GL-MT300N-V2 - client issue

While setting up as wireless client:

/usr/lib/lua/luci/dispatcher.lua:460: Failed to execute arcombine dispatcher target for entry ‘/admin/network/wireless/mt7628.network1’.
The called action terminated with an exception:
/usr/lib/lua/luci/i18n.lua:42: bad argument #1 to ‘format’ (integer expected, got nil)
stack traceback:
[C]: in function ‘assert’
/usr/lib/lua/luci/dispatcher.lua:460: in function ‘dispatch’
/usr/lib/lua/luci/dispatcher.lua:141: in function </usr/lib/lua/luci/dispatcher.lua:140>

Why you use luci to set up wireless client. It does not support luci wireless config because it uses MTK wifi driver, not open source.

You can configure the router in GL.iNet UI as extender. Then disable wifi broadcast. So it is client mode.

I don’t - it bombed out and what I pasted is what I got…

Also - from serial:

[ 405.037694] /data6/lede-1701-mt300nv2/build_dir/target-mipsel_24kc_musl-1.1.16/linux-ramips_mt7628/mt7628-4.0.1.3/build//…/src/embedded/common/scan.c:83 assert (ch != 0)failed
[ 405.053729] CmdChannelSwitch: central channel = 0 is invalid
[ 405.059482] /data6/lede-1701-mt300nv2/build_dir/target-mipsel_24kc_musl-1.1.16/linux-ramips_mt7628/mt7628-4.0.1.3/build//…/src/embedded/common/scan.c:128 assert (ch != 0)failed
[ 405.075530] CmdChannelSwitch: central channel = 0 is invalid

Using Domino to set up as repeater, not LUCI

Changing wireless password for “PORTAL” :slight_smile:

/usr/lib/lua/luci/dispatcher.lua:460: Failed to execute call dispatcher target for entry ‘/webpanel/network’.
The called action terminated with an exception:
/usr/lib/lua/luci/controller/domino/index.lua:975: bad argument #4 to ‘set’ (string expected, got nil)
stack traceback:
[C]: in function ‘assert’
/usr/lib/lua/luci/dispatcher.lua:460: in function ‘dispatch’
/usr/lib/lua/luci/dispatcher.lua:141: in function </usr/lib/lua/luci/dispatcher.lua:140>

And no - I was still using Domino.

Are you realling use MT300N-v2?

It has nothing to do with Domino. Different ages.

Yup.
Want a picture of it?