Help me. resistor miss

KostyaN · 2020-05-11T09:42:21.171Z

Hellow. I have gl-mt300a. When i open a case, I lost resistor. Tell me the value of the resistor R151. Thank you for any help!

alzhao · 2020-05-11T10:14:48.472Z

Pls use 0402/10KΩ resistor.

KostyaN · 2020-05-11T10:15:47.814Z

Thank you very much!

alzhao · 2020-05-11T10:52:29.297Z

Just one more hint. Your PCB is damaged, you may need to jump wire and solder the two pins.

KostyaN · 2020-05-11T10:58:44.297Z

And the two pin is winbond pin? e1fd3885e4e2793348f14dd95fb15c4d5107d9c3

alzhao · 2020-05-11T11:00:05.959Z

It seems one pin to me.

KostyaN · 2020-05-11T11:02:07.256Z

I mean R151 connect with pin of winbond? Sorry for my bed english

alzhao · 2020-05-13T10:53:29.056Z

I think so. This is not easy!

Johnex · 2020-05-13T11:01:18.888Z

To me it looks like the trace that broke with the resistor is not going directly to the Winboard chip, looks like it continues next to it.

I recommend you just scrape some of the track where the resistor was, and solder a small jumper there, avoiding the chip just to be sure.