Help need to create specific route VPN and NAT on Flint 1

Technical Support for Routers VPN, DNS, Leaks
1

I have GL-AX1800 flint 1.I have setup wireguard client. What i want to achieve is

  1. Set up rules that specific IP and specific port in my LAN use the VPN
  2. NAT this IP (now has to be wireguard VPN) and port

Any ideas

2

Hello,

Supported setting rules for specified MAC.
This can also achieve go to VPN for specific clients.

Setting rules for the specified IP or port is not supported.

image
image1321×866 46.8 KB

4

I know this roule . It push the traffic of a specific ip or mac to the vpn client. I want specific ip and port. Eg lets say a rule that ip 192.168.0.100 port 3333 goes through wireguard client all other traffic goes normal Internet

5

I think this is a new request for the GL GUI.

But you can implement this through Luci firewall or SSH iptables.