1

Dear support,

Been using the Beryl GL-MT1300 as Wifi/fixed router (wireguard client) since July 2022 without issues.

Last week it got stock after a config change, and I (accidentally) performed a factory reset. Then I restored the config from a backup file, and it seems to work as expected again.

But what I noticed is that the led light stays solid blue now, (after being booted up), but networking/the router seems to function normally.

In the documentation I saw:

  • Solid blue light: Device is powering up.
  • Solid white light: Network is connected.

I also remember that the light was normally solid white before when booted up.

Could you please point me to where to look on the router to troubleshoot this “issue”/ or what info to provide?

P.s. I saw a forum item about power supply issues, but I tried another 3A power supply and the light also stays solid blue when networking seems to work normally.

Thanks in advance, kind regards, Guido

2

Can you post what is the firmware version? 3.215 or 4.x?

The LED should be white.

3

Hi,

Thank you for the quick reply!

===================

Current Version

3.215

Compile Time

2022-09-21 11:49:49

Last Update

3.215

===================

Please let me know what I can check in the CLI/shell.

Regards, Guido

4

Please try the command to turn on the led:

/etc/init.d/led enable
/etc/init.d/led restart

then， check to see if gl_mt1300_led_daemon is already running

root@GL-MT1300:/# ps | grep led
21981 root      1232 S    grep led
22841 root      1240 S    /bin/sh /usr/bin/gl_mt1300_led_daemon
5

root@iPhone:~#
root@iPhone:~# # right after bootup: router seems to work

root@iPhone:~# ps | grep -i led
28674 root 1232 S grep -i led

root@iPhone:~# /etc/init.d/led enable
root@iPhone:~# /etc/init.d/led start

root@iPhone:~# ps | grep -i led
30690 root 1232 S grep -i led

what I also notice is that the light doesn’t turn off anymore by:

root@iPhone:~# /etc/init.d/led stop

But I guess this is because the led service does not seem to start anymore?

“led status” does not seem to be a thing for this service, any other way/place to find errors for this?

p.s. yes, hostname is “iPhone” :wink:

6

copy the led program from rom, then execute it again

cp /rom/usr/bin/mt1300_led /usr/bin/
cp /rom/usr/bin/gl_mt1300_led_daemon  /usr/bin/
cp /rom/etc/init.d/led  /etc/init.d/
/etc/init.d/led enable
/etc/init.d/led restart
7

Great, that fixed it, thank you!