Gli Mudi connects with no internet

kamranmehboob · 2022-08-19T09:31:34.271Z

Hi there, I have recently purchased the Mudi travel router, it shows connected on the interface - however, devices (laptop) shows no internet. I have rebooted many times, can you please advise.

alzhao · 2022-08-19T10:48:22.442Z

Can you drop me an email support at glinet.biz?

Pls give details e.g. carrier, screenshot of the UI, settings, firmware version.

tecnofotosa · 2024-04-26T21:16:50.841Z

Hello, I also have the same problem on GL.inet E750 mudi, I had version 3.217, it had a WiFi problem, it connected and disconnected continuously, I updated to 4.3.12 and now the WiFi connection seems more stable but that’s what happens, no internet , the company is Vodafone SPAIN.

You can do some test for the stability of the Wi-Fi connection.
We sell quite a few mudi routers, and quite a few are returned to us with booting problems, they do not finish starting, it is a good product, I hope that with the latest update, these problems will be corrected, I hope you can help me with the main issue to provide customer support

WhatsApp Image 2024-04-26 at 20.52.051084×1710 149 KB

ywp · 2024-05-06T07:24:12.842Z

hello, does the device actually have a network?

tecnofotosa · 2024-05-06T13:50:42.652Z

If you access the internet without problem, the VPN is active.
In the configuration panel the traffic appears as sent and received and in the vpn the same

ywp · 2024-05-07T01:21:05.612Z

ls /tmp/run/mwan3
Take a look at the return result of this command
Disable multi-wan load

tecnofotosa · 2024-10-01T19:23:15.788Z

ywp:

/tmp/run/mwan3

It turns off, it says that it does not give internet when connecting via wifi, and it works slowly. I send you the log, but it gives me problems in several routers, the same thing always happens, in which section can I put the terminal, for the command
logread.tar (114.5 KB)

214 / 5.000
It turns off, it says that it does not give internet when connecting via wifi, and it works slowly. I send you the log, but it gives me problems in several routers, the same thing always happens, in which section can I put the terminal, for the command

CREATED N_J_V_address_external=address-external SHLVL=2 J_V_keep=1 HOME=/ HOTPLUG_TYPE=wireguard T_J_V_interface=string J_V_ifname=wgclient T_J_V_link_up=boolean LOGNAME=root DEVICENAME= T_J_V_action=int TERM=linux SUBSYSTEM=wireguard PATH=/usr/sbin:/usr/bin:/sbin:/bin CONFIG_LIST_STATE= J_V_interface=wgclient K_J_V= action ifname link_up address_external keep interface J_V_link_up=1 J_V_action=0 T_J_V_address_external=boolean N_J_V_link_up=link-up T_J_V_keep=boolean PWD=/ JSON_CUR=J_V CONFIG_SECTIONS=global AzireVPN Mullvad FromApp group_9617 group_2584 group_1903 group_7155 peer_2001 CONFIG_cfg030f15_ports=
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: started, version 2.86 cachesize 150
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: DNS service limited to local subnets
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP conntrack ipset auth cryptohash DNSSEC no-ID loop-detect inotify dumpfile
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: UBus support enabled: connected to system bus
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq-dhcp[1]: DHCP, IP range 192.168.8.100 -- 192.168.8.249, lease time 12h
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: using only locally-known addresses for test
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: using only locally-known addresses for onion
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: using only locally-known addresses for localhost
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: using only locally-known addresses for local
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: using only locally-known addresses for invalid
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: using only locally-known addresses for bind
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: using only locally-known addresses for lan
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: reading /tmp/resolv.conf.d/resolv.conf.wg
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: using nameserver 10.2.0.1#53
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: using only locally-known addresses for test
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: using only locally-known addresses for onion
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: using only locally-known addresses for localhost
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: using only locally-known addresses for local
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: using only locally-known addresses for invalid
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: using only locally-known addresses for bind
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: using only locally-known addresses for lan
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: read /etc/hosts - 4 addresses
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 3 addresses
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Tue Oct 1 21:08:46 2024 user.notice firewall: Reloading firewall due to ifdown of wgclient ()
Tue Oct 1 21:08:53 2024 user.notice mwan3[16475]: Execute ifup event on interface wgclient (wgclient)
Tue Oct 1 21:08:54 2024 user.notice mwan3[16475]: Starting tracker on interface wgclient (wgclient)
Tue Oct 1 21:08:59 2024 user.info mwan3rtmon[6655]: Detect rtchange event.
Tue Oct 1 21:09:02 2024 user.notice firewall: Reloading firewall due to ifup of wgclient (wgclient)

alzhao · 2024-10-02T07:17:37.735Z

As you have vpn enabled, what we need to check if the Internet works OK without VPN. So we can narrow down to cellular or vpn part.

ywp · 2024-10-08T03:01:44.391Z

Can you try turning off the vpn？