# GL-RM10 no local web access **URL:** \ **Category:** KVM\ **Created:** [March 19, 2026, 7:35pm UTC](https://forum.gl-inet.com/t/gl-rm10-no-local-web-access/67721 "2026-03-19T19:35:03Z")\ **Posts on this page:** 13\ **Page:** 1
**Author:** ![WBIII](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/wbiii/32/32903_2.png) [@WBIII](https://forum.gl-inet.com/u/WBIII)\ **Post date:** [March 19, 2026, 7:35pm UTC](https://forum.gl-inet.com/t/gl-rm10-no-local-web-access/67721/1 "2026-03-19T19:35:03Z")
I just fired up a new GL-RM10 (Comet Pro) and I cannot access it via the local web browser. I am using its IP. Neither HTTP or HTTPS work. The Windows Application and the cloud remote control work but it does not respond locally. If it matters its hooked up via WiFi. Its on the newest firmware. I also factory reset it once with no change. Any suggestions? ---
**Author:** ![jdbower](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/jdbower/32/27881_2.png) [@jdbower](https://forum.gl-inet.com/u/jdbower)\ **Post date:** [March 19, 2026, 7:38pm UTC](https://forum.gl-inet.com/t/gl-rm10-no-local-web-access/67721/2 "2026-03-19T19:38:16Z")
A lot of routers will disable peer-to-peer communication by default, could that be your case here? The goal of the setting is to protect your network if an IoT device goes rogue, but it does interfere if both the Comet and your laptop are on WiFi. ---
**Author:** ![Flora72](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/flora72/32/32553_2.png) [@Flora72](https://forum.gl-inet.com/u/Flora72)\ **Post date:** [March 20, 2026, 2:10am UTC](https://forum.gl-inet.com/t/gl-rm10-no-local-web-access/67721/3 "2026-03-20T02:10:10Z")
Have you tried accessing it locally using glkvm or glkvm.local in your browser? Are there any error messages? ---
**Author:** ![WyvernLang](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/wyvernlang/32/32919_2.png) [@WyvernLang](https://forum.gl-inet.com/u/WyvernLang)\ **Post date:** [March 20, 2026, 8:26am UTC](https://forum.gl-inet.com/t/gl-rm10-no-local-web-access/67721/4 "2026-03-20T08:26:08Z")
Same here, can’t access RM10 in LAN through glkvm.local or local IP. It’s fine in 1.8.1 beta firmware. And happened after upgraded to 1.8.2 firmware. ---
**Author:** ![WyvernLang](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/wyvernlang/32/32919_2.png) [@WyvernLang](https://forum.gl-inet.com/u/WyvernLang)\ **Post date:** [March 20, 2026, 9:23am UTC](https://forum.gl-inet.com/t/gl-rm10-no-local-web-access/67721/5 "2026-03-20T09:23:56Z")
Solved by upgrading without keep the old settings. ---
**Author:** ![minmie](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/minmie/32/25223_2.png) [@minmie](https://forum.gl-inet.com/u/minmie)\ **Post date:** [March 20, 2026, 9:27am UTC](https://forum.gl-inet.com/t/gl-rm10-no-local-web-access/67721/6 "2026-03-20T09:27:01Z")
Strange , can anyone provide a debug log to us ? ![image](https://forum-static.gl-inet.com/original/3X/e/7/e72c5c2f2fa1b4ae3e5431717b85e54127c6466f.jpeg) ---
**Author:** ![WBIII](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/wbiii/32/32903_2.png) [@WBIII](https://forum.gl-inet.com/u/WBIII)\ **Post date:** [March 21, 2026, 3:49am UTC](https://forum.gl-inet.com/t/gl-rm10-no-local-web-access/67721/7 "2026-03-21T03:49:38Z")
Checked about an hour later and still did not work. Just now checked again and it is working. New logs attached [system\_logs\_20260320\_182959.zip](https://forum.gl-inet.com/uploads/short-url/etSZQvXc4kyr047KXNzGazbGxU6.zip) (69.4 KB) ---
**Author:** ![WBIII](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/wbiii/32/32903_2.png) [@WBIII](https://forum.gl-inet.com/u/WBIII)\ **Post date:** [March 21, 2026, 3:50am UTC](https://forum.gl-inet.com/t/gl-rm10-no-local-web-access/67721/8 "2026-03-21T03:50:12Z")
[system\_logs\_20260320\_154007.zip](https://forum.gl-inet.com/uploads/short-url/jObjdrttRrLE16rKKLryI6cMw9j.zip) (64.4 KB) New logs after upgrade. Web access is still not working about 10 minutes after rebooting. Will try again in a few hours ---
**Author:** ![WBIII](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/wbiii/32/32903_2.png) [@WBIII](https://forum.gl-inet.com/u/WBIII)\ **Post date:** [March 21, 2026, 3:50am UTC](https://forum.gl-inet.com/t/gl-rm10-no-local-web-access/67721/9 "2026-03-21T03:50:16Z")
I left after posting this and by the time I came back this morning it was working. I then rebooted the thing and it is once again not working in the browser. Guessing if I wait an hour or so it will start working. Windows app is working fine. Logs are attached. Looks like a new Firmware version just came out - it was not showing that yesterday. Will apply that and retest. its currently on V1.8.1 release1 will apply V1.8.2 release1 now. [system\_logs\_20260320\_152855.zip](https://forum.gl-inet.com/uploads/short-url/iLFmOlknFfBnZN0rmlTDnR72Rng.zip) (69.1 KB) ---
**Author:** ![WBIII](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/wbiii/32/32903_2.png) [@WBIII](https://forum.gl-inet.com/u/WBIII)\ **Post date:** [March 21, 2026, 2:11pm UTC](https://forum.gl-inet.com/t/gl-rm10-no-local-web-access/67721/10 "2026-03-21T14:11:01Z")
The posts I made appear to have been approved out of order. Just to be clear, as of now it will work after the comet has been turned on for 4 or 5 hours. After each reboot it no longer works ---
**Author:** ![minmie](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/minmie/32/25223_2.png) [@minmie](https://forum.gl-inet.com/u/minmie)\ **Post date:** [March 23, 2026, 3:29am UTC](https://forum.gl-inet.com/t/gl-rm10-no-local-web-access/67721/11 "2026-03-23T03:29:38Z")
I suggest you check if the router has any configurations like LAN isolation, or try using a different browser. From the logs, there doesn’t seem to be any issues at all. ---
**Author:** ![WyvernLang](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/wyvernlang/32/32919_2.png) [@WyvernLang](https://forum.gl-inet.com/u/WyvernLang)\ **Post date:** [March 27, 2026, 3:20am UTC](https://forum.gl-inet.com/t/gl-rm10-no-local-web-access/67721/12 "2026-03-27T03:20:51Z")
I found another solution about this… it’s AP Isolation. My router is GLBE3600, I found I cannot have access or ping to my LAN devices this morning, Destination host unreachable. Then I enabled the AP Isolation and turned it off in router’s admin panel, it worked. really odd, I haven't made any modifications to the router configuration before today, and I’ve able to access glkvm.local in the past few days. ---
**Author:** ![system](https://forum-static.gl-inet.com/original/3X/7/7/77e28f6cb342ac4bd641bd9a6254595d61b2812a.png) [@system](https://forum.gl-inet.com/u/system)\ **Post date:** [June 25, 2026, 3:21am UTC](https://forum.gl-inet.com/t/gl-rm10-no-local-web-access/67721/13 "2026-06-25T03:21:09Z")
This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.