

---

<div class="post-metadata">

**Author:** ![PJD1984](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/p/7bcc69/32.png) [@PJD1984](https://forum.gl-inet.com/u/PJD1984)\
**Post date:** [May 15, 2024, 2:42pm UTC](https://forum.gl-inet.com/t/gl-inet-plex-remote-access/42310/3 "2024-05-15T14:42:32Z")

</div>

Hello thanks for the reply why will this not work on Cellular ?

---

<div class="post-metadata">

**Author:** ![admon](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/admon/32/32880_2.png) [@admon](https://forum.gl-inet.com/u/admon)\
**Post date:** [May 15, 2024, 2:52pm UTC](https://forum.gl-inet.com/t/gl-inet-plex-remote-access/42310/4 "2024-05-15T14:52:53Z")

</div>

Because of [Carrier-grade NAT - Wikipedia](https://en.wikipedia.org/wiki/Carrier-grade_NAT) which will make it impossible to open ports.

---

<div class="post-metadata">

**Author:** ![PJD1984](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/p/7bcc69/32.png) [@PJD1984](https://forum.gl-inet.com/u/PJD1984)\
**Post date:** [May 15, 2024, 2:58pm UTC](https://forum.gl-inet.com/t/gl-inet-plex-remote-access/42310/5 "2024-05-15T14:58:03Z")

</div>

Oh damn that goes that then

---

<div class="post-metadata">

**Author:** ![rsday75](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/r/e95f7d/32.png) [@rsday75](https://forum.gl-inet.com/u/rsday75)\
**Post date:** [May 15, 2024, 3:57pm UTC](https://forum.gl-inet.com/t/gl-inet-plex-remote-access/42310/6 "2024-05-15T15:57:39Z")

</div>

Look into TailScale.  
I use it to get access to my Plex server everywhere even with CGNAT.  
Easy to setup. I use my AppleTV as an exit node since it is on all the time.

---

<div class="post-metadata">

**Author:** ![bruce](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bruce/32/35649_2.png) [@bruce](https://forum.gl-inet.com/u/bruce)\
**Post date:** [October 29, 2025, 11:38am UTC](https://forum.gl-inet.com/t/gl-inet-plex-remote-access/42310/7 "2025-10-29T11:38:56Z")

</div>


