# How to configure GL.iNet router to use NetBird exit node as Internet

**URL:** <https://forum.gl-inet.com/t/how-to-configure-gl-inet-router-to-use-netbird-exit-node-as-internet/66137>\
**Category:** Router\
**Created:** [December 16, 2025, 12:20pm UTC](https://forum.gl-inet.com/t/how-to-configure-gl-inet-router-to-use-netbird-exit-node-as-internet/66137 "2025-12-16T12:20:22Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![bruce](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bruce/32/35649_2.png) [@bruce](https://forum.gl-inet.com/u/bruce)\
**Post date:** [December 16, 2025, 12:20pm UTC](https://forum.gl-inet.com/t/how-to-configure-gl-inet-router-to-use-netbird-exit-node-as-internet/66137/1 "2025-12-16T12:20:22Z")

</div>

> **The content of this tutorial may be outdated. Please refer to the new tutorial below:**

> [@How to Install NetBird on GL.iNet Routers and Route Traffic Through an Exit Node](https://forum.gl-inet.com/t/how-to-install-netbird-on-gl-inet-routers-and-route-traffic-through-an-exit-node/72161):
>
> Background The official NetBird binary installer can install the NetBird client on GL.iNet routers, including models based on OpenWrt 21/23 branches. Two additional details need to be handled on these systems: Some firmware versions do not provide the service command expected by the installer. NetBird stores its default profile under /var/lib/netbird. On GL.iNet firmware, /var is stored in RAM, so the profile can be lost after a reboot. This guide uses the official NetBird binary installer, t…

* * *

Dear Users,

NetBird is a similar to software for remote virtual networking with firmware pre-installed Tailscale, Zerotier, AstraWarp _(Powered by GL.iNet)_, but NetBird is not pre-installed in the router firmware (as of the publication of the topic, we have no plans to pre-install NetBird in GL firmware).

Some users may still would like to use NetBird because they already have some devices that have been installed and bound to NetBird, and the NetBird device hosted an exit node.

Since the GLiNet router opens a powerful terminal, we can SSH login to the router and install and use Netbird.

Follow this guide to install NetBird on your GLiNet router, bind the router to NetBird and implement virtual networking, allow NetBird devices to remote access each other, and configure the GLiNet router to use NetBird's exit node as the Internet.

## Guide:

1. SSH to the router: [SSH log in to the Router - GL.iNet Router Docs 4](https://docs.gl-inet.com/router/en/4/tutorials/ssh_log_in_to_the_router/)

2. Install NetBird on router:`curl -fsSL https://pkgs.netbird.io/install.sh | sh`  

3. Run NetBird and bind Key:`netbird up --setup-key <SETUP KEY>`  
[How to create your SETUP KEY?](https://docs.netbird.io/manage/peers/access-infrastructure/setup-keys-add-servers-to-network)  
 ![image](https://forum-static.gl-inet.com/original/3X/5/6/567022c4f79df637f1f1230eb28c9973dca5779e.png)

4. Configure the exit node and advertise the network route `0.0.0.0/0`, follow this: [Configuring Exit Nodes for Internet Traffic - NetBird Docs](https://docs.netbird.io/manage/network-routes/configuring-default-routes-for-internet-traffic#exit-node-selection-and-auto-apply-behavior)  

5. Check whether NetBird routing advertisement is obtained: `netbird status -d`  

6. Add a NetBird zone to the firewall, allow forwarding to LAN and WAN, and enable Masquerade:  

7. Add NetBird to auto startup and persist:

```auto
sed -i '/^exit 0/i\
sleep 30\
netbird service install\
netbird service start' /etc/rc.local

```

1. Check in the LAN client of the router, like a PC, the Internet exit is using the NetBird hosted exit node:  
 ![image](https://forum-static.gl-inet.com/original/3X/a/e/ae89461064747bd89e2d909873c5f157eb5a25fc.png)  
CMD `curl ipinfo.io` , or visit [ipinfo.io](http://ipinfo.io), [whatismyipaddress.com](http://whatismyipaddress.com), [whatsmyip.com](http://whatsmyip.com) on the browser  
 ![image](https://forum-static.gl-inet.com/original/3X/7/b/7b89f40c35870824f50d94f1a3a4d3823e9fb0c5.png)

-end

**Common Commands:**

```auto
/etc/init.d/netbird restart
netbird down
netbird up
netbird status
netbird status -d

```

**Tips:**

1. Not all router software architectures support to install the NetBird. Please refer to the official NetBird, you can contact NetBird technical support to confirm if the installation is failed.
2. Before configuration, recommended that manually backup your router configuration first. If the NetBird configuration is abnormal, you can reset the firmware at will and restore this backup to return to the personal configuration that was used normally before.
3. If you have no special needs, better to use the pre-installed AstraWarp, Tailscale, and Zerotier because they have GL GUI and the configuration process will be easier.
4. Some guidelines refer to NetBird's Docs ([https://docs.netbird.io](https://docs.netbird.io)). If there are configuration updates caused by NetBird plug-in updates, please refer to the above official Docs to troubleshoot by yourself.

---

<div class="post-metadata">

**Author:** ![beniamin](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/beniamin/32/4794_2.png) [@beniamin](https://forum.gl-inet.com/u/beniamin)\
**Post date:** [December 17, 2025, 3:03am UTC](https://forum.gl-inet.com/t/how-to-configure-gl-inet-router-to-use-netbird-exit-node-as-internet/66137/2 "2025-12-17T03:03:07Z")

</div>

This is great! Thank you. I just found out about netbird

---

<div class="post-metadata">

**Author:** ![system](https://forum-static.gl-inet.com/original/3X/7/7/77e28f6cb342ac4bd641bd9a6254595d61b2812a.png) [@system](https://forum.gl-inet.com/u/system)\
**Post date:** [March 17, 2026, 3:04am UTC](https://forum.gl-inet.com/t/how-to-configure-gl-inet-router-to-use-netbird-exit-node-as-internet/66137/3 "2026-03-17T03:04:03Z")

</div>

This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.

---

<div class="post-metadata">

**Author:** ![bruce](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bruce/32/35649_2.png) [@bruce](https://forum.gl-inet.com/u/bruce)\
**Post date:** [June 29, 2026, 2:49am UTC](https://forum.gl-inet.com/t/how-to-configure-gl-inet-router-to-use-netbird-exit-node-as-internet/66137/4 "2026-06-29T02:49:09Z")

</div>

Luci Web UI for netbird on op24/25:

> [@Luci-app-netbird: Web UI for NetBird on OpenWrt 24.x and 25.x](https://forum.gl-inet.com/t/luci-app-netbird-web-ui-for-netbird-on-openwrt-24-x-and-25-x/69533):
>
> LuCI app for the [NetBird](https://netbird.io/) mesh-VPN client on OpenWrt — manage NetBird on OpenWrt from the router, no command line needed. Compatible with OpenWrt 24.x (opkg) and 25.x (apk).\*\* GitHub repository: [GitHub - dont-touchme/luci-app-netbird: LuCI app for the NetBird mesh-VPN client on OpenWrt / ImmortalWrt · GitHub](https://github.com/dont-touchme/luci-app-netbird)Features Surfaces the NetBird client's capabilities in the LuCI UI: Connect / reconnect / disconnect / deregister; self-hosted management Automatic reconnect after transient outages…

---

<div class="post-metadata">

**Author:** ![bruce](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bruce/32/35649_2.png) [@bruce](https://forum.gl-inet.com/u/bruce)\
**Post date:** [September 21, 2026, 8:34am UTC](https://forum.gl-inet.com/t/how-to-configure-gl-inet-router-to-use-netbird-exit-node-as-internet/66137/5 "2026-09-21T08:34:29Z")

</div>



---

<div class="post-metadata">

**Author:** ![pluginwizard](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/p/bcef8e/32.png) [@pluginwizard](https://forum.gl-inet.com/u/pluginwizard)\
**Post date:** [October 13, 2026, 12:15pm UTC](https://forum.gl-inet.com/t/how-to-configure-gl-inet-router-to-use-netbird-exit-node-as-internet/66137/6 "2026-10-13T12:15:29Z")

</div>

does this procedure work on Brume3?

what is the way to update the netbird version? reinstall over the already installed one, or what other method?

---

<div class="post-metadata">

**Author:** ![will.qiu](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/w/b38774/32.png) [@will.qiu](https://forum.gl-inet.com/u/will.qiu)\
**Post date:** [October 19, 2026, 8:30am UTC](https://forum.gl-inet.com/t/how-to-configure-gl-inet-router-to-use-netbird-exit-node-as-internet/66137/7 "2026-10-19T08:30:56Z")

</div>

Hi,

We have checked and replied in your separate thread. Please refer to:

> [@Netbird on Brume3](https://forum.gl-inet.com/t/netbird-on-brume3/72021/3):
>
> Hi, For questions 1, 3, 4, and 5, please refer to our new guide, which covers installation, reboot persistence, updates, and removal: For question 2, this setup does not provide a graphical interface. All NetBird installation, configuration, update, and removal operations must be performed through the CLI over SSH. Please note that NetBird is not an officially supported feature of GL.iNet firmware. This setup is provided on a best-effort basis, so technical support may be limited.

---

<div class="post-metadata">

**Author:** ![will.qiu](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/w/b38774/32.png) [@will.qiu](https://forum.gl-inet.com/u/will.qiu)\
**Post date:** [October 19, 2026, 8:31am UTC](https://forum.gl-inet.com/t/how-to-configure-gl-inet-router-to-use-netbird-exit-node-as-internet/66137/8 "2026-10-19T08:31:08Z")

</div>


