GL-MT300N-V2 Auto Update IP crontab scrip help

Momed · 2018-06-21T19:36:53.186Z

Hello I need help with scrip to Scheduled Tasks to Auto Update my IP using a crontab to visit my API url on a regular basis to ensure that the IP in my DNS provider account is always up to date.

I have been given instructions with script on How to set up a Cronjob on DD-WRT . But my router is GL-MT300N-V2 , running OPENWRT .

I don’t know if I can use the scrip of DD-WRT on the link below to input on my OPENWRT, is is going to work . Please help with script.

Here instructions on link I received

https://support.unlocator.com/article/151-how-to-set-up-a-cronjob-on-dd-wrt-to-auto-update-your-ip

Johnex · 2018-06-21T22:46:50.303Z

Similar but do this instead to enable cron and setup the task:

Medium – 11 May 16

LEDE/OpenWRT — Scheduling Tasks

Automating certain tasks on your LEDE/OpenWRT device can help keep things running smoothly.

Reading time: 2 min read

Momed · 2018-06-22T04:42:46.282Z

Thank you The putty instructions are straight forward,. Do you know how to write the scrip command to connect to API url at given times?

glitch · 2018-06-22T07:26:26.043Z

Momed:

Do you know how to write the scrip command to connect to API url at given times?

The link you gave in your OP tells you how to do that.

G

Johnex · 2018-06-22T11:11:58.790Z

Yup just pick one of the lines from your link, and add them into the crontab -e from my link.

Momed · 2018-06-22T11:26:16.807Z

I see that but I was concerned that the command for DD-WRT router is different from OpenWrt.

Should that command on the link be correct then?

Johnex · 2018-06-22T11:39:47.863Z

Yup. Cron is a linux thing so it’s universal for all these firmware’s and normal linux as well.

alzhao · 2018-06-23T07:23:49.108Z

I suppose that you have solved your problem using email support.

Momed · 2018-07-02T18:46:38.629Z

Hi

I have finally resolved my probem with small changes to the command.

wget http://xxx.it/123456678899 --no-check-certificate -O -

Added no --no-check-certificate -O - also installed wget I’m not sure if it was there before . However API updates.

Thank you

abukabhs · 2019-06-26T05:45:33.218Z

Hello
I just purchased a second GL-AR300M .
I am trying wget to refresh a url which will update my IP with the smart DNS provider.
However, it is not doing it.
The first one is somehow doing it.
Should I upgrade the firmware for it to work?
Thanks

alzhao · 2019-06-26T05:59:19.509Z

I don’t think there is anything different, as it is just wget

What is output of wget?

abukabhs · 2019-06-26T11:51:23.740Z

I have no ouput…
I tried the following methods with no success:
*/05 * * * * wget -q --spider http://www.globalapi.net/sdp/api/IP/update/644dc16ad68xxxx

wget http://www.globalapi.net/sdp/api/IP/update/644dc16ad68xxxx --no-check-certificate -O -

wget -q “http://www.globalapi.net/sdp/api/IP/update/644dc16ad68xxxx” -O /dev/null

wget http://www.globalapi.net/sdp/api/IP/update/644dc16ad68xxxx

Thanks