GL-MiFi headers pins and layout

ekawahyu · 2016-11-10T16:38:56.000Z

Where can I find the mechanical drawing of GL-MiFi board, especially the position of header pins with respect to board dimension? I would like to make an extension board for it.

BTW, is there any plan to increase the amount of flash from 16MB to 32MB? If not, is there a way to customize it myself like replacing the flash and what would be the part number? Thank you.

alzhao · 2016-11-14T14:22:35.000Z

First the chip only support up to 16MB flash. But you can use the mircroSD card and use extroot https://wiki.openwrt.org/doc/howto/extroot

It is not too difficult to set up.

We will generate the dimension of the board and send it to you.

alex_zheng · 2016-11-14T22:13:43.000Z

Hi ekawahyu,please see the attachment.please confirm if it can fit your needs?

ekawahyu · 2016-11-15T00:03:09.000Z

Yes, that is helpful, but missing two details in there (please see attachment). I also need the pin number and assignment please. Thank you.

alzhao · 2016-11-15T11:27:20.000Z

The pin number assignment is here: https://www.gl-inet.com/hk/products/gl-mifi/

alex_zheng · 2016-11-18T14:18:29.000Z

Sorry,i forget to reply you .they both are 1.27mm.