# GL-MV1000 (Brume) Tailscale 1.56.1

**URL:** <https://forum.gl-inet.com/t/gl-mv1000-brume-tailscale-1-56-1/36585>\
**Category:** VPN, DNS, Leaks\
**Created:** [December 28, 2023, 8:27pm UTC](https://forum.gl-inet.com/t/gl-mv1000-brume-tailscale-1-56-1/36585 "2023-12-28T20:27:28Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![amb1s1](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/a/fbc32d/32.png) [@amb1s1](https://forum.gl-inet.com/u/amb1s1)\
**Post date:** [December 28, 2023, 8:27pm UTC](https://forum.gl-inet.com/t/gl-mv1000-brume-tailscale-1-56-1/36585/1 "2023-12-28T20:27:28Z")

</div>

I have just upgraded both Original Brume and Brume 2 to version 1.56.1. Brume 2 is functioning properly and serving as an exit node. I can confirm this by using my iPhone. However, when I attempt to use Brume 2 as the exit node on my Brume device, it continues to send traffic to the WAN instead of the tailscale0 interface.

Any troubleshooting?

---

<div class="post-metadata">

**Author:** ![bruce](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bruce/32/35649_2.png) [@bruce](https://forum.gl-inet.com/u/bruce)\
**Post date:** [October 29, 2025, 4:28am UTC](https://forum.gl-inet.com/t/gl-mv1000-brume-tailscale-1-56-1/36585/2 "2025-10-29T04:28:46Z")

</div>