How to install NetBird package

[bruce]

Hi,

For the AX1800/Flint1, now I tested it can be supported and work fine, follow this to quick setup:

1. Upgrade the AX1800 to GL firmware v4.8.0 (or newer version)
2. Follow this tutorial to change the feed for AX1800:
   How to change the AX1800/AXT1800 plug-in feed to OpenWRT
3. Update the repo and install the netbird:

opkg update
opkg install netbird

4. Apply a SETUP_KEY from netbird, and copy it
   

   

5. Login the netbird in router:
   netbird login --setup-key <SETUP_KEY>
   

6. If it printed Logging successfully, means the netbird of this router added successfully, and then make netbird auto start-up:

/etc/init.d/netbird enable
/etc/init.d/netbird start
netbird up

7. Netbird dashboard shows the router is online:
   
   

-end

Kindly note:

1. AXT1800 (v4.8.0) is the same as AX1800 (v4.8.0), refer to the above all steps.
2. MT3000 (op24 firmware) and MT6000 (op24 firmware), since the GL feed has netbird, there is no need to change it, so please start the configuration directly from the third step.