[GL-MT300N-V2] openVPN setup

[Johnex]

Hi @psigli

The issue is with the DNS not updating correctly. Try doing this:

AR750 as OpenVPN client, no DNS for far network

Here is a copy and paste solution, just change the name of your client config file, paste into the ssh connection and it will do the rest: cat<<'EOF' >> /etc/openvpn/<YOUR_CLIENT_FILE_NAME>.ovpn script-security 2 up /etc/openvpn/updns down /etc/openvpn/downdns EOF cat<<'EOF' > /etc/openvpn/updns #!/bin/sh mv /tmp/resolv.conf.auto /tmp/resolv.conf.auto.hold echo $foreign_option_1 | sed -e 's/dhcp-option DOMAIN/domain/g' -e 's/dhcp-option DNS/nameserver/g' > /tmp/resolv.conf.auto echo $foreign_o…

You will need to connect to your router with SSH, that is quite easy. You can use a free program called putty, just set it to the new ip you set in the other thread ;). Log in as root with the same password as the admin pages and then paste those commands from the other thread, replacing the filename of your config; its the same name as when you uploaded. Press enter in the SSH after the last command.

The benefit of the scripts i linked is that you always get the latest DNS, and avoid leaks. You could also just set the DNS from NordVPN in the GL-iNet interface but i don’t recommend that.