GL-MT300N v2 Tor and Wisp issues

hector · 2018-04-14T01:03:17.885Z

I agree with you wholeheartedly.

We’re running into the same EXACT issues so others must be affected by this as well.

The only difference between our issues is I seem to have gone a step past bricking the router. I honestly have no idea what’s wrong with it and I’ve followed all the instructions very carefully.

I have another GL router arriving tomorrow. The blue one. I have a good feeling that it’ll go much smoother.

alzhao · 2018-04-14T08:05:53.554Z

Don’t keep settings when shift between different firmware.

I will test the tor firmware for v2 next week.

jesterking · 2018-04-14T12:26:44.685Z

I’ve tried it both ways numberous times. The only way i can get for firmware working in wisp mode is to retain the settings.

Regardless, even when I do a clean install and plug the wan directly into my modem, tor doesn’t work. Some guides say there should be two ssid’s, but i only see one, “portal”, and plugging into the lan doesn’t work either.

Tor says it’s connected but nothing gets routed…

Thanks for your help alzhao

Edit: if i go into luci and scan for ssid’s it does find them. I get an error when trying to connect. I don’t have it here but give me a little bit and i will post the error.

jesterking · 2018-04-16T13:11:54.520Z

Instead of flashing to the LEDE firmware… Why not just make a custom GL.iNet firmware, with the option of a TOR vpn? that would make things much easier…

alzhao · 2018-04-16T15:37:29.758Z

I fixed some bugs today but still need to fix several other.

The reason we have a customized firmware is that we want to make it fully open source.

jesterking · 2018-04-17T14:00:50.994Z

Thanks Alzhao, can you explain what fixes you’ve made and need to make? Just curious…

Also, I appreciate the opensource aspect of it, but sometime people want simplicity. If TOR was a part of the official GL.iNet, I think it would be a good seller. Just my opinion.

Thanks for your help!

alzhao · 2018-04-19T11:58:01.258Z

I did some work but had no time to do more. It is mainly because of the WiFi driver difference

jesterking · 2018-04-24T13:40:46.297Z

Hi Alzhao, how are you making out with the fixes? haven’t heard anything in about a week. Thanks.

alzhao · 2018-04-26T08:54:07.727Z

Not too much progress. I bookmarked and will find time to do this asap.

jesterking · 2018-04-26T13:17:55.396Z

I appreciate your efforts

jesterking · 2018-04-30T16:11:01.231Z

Happy Monday, hope you had a great weekend. Just checking in… I purchased this about a month ago and still have yet to use it as intended due to lack of TOR functionality…

Thanks again!

alzhao · 2018-04-30T16:19:02.628Z

My sincere apologies. I will report back on Wednesday.

jesterking · 2018-04-30T16:22:42.938Z

Thanks, I really don’t mean to be a pain. You seem to be the only person working the engineering section of GL.iNet! That means you are a busy person, and I do appreciate your time and efforts!

alzhao · 2018-05-01T04:25:30.169Z

Not really. I made the tor firmware so I have to fix it.

We have a bunch of engineers all of them are busy with something.

jesterking · 2018-05-01T13:11:37.403Z

I’m sure… I was just being a bit sarcastic, since I see you responding quite a bit! Thanks!

alzhao · 2018-05-02T11:55:23.732Z

Did some work today. Not finished. Continue tomorrow

jesterking · 2018-05-03T00:32:32.340Z

you-can-do-it-meme-4-1

alzhao · 2018-05-03T05:01:15.073Z

Finally, pls check GL.iNet download center and find v2.2641

You can flash this firmware directly from your old UI.

After setting up repeater, if Tor cannot connect, you may need to restart the router.

Also updated files in github.

jesterking · 2018-05-03T13:44:12.822Z

Looks to be working! WISP and TOR without any real difficult configurations needed on the users end! I will continue to play with it and report back any issues that I may find! Curious, what changes were needed that you made to get it working properly?

Thanks for all your help!

MXuFUjA813×1014 108 KB

alzhao · 2018-05-03T14:01:55.556Z

You can check on github of the source code. A lot of work.

If you move switch back it should be simply go back to TOR without quitting network. I don’t think the reset switch will reset tor.