# \[GL-MT300N-V2\] port forwarding and ssh

**URL:** <https://forum.gl-inet.com/t/gl-mt300n-v2-port-forwarding-and-ssh/3842>\
**Category:** Router\
**Created:** [June 17, 2018, 3:45pm UTC](https://forum.gl-inet.com/t/gl-mt300n-v2-port-forwarding-and-ssh/3842 "2018-06-17T15:45:16Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![psigli](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/p/77aa72/32.png) [@psigli](https://forum.gl-inet.com/u/psigli)\
**Post date:** [June 17, 2018, 5:24pm UTC](https://forum.gl-inet.com/t/gl-mt300n-v2-port-forwarding-and-ssh/3842/3 "2018-06-17T17:24:34Z")

</div>

> [@Johnex](#):
>
> You need to do that again from Luci.  
> From the GL-iNet Interface click “Advanced settings \>\>” in the top right.  
> Login, then go to:
> 
> Network → Firewall  
> Port Forwards submenu  
> Use external zone wan.  
> Do what you need there 😃  
> **That’s exactly where I get lost 🙂**
> 
> You can have port 22 and port 23 for example, you can use any port you like, but i would use some much higher ports, say 2080, 2090 or something like that not taken by usual services and not always scanned for on the external ports, and ofc to port 22 internally.  
> **That’s right, infact I was planning to use ports 60021, 60022**
> 
> One port forward for each pc.  
> **Got it**
> 
> You might also want to reserve the IP those pc’s so they don’t change on you suddenly.  
> **Already done that**
> 
> Network → DHCP & DNS  
> Static Leases at the bottom.

Replied in the quote.

So that’s my firewall page configuration:

 ![01](https://forum-static.gl-inet.com/original/1X/33c41639f610529dd8ae9d6efd3b8838feed1bd2.jpeg)

And the port forwarding configuration for PC01:

 ![02](https://forum-static.gl-inet.com/original/1X/26315abf526196bb88df201208f636028c6c633a.jpeg)

Is it everything ok?

---

_[View the full topic](https://forum.gl-inet.com/t/gl-mt300n-v2-port-forwarding-and-ssh/3842)._