# GL-X3000 Spitz AX - 15 Mbit/s with 5G

**URL:** <https://forum.gl-inet.com/t/gl-x3000-spitz-ax-15-mbit-s-with-5g/41105>\
**Category:** Cellular, USB modems\
**Created:** [April 17, 2024, 5:03pm UTC](https://forum.gl-inet.com/t/gl-x3000-spitz-ax-15-mbit-s-with-5g/41105 "2024-04-17T17:03:12Z")\
**Posts on this page:** 1\
**Showing post:** 28

<div class="post-metadata">

**Author:** ![EricG](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/e/e0b2c6/32.png) [@EricG](https://forum.gl-inet.com/u/EricG)\
**Post date:** [April 20, 2024, 2:11pm UTC](https://forum.gl-inet.com/t/gl-x3000-spitz-ax-15-mbit-s-with-5g/41105/28 "2024-04-20T14:11:23Z")

</div>

Ali,

I wonder if it’s the mbn profile for Telekom that is preventing 5g NSA connection? Maybe try the ROW\_Commercial mbn profile (it’s the last one in your list). You might try the following but use the ROW\_Commercial mbn profile:

> [@GL-X3000 with TMO Home Internet APN issue?](https://forum.gl-inet.com/t/gl-x3000-with-tmo-home-internet-apn-issue/38966/2):
>
> UPDATE - I THINK I SOLVED THIS MYSELF and putting it out here for the group to see. (1) It appears that the “autoselect” MBB in the modem picked COMMERCIAL-Tmobile, which would be normally ok. BUT I seemed to remember something about selecting a generic profile in the modem. I listed the profiles here: AT+QMBNCFG=“list” And found a “generic looking” profile as: “ROW\_Commercial”,0xA010809,202306011 (2) Used the following AT command strings. Turned off auto select and deactivate with AT+QM…

This is from the above link but modified for the ROW\_Commercial mbn profile:

(1) It appears that the “autoselect” MBB in the modem picked COMMERCIAL-Tmobile, which would be normally ok. BUT I seemed to remember something about selecting a generic profile in the modem.

I listed the profiles here:

```auto
AT+QMBNCFG="list"

```

And found a “generic looking” profile as: `"ROW_Commercial",0xA010809,202306011`

(2) Used the following AT command strings.

Turned off auto select and deactivate with

```auto
AT+QMBNCFG="AutoSel",0

```

And then entered:

```auto
AT+QMBNCFG="Deactivate"

```

Then selected the proper “generic” modem

```auto
AT+QMBNCFG="Select", "ROW_Commercial"

```

Checked to be sure the profile is selected:

```auto
AT+QMBNCFG="list"

```

You should see the ROW\_Commercial entry at the top of the list now.

Then REBOOT.

MAKE SURE YOU TYPE IN THE AT COMMANDS. DO NOT COPY AND PASTE!!!

If changing to the ROW\_Commercial mbn profile does not work, you can switch back to auto select by doing the following command:

```auto
AT+QMBNCFG="AutoSel",1

```

---

_[View the full topic](https://forum.gl-inet.com/t/gl-x3000-spitz-ax-15-mbit-s-with-5g/41105)._