# How to Generate and Import NordVPN WireGuard Profiles on GL.iNet Routers

**URL:** <https://forum.gl-inet.com/t/how-to-generate-and-import-nordvpn-wireguard-profiles-on-gl-inet-routers/68837>\
**Category:** VPN, DNS, Leaks\
**Tags:** KB\
**Created:** [May 20, 2026, 2:55am UTC](https://forum.gl-inet.com/t/how-to-generate-and-import-nordvpn-wireguard-profiles-on-gl-inet-routers/68837 "2026-05-20T02:55:34Z")\
**Posts on this page:** 10\
**Page:** 1

<div class="post-metadata">

**Author:** ![will.qiu](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/w/b38774/32.png) [@will.qiu](https://forum.gl-inet.com/u/will.qiu)\
**Post date:** [May 20, 2026, 2:55am UTC](https://forum.gl-inet.com/t/how-to-generate-and-import-nordvpn-wireguard-profiles-on-gl-inet-routers/68837/1 "2026-05-20T02:55:34Z")

</div>

### Background

Recently, NordVPN changed the availability of one of the APIs used by GL.iNet routers to retrieve WireGuard profiles. As a result, newly generated NordVPN tokens may no longer work properly with the existing method.

Our R&D team is working hard to communicate with NordVPN to restore API availability as soon as possible.

This tutorial provides alternative ways to obtain NordVPN WireGuard configuration files, so that they can be manually imported into GL.iNet routers and used with the WireGuard Client.

* * *

### Prerequisites

Before following this guide, please obtain your NordVPN token first.

You can refer to Step 1 of the following GL.iNet guide:

> **[Set Up NordVPN - OpenVPN Client - GL.iNet Router Docs 4](https://docs.gl-inet.com/router/en/4/interface_guide/openvpn_client/#set-up-nordvpn)**
>
> OpenVPN is an open‑source VPN protocol that uses virtual private network techniques to establish secure site‑to‑site or point‑to‑point connections. | Documentation for GL.iNet Router Productions

* * *

## Method 1: Use a Third-Party NordVPN WireGuard Configuration Generator

This is the easier method. It allows you to generate NordVPN WireGuard configuration files from a web page and then import them into the router.

> **Note:**
> 
> The websites below are third-party tools and are not officially maintained by GL.iNet or NordVPN.
> 
> Please use them at your own discretion. You will need to enter your NordVPN token on the website.

### Step 1: Open a NordVPN WireGuard configuration generator

You can use either of the following websites:

- Deployed by @admon:  
[https://nordvpn-config.admon.me/](https://nordvpn-config.admon.me/)

- Deployed by the GitHub project author:  
[https://nord-configs-crafter.pages.dev/](https://nord-configs-crafter.pages.dev/)

Project GitHub page:

> **[GitHub - mustafachyi/NordVPN-WireGuard-Config-Generator: A high performance Python CLI for generating...](https://github.com/mustafachyi/NordVPN-WireGuard-Config-Generator)**
>
> A high performance Python CLI for generating optimized NordVPN WireGuard configurations based on server load and proximity.

* * *

### Step 2: Configure your NordVPN token

Open the sidebar and enter your NordVPN token.

 ![image](https://forum-static.gl-inet.com/original/3X/9/f/9f8bef3475c3a3dd9fb869b61277a7c3e22c9e98.png)

 ![image](https://forum-static.gl-inet.com/original/3X/f/5/f5d9ea31bcddc3c08421a1fa180d45a3000aa3d7.png)

* * *

### Step 3: Download the WireGuard configuration files

After the token is configured, the page will automatically return to the server list.

You can download the profile for a specific country, or download all profiles.

 ![image](https://forum-static.gl-inet.com/original/3X/4/c/4c63782a1c87eab66d76cf841a667efe4c18ad2a.png)

After downloading the `.conf` file or ZIP archive, you can import it into the router. See the import section below:

> [@How to Generate and Import NordVPN WireGuard Profiles on GL.iNet Routers](https://forum.gl-inet.com/t/how-to-generate-and-import-nordvpn-wireguard-profiles-on-gl-inet-routers/68837/4):
>
> How to Import the Profile into the Router Step 1: Open the WireGuard Client page For firmware v4.9: Go to: Admin Panel -\> VPN -\> VPN Client Profile Then click Add Manually. For firmware v4.8: Go to: Admin Panel -\> VPN -\> WireGuard Client and add a manual WireGuard profile group. You can refer to this guide: Step 2: Import or paste the WireGuard configuration If you used Method 1 Click Select a file to upload or drag it here. Upload the NordVPN WireGuard .conf file downloa…

* * *

## Method 2: Use the Official NordVPN Lite Client

This method uses the official NordVPN Lite client to generate the WireGuard configuration directly on the router.

> **Important:**
> 
> This method may interrupt remote access to the router.
> 
> Please only use this method when you have local access to the router, or when you are sure you can reconnect to the device if the VPN connection changes the route.

* * *

### Step 1: Check the router architecture

SSH into the router and run:

```sh
cat /etc/os-release | grep OPENWRT_ARCH

```

This method is supported only if the returned architecture is one of the following:

```plaintext
aarch64_cortex-a53
mipsel_24kc

```

* * *

### Step 2: Download the correct NordVPN Lite package

Open the NordVPN Lite download page:

[https://downloads.nordcdn.com/nordvpnlite/](https://downloads.nordcdn.com/nordvpnlite/)

 ![image](https://forum-static.gl-inet.com/original/3X/a/e/aecc814392f0ee81dd5308d84aa28a70913027b0.png)

For `aarch64_cortex-a53`, use:

```plaintext
https://downloads.nordcdn.com/nordvpnlite/latest/nordvpnlite_latest_aarch64_cortex-a53.ipk

```

For `mipsel_24kc`, use:

```plaintext
https://downloads.nordcdn.com/nordvpnlite/latest/nordvpnlite_latest_mipsel_24kc.ipk

```

* * *

### Step 3: Install the NordVPN Lite package

For `aarch64_cortex-a53`:

```sh
wget https://downloads.nordcdn.com/nordvpnlite/latest/nordvpnlite_latest_aarch64_cortex-a53.ipk
opkg install nordvpnlite_latest_aarch64_cortex-a53.ipk

```

For `mipsel_24kc`:

```sh
wget https://downloads.nordcdn.com/nordvpnlite/latest/nordvpnlite_latest_mipsel_24kc.ipk
opkg install nordvpnlite_latest_mipsel_24kc.ipk

```

* * *

### Step 4: Configure the NordVPN token

Run the following command:

```sh
sed -i.bak 's|"authentication_token": "[^"]*"|"authentication_token": "YOUR_ACTUAL_TOKEN_HERE"|' /etc/nordvpnlite/config.json

```

Please replace `YOUR_ACTUAL_TOKEN_HERE` with your actual NordVPN token.

* * *

### Step 5: Optional: specify a country

By default, the NordVPN Lite client will use a recommended server.

If you want to generate a configuration for a specific country, you can modify the `vpn` field.

For example, to use Germany:

```sh
sed -i 's/"vpn": "recommended"/"vpn": { "country": "de" }/' /etc/nordvpnlite/config.json

```

You can replace `de` with the country code you want to use.

* * *

### Step 6: Start NordVPN Lite

Run:

```sh
nordvpnlite start

```

The official NordVPN Lite client will select a VPN server and create the WireGuard interface.

* * *

### Step 7: Display the generated WireGuard configuration

Run:

```sh
wg showconf nordvpnlite

```

Copy the output. You will need it when manually adding the WireGuard profile later.

 ![image](https://forum-static.gl-inet.com/original/3X/9/a/9ae3abe2d0be680afc369fa397b5c391f2f9fa56.png)

* * *

### Step 8: Check the WireGuard interface IP address

Run:

```sh
ip -br a show nordvpnlite

```

Write down the IP address shown in the output. You will need to add it as the `Address` field in the WireGuard configuration.

![image](https://forum-static.gl-inet.com/original/3X/a/c/ac5bab7e0a2de8e62f102ef04e5efd7d8c9bb5f9.png)

* * *

### Step 9: Stop NordVPN Lite

After copying the configuration and interface address, stop the NordVPN Lite client:

```sh
nordvpnlite stop

```

---

<div class="post-metadata">

**Author:** ![will.qiu](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/w/b38774/32.png) [@will.qiu](https://forum.gl-inet.com/u/will.qiu)\
**Post date:** [May 20, 2026, 2:56am UTC](https://forum.gl-inet.com/t/how-to-generate-and-import-nordvpn-wireguard-profiles-on-gl-inet-routers/68837/2 "2026-05-20T02:56:01Z")

</div>



---

<div class="post-metadata">

**Author:** ![will.qiu](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/w/b38774/32.png) [@will.qiu](https://forum.gl-inet.com/u/will.qiu)\
**Post date:** [May 20, 2026, 3:08am UTC](https://forum.gl-inet.com/t/how-to-generate-and-import-nordvpn-wireguard-profiles-on-gl-inet-routers/68837/4 "2026-05-20T03:08:18Z")

</div>

## How to Import the Profile into the Router

### Step 1: Open the WireGuard Client page

For firmware v4.9:

Go to:

```plaintext
Admin Panel -> VPN -> VPN Client Profile

```

Then click **Add Manually**.

 ![image](https://forum-static.gl-inet.com/original/3X/1/7/1747c180cb84fcbc1cd4fa8b54532f731f5aa3f2.png)

For firmware v4.8:

Go to:

```plaintext
Admin Panel -> VPN -> WireGuard Client 

```

and add a manual WireGuard profile group.

You can refer to this guide:

> **[Set Up WireGuard Client Manually (for other providers) - WireGuard Client -...](https://docs.gl-inet.com/router/en/4/interface_guide/wireguard_client/#set-up-wireguard-client-manually-for-other-providers)**
>
> Note: This guide applies to firmware v4.7 and later. For earlier versions, please refer here. | Documentation for GL.iNet Router Productions

* * *

### Step 2: Import or paste the WireGuard configuration

#### If you used Method 1

Click **Select a file to upload or drag it here**.

Upload the NordVPN WireGuard `.conf` file downloaded earlier.

If you clicked **Download All** , you can also upload the ZIP archive.

 ![image](https://forum-static.gl-inet.com/original/3X/b/9/b91e412ea10582db8516d7695273c7309428c936.png)

* * *

#### If you used Method 2

Click **Manually Add Configuration**.

 ![image](https://forum-static.gl-inet.com/original/3X/c/4/c4bb23c859cf045e4dff67ffacb6b15805e026cb.png)

Paste the WireGuard configuration copied from:

```sh
wg showconf nordvpnlite

```

Before saving it, please edit the configuration:

1. Remove the following lines:

```plaintext
ListenPort
FwMark

```

1. Add an `Address =` line under the `[Interface]` section.

The address should be the interface IP obtained from:

```sh
ip -br a show nordvpnlite

```

Example format:

```ini
[Interface]
PrivateKey = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Address = 10.x.x.x/xx

```

 ![image](https://forum-static.gl-inet.com/original/3X/7/a/7a553c9194cf691e4e3479a8f6b7bcff8481544c.png)

* * *

### Step 3: Enable the VPN profile

After the profile is imported or added manually, sinply enable it from the VPN Client page.

 ![image](https://forum-static.gl-inet.com/original/3X/0/f/0fdd5d22eb912d6e36e5de249a497a014b917933.png)

The router should now connect to NordVPN using the imported WireGuard profile.

* * *

## Notes

1. Method 1 is simpler and recommended for most users.
2. Method 2 uses the official NordVPN Lite client, but only works on supported architectures.
3. Method 2 may interrupt remote access, so please use it only when local access is available.
4. If one server profile does not connect, try generating or downloading another country/server profile.
5. If your NordVPN token is changed or regenerated, you may need to repeat the steps above.

* * *

## References

GL.iNet NordVPN setup guide:

> **[Set Up NordVPN - OpenVPN Client - GL.iNet Router Docs 4](https://docs.gl-inet.com/router/en/4/interface_guide/openvpn_client/#set-up-nordvpn)**
>
> OpenVPN is an open‑source VPN protocol that uses virtual private network techniques to establish secure site‑to‑site or point‑to‑point connections. | Documentation for GL.iNet Router Productions

GL.iNet WireGuard Client manual setup guide:

> **[Set Up WireGuard Client Manually (for other providers) - WireGuard Client -...](https://docs.gl-inet.com/router/en/4/interface_guide/wireguard_client/#set-up-wireguard-client-manually-for-other-providers)**
>
> Note: This guide applies to firmware v4.7 and later. For earlier versions, please refer here. | Documentation for GL.iNet Router Productions

NordVPN Lite setup guide:

> **[How to set up NordVPN on an OpenWRT router using NordVPN Lite?](https://support.nordvpn.com/hc/en-us/articles/41793554983953-How-to-set-up-NordVPN-on-an-OpenWRT-router-using-NordVPN-Lite)**
>
> IntroductionThis article explains how to set up a NordVPN connection on your OpenWrt router using the NordVPN Lite (nordvpnlite) client via the LuCI web interface or the command-line interface (CLI...

NordVPN WireGuard Config Generator project:

> **[GitHub - mustafachyi/NordVPN-WireGuard-Config-Generator: A high performance Python CLI for generating...](https://github.com/mustafachyi/NordVPN-WireGuard-Config-Generator)**
>
> A high performance Python CLI for generating optimized NordVPN WireGuard configurations based on server load and proximity.

---

<div class="post-metadata">

**Author:** ![bruce](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bruce/32/35649_2.png) [@bruce](https://forum.gl-inet.com/u/bruce)\
**Post date:** [May 20, 2026, 3:11am UTC](https://forum.gl-inet.com/t/how-to-generate-and-import-nordvpn-wireguard-profiles-on-gl-inet-routers/68837/5 "2026-05-20T03:11:29Z")

</div>



---

<div class="post-metadata">

**Author:** ![bruce](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bruce/32/35649_2.png) [@bruce](https://forum.gl-inet.com/u/bruce)\
**Post date:** [May 20, 2026, 3:12am UTC](https://forum.gl-inet.com/t/how-to-generate-and-import-nordvpn-wireguard-profiles-on-gl-inet-routers/68837/6 "2026-05-20T03:12:36Z")

</div>



---

<div class="post-metadata">

**Author:** ![bruce](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bruce/32/35649_2.png) [@bruce](https://forum.gl-inet.com/u/bruce)\
**Post date:** [May 20, 2026, 3:13am UTC](https://forum.gl-inet.com/t/how-to-generate-and-import-nordvpn-wireguard-profiles-on-gl-inet-routers/68837/7 "2026-05-20T03:13:04Z")

</div>



---

<div class="post-metadata">

**Author:** ![bruce](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bruce/32/35649_2.png) [@bruce](https://forum.gl-inet.com/u/bruce)\
**Post date:** [May 20, 2026, 3:13am UTC](https://forum.gl-inet.com/t/how-to-generate-and-import-nordvpn-wireguard-profiles-on-gl-inet-routers/68837/8 "2026-05-20T03:13:08Z")

</div>



---

<div class="post-metadata">

**Author:** ![SP-1200](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/sp-1200/32/31946_2.png) [@SP-1200](https://forum.gl-inet.com/u/SP-1200)\
**Post date:** [May 20, 2026, 6:10pm UTC](https://forum.gl-inet.com/t/how-to-generate-and-import-nordvpn-wireguard-profiles-on-gl-inet-routers/68837/9 "2026-05-20T18:10:01Z")

</div>

i use proton for my email, drive, passwords, etc. i did a similar setup like this to be able to use protonvpn on the mudi7 ( and the spitz 3000). seems to work well.

---

<div class="post-metadata">

**Author:** ![will.qiu](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/w/b38774/32.png) [@will.qiu](https://forum.gl-inet.com/u/will.qiu)\
**Post date:** [May 21, 2026, 9:04am UTC](https://forum.gl-inet.com/t/how-to-generate-and-import-nordvpn-wireguard-profiles-on-gl-inet-routers/68837/10 "2026-05-21T09:04:01Z")

</div>

Thank you for sharing your experience using ProtonVPN.

We also have some related documentation that may help users set up ProtonVPN:

- OpenVPN: [OpenVPN Client - GL.iNet Router Docs 4](https://docs.gl-inet.com/router/en/4/interface_guide/openvpn_client/#proton-vpn)
- WireGuard: [WireGuard Client - GL.iNet Router Docs 4](https://docs.gl-inet.com/router/en/4/interface_guide/wireguard_client/#set-up-wireguard-client-manually-for-other-providers)

---

<div class="post-metadata">

**Author:** ![bruce](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bruce/32/35649_2.png) [@bruce](https://forum.gl-inet.com/u/bruce)\
**Post date:** [August 12, 2026, 11:12am UTC](https://forum.gl-inet.com/t/how-to-generate-and-import-nordvpn-wireguard-profiles-on-gl-inet-routers/68837/12 "2026-08-12T11:12:53Z")

</div>


