Gl-mt3000 v4.1.2 beta : quectel eg25-g with external USB enclosure

lizh · 2023-08-26T09:41:41.910Z

Hi jddebug:

If modified to echo “Y” > /sys/class/net/$ifname/qmi/raw_ip, Whether it works properly?

bOcy · 2023-08-26T09:59:20.745Z

Please note I did update my quectel modem firmware with glinet help, if your modem hasn’t update for a few years, maybe you need to update it

jddebug · 2023-08-26T13:25:28.824Z

Yes, when I made that modification on the previous firmware it fixed everything and I was able to connect. I can not find correct change to fix the newest firmware so I can’t connect.

jddebug · 2023-08-26T13:26:16.766Z

I’d like to try that. Did they send you instructions or did they do it for you? Mine is the EG25-G.

bOcy · 2023-08-26T16:09:01.634Z

Fired up my mt3000 that has 4.4.5 days ago, yeap external modem eg-25g can’t establish connection, going back to 4.2.3

bOcy · 2023-08-26T16:11:10.170Z

Gl-mt3000 v4.1.2 beta : quectel eg25-g with external USB enclosure Technical Support for Routers

You can use this command （gl_modem -B 1-1 AT AT+QGMR）to check the firmware version of the modem [image]

Check earlier in the post, it’s a process of checking your modem serial and giving to them so that they can ‘make’ the firmware for you

jddebug · 2023-08-26T16:35:28.683Z

Gl-mt3000 v4.1.2 beta : quectel eg25-g with external USB enclosure:

gl_modem -B 1-1 AT AT+QGMR

I got this:

AT+QGMR

EG25GGBR07A08M2G_01.001.01.001

lizh · 2023-08-28T02:02:15.521Z

I will check it. It may take some time.

bOcy · 2023-08-29T04:05:02.288Z

image781×494 12.5 KB

for 4.4.5 i modified here, then initially the router couldnt detect the modem even after one reboot

i switched to another usb modem that uses tethering then switch back to the external modem it then able to establish data connection (and set ttl works)

how long it can stay online, will monitor

update modem not so stable in this firmware, it goes offline randomly and becomes undetected by mt3000, maybe theres more configuration required but its out of my capability

jddebug · 2023-08-29T15:20:25.062Z

Thanks for the reply and taking a stab at it. This is difficult not having my cell modem anymore. Is disappointing they removed signal strength info and set the default USB port to USB0 with this firmware so making AT commands is a pain. Have to select USB3 every time you issue a command and can’t easily set your antenna due to no cell signal strength info.

jddebug · 2023-09-12T01:13:09.018Z

GL-iNET. Can you help us out with this? The previous firmware we were able to get things working after editing the qmi.sh file but now that file has very different content and we can’t use our modems anymore.

lizh · 2023-09-13T11:04:14.875Z

jddebug:

Have to select USB3 every time you issue a command and can’t easily set your antenna due to no cell signal strength info.

This issue will be corrected as soon as possible.

There are some issues with the qmi driver, which are being debug.

cielke · 2023-11-21T18:15:32.530Z

hi guys,
is anything going on in this topic?

I have Beryl AX (MT-3000) + GL M2 with T77W968 / DW5821e in it. When I plug the board to the router nothing shows up in Cellular nor Tethering.
Tried on firmware 4.2.3 and 4.4.6 - same result.

—Update
I can see it’s usb-modeswitch related - move the discussion here

lizh · 2023-11-22T01:33:57.685Z

T77W968 / DW5821e is not supported yet.

ntkhai · 2023-11-28T04:53:50.328Z

can you find solution for this

ntkhai · 2023-11-28T04:56:36.331Z

so how can i connect MT3000 with DW5821e, sir?

cielke · 2023-11-28T05:41:09.970Z

I think that with stock firmware it is not possible. I flashed pure OpenWRT v23 but still no luck. The modem is visible in mmcli but SIM card will not register.
I followed this tutorial. Apparently prepering the modem is also necessary see this but I don’t want to do it.
It’s already my second modem that I can not connect. I sold L-860 because it didn’t work with stock firmware. I though I will have more luck with DW5821e but it doesn’t look like this.
A couple days ago I bought another L-860 (in shipping) and going to sell DW5821e. Hope it will connect via OpenWRT v23.

ntkhai · 2023-11-28T06:55:52.600Z

yeah, i try two ways of tutorial, then result is:

mmcli-L.jpeg1443×455 14.2 KB

root@GL-MT3000:~# mmcli -L
/org/freedesktop/ModemManager1/Modem/0 [manufacturer unknown] model unknown

cielke · 2023-11-28T10:01:51.636Z

It was exactly same for me.
Try flashing pure OpenWRT v23 and downgrade ModemManager.

dunsky · 2024-08-17T14:59:45.298Z

You need to remove scripts from /etc/hotplug.d/usb and then cdc-wdm0 device will show up so you can add an interface for MBIM or QMI (if your modem is in QMI) connection without using Modem Manager