Hotel blocking personal router

bOcy · 2020-02-11T15:53:38.684Z

i am guessing you need to SSH into router and execute the command

sammo · 2020-02-11T16:18:21.429Z

so further investigation
https://www.reddit.com/r/networking/comments/48v0l0/air_marshall_containment_and_how_to_stop_it/

Actually it can “contain” by sending deauth frames to any of the neighbours that you have flagged as malicious rogue.
I thought the FCC strongly disapproved with people jamming wifi

So they are jamming your AP, Nothing can be done.
The only possible is setup your AP with same mac/ssid/bssid as hotel AP

Johnex · 2020-02-11T19:08:44.488Z

Yeah, run some counter measures. Do as @sammo recommended, see if it helps.

Fight fire with fire. One thing you can do is go to the pool area for example, somewhere far where there still is Wifi. Connect to that AP and get the AP MAC Address. Write it down. Go back to your area of the hotel and then set up the GL router to the same MAC, AP name etc.

They won’t block their own AP’s, but they could be checking things like IP’s assigned and so on. It’s worth a try at least. Worse case, just find a loose network cable at the hotel, maybe in their conference room and put your router there

rp201rp · 2020-02-11T19:38:07.903Z

Johnex:

Worse case, just find a loose network cable at the hotel, maybe in their conference room and put your router there

or when the maid is cleaning a tub down the hall grab her keys from her kart and commando the towel closet looking for a POE ethernet line or hub.

Johnex · 2020-02-11T20:05:11.107Z

Yes, or, you can wait for the new GL-iNet AP1300, and just remove the shitty Cisco AP the hotel will have on the ceiling, and place your own there. Nobody would ever know Even the IT guys will walk by and think “hmm, that one looks slicker than usual, but its working, can’t be that” and move on.

sammo · 2020-02-11T23:51:03.266Z

Connecting your router to their LAN does not help. They are actively jamming AP. What you need is a Faraday cage.

alzhao · 2020-02-12T02:17:30.602Z

sammo:

So they are jamming your AP, Nothing can be done.

Does it work if you turn off your AP, connect your pc to the LAN port and only set up repeater connection to their network?

Or can we jam cisco ap as well?

sfx2000 · 2020-02-12T04:49:18.899Z

rp201rp:

I wasn’t aware of usb150 does client mode. is that with the latest testing version 3.1? thanks in advance.

“Client Mode” is Repeater with the AP turned off… which effectively turns the USB150 into a client station, as it’s not sending out beacon/management frames, as one is only connected over the USB ethernet to the laptop.

I do find this handy, as I’ve got it running as a WG client

sammo · 2020-02-12T04:56:31.376Z

They are actively scanning and jamming foreign AP. Jamming works both. By jamming them you can’t connect to their AP. I wasn’t kidding about a Faraday cage aka tin foil. You will need 2 routers linked by ethernet. The client router connects to hotel AP. The AP’s router is protected behind the Faraday cage. Or you can boycott the hotel

Would also works with usb tethering with a long usb cable.

sammo · 2020-02-12T05:20:58.358Z

Another option is move to WPA3.

news.ycombinator.com

WiFi deauthentication attacks and home security

545 points — 222 comments — edward — 7:48 AM - 27 Dec 2019

WPA3 is the way to go. You can have the client on WPA2 and your AP on WPA3. Android, Apple and Microsoft supports the protocol.

alzhao · 2020-02-12T06:22:50.119Z

Does it work if you make the SSID hidden, not turned off?

sfx2000 · 2020-02-12T06:59:50.117Z

Still sends out Beacon and Management Frames - so the AP will be deauthed…

sfx2000 · 2020-02-12T07:00:49.020Z

WPA3 won’t help here…

sammo · 2020-02-12T07:39:20.467Z

Can you shed some light why WPA3 does not prevent deauth attacks?

Wi-Fi alliance has made it mandatory for WPA3 devices to support PMF (Protected Management Frames). PMF implies that management frames (E.G. – Deauthentication) are protected and would prevent spoofing by unauthenticated clients or rogue devices.

Almahadeus · 2020-02-12T09:52:13.641Z

Thanks alzhao. I will attempt to connect to PC (if I can find one in the hotel) via LAN but will the router still theoretically be able to use connect to hotel WiFi in the repeater if wireless radio is off? BTW, I have managed to easily use a Huawei Mifi unit as a WiFi extender (without a SIM) to connect to the hotel WiFi and then use cable tethering to the GL.iNet unit and this daisy chain setup appears to have been working perfectly but I am quite surprised that the huawei device doesn’t appear to have been blocked by the hotel system. Is this possibly due to fact that the device is primarily designed to work as LTE router rather than a WiFi repeater/hotspot?

alzhao · 2020-02-12T09:54:59.934Z

If you turn off the wifi you can still set up repeater via a cable.

If you can connect via Huawei Mifi and use GL.iNet as AP, then it seems not ap jam.

There must be something else.

Almahadeus · 2020-02-12T13:00:01.659Z

Not much of an update really but connecting the router to a PC via LAN, disabling wireless of the router and trying to connect to hotel WiFi has not worked. Also cloning the hotel’s MAC and then the desktop PC’s MAC to the router (without cloning SSID) have also not made any difference. I am starting to suspect that this could all be due to some sort of an incompatibility issue with GL.iNet as all other devices (phone, tablet, firestick, desktop PC and MiFi unit) have been able to connect to the hotel WiFi with no issues at all.

lostdog · 2020-02-12T16:40:22.473Z

Not that it will help with the repeater setup, but check around your room for a standard LAN port in the walls and plug in to that. I have found quite a few times they are forgotten and hidden behind the bed or couch but still active.

Another thing to look at is the TV. I’ve found in Marriott (and sometimes other) properties many times the TV is hooked up to a box (attached to the back of the TV) that acts as a client for their network based television system. I’ve found there is often a LAN port on this and sometimes it’s unblocked full speed internet. At a place I was staying at a few weeks ago I was getting about 35Mbs from it without even hitting their captive portal. Going through their standard Wifi it was about 5Mbs.

sfx2000 · 2020-02-13T03:26:55.350Z

sammo:

Can you shed some light why WPA3 does not prevent deauth attacks?

Wi-Fi alliance has made it mandatory for WPA3 devices to support PMF (Protected Management Frames). PMF implies that management frames (E.G. – Deauthentication) are protected and would prevent spoofing by unauthenticated clients or rogue devices.

Won’t help for a long, long time, as a vast majority of the devices out there are WiFi 4/5, and PMF is optional there - so they just deploy that.

sfx2000 · 2020-02-15T05:56:46.871Z

Keeping an eye on this topic - might have a chance to see things first hand…

Have tools and knowledge to explore further