[GL-MT6000] Bricked - GPT Corruption - Requesting Recovery File

Router
1

New Flint 2
Attempted to upgrade to v 4.9.0 firmware via uboot after downloading the correct file for Flint 2 from GL-iNet
Uboot said upgrade was successful but on reboot the router just remained in a blinking blue LED status, waited 30 minutes no change

Since this status remained, I repeated process to enter UBoot mode, which seemed successful but same scenario occurred. Note that the blue LED only flashed 4 time before led turned to white but still able to accerss UBOOT at 192.168.1.1

Since I still have access to UBoot:
Request link to a recovery file

thank you

2

Did you make sure NOT to use LAN port 1? If you were using LAN1 swap to one of the other gigabit LAN ports and it should work.

1 Like
3

Yes, corrected scenario. All seems good now. My ignorance (and probably need new glasses :wink: ), I apologize. Also needed to change subnet on new flint once connected. All good. WiFi working, ethernet working.

My additioanl confusion: upgraded different flint 2 but used the web ui, so on reboot, the led was indeed solid white. So when the new flint was just sitting at blinking blue…..well, confusion sets in.

Again, my aplogies

3 Likes