How to get serial code?

diapolon · 2017-05-30T19:18:27.000Z

Hi at all!

i have a gl-ar300m. I’have a question: is possibile by terminal command get the serial code?

thank you

diapolon · 2017-06-06T17:48:21.000Z

it’s impossible?

glitch · 2017-06-06T19:50:20.000Z

Do they have one? It’s got a MAC - any good?

diapolon · 2017-06-06T23:55:30.000Z

the one on label under the device. Is it stored somewhere?

heavymetal · 2017-06-07T07:23:53.000Z

The serial is stored in the art partition in the flash.

You can read it using this command:
art=$(cat /proc/mtd | awk -F: ‘/art/{print $1}’) && dd if=/dev/$art bs=1 skip=$((0x30)) count=16 2>/dev/null && echo

diapolon · 2017-06-07T15:55:33.000Z

wery good work Heaymetal! thankyou

Txalamar · 2022-06-19T18:57:17.137Z

Hi,

is there a new in-memory location fort the S/N? The path stated by heavymetal does not work anymore with newer versions.

Thanks,

alzhao · 2022-06-23T10:05:24.603Z

Should not changed.
But it may depends on the models. The modem was for AR300M etc. What is your model?

jp-mandon · 2022-06-24T19:02:43.618Z

try this command:
cat /etc/config/glconfig | grep factory_sn