How to upgrade Adguard on the Flint, auto and manual?

YOU2HOU · 2022-06-10T04:06:18.373Z

How to clean the old files? only 13m free space left after update ADH

melskie · 2022-06-12T07:19:40.810Z

Here’s how I manually update AdGuard Home on Flint by using WinSCP (SCP protocol):

Get the latest version on this link: Release AdGuard Home v0.107.17 · AdguardTeam/AdGuardHome · GitHub
(For Flint, it’s going to be the AdGuardHome_linux_armv7.tar.gz)
Download this file and extract it somewhere you prefer. You should have this folder extracted:
Open WinSCP and connect to the router’s IP: (default 192.168.8.1, make sure to change this if you change the LAN IP) and put in root as the username and your password. Make sure to select SCP as the File Protocol
Head to the folder /etc and you should see AdGuardHome there:
You’re gonna want to copy these folders as these are your backups for restoring your AG settings: agh-backup and data folders (paste it somewhere you prefer like, desktop)
Log into Flint’s router page and stop AdGuard Home process.
Now, copy the extracted file earlier downloaded from AdGuard’s Github to the router’s etc folder using WinSCP, you may drag the folder from your desktop going to the etc folder. and overwrite it.
Once done, copy and paste the 2 folders that were copied earlier (agh-backup and data) and paste it in etc/AdguardHome/ then overwrite it.
Head to AdGuard Home’s settings page and re-enable the AdGuard Home process then click on the Settings Page:

image1083×402 23.2 KB
Check the version on the bottom to see if it has been updated:

alannts425 · 2022-06-12T09:15:44.120Z

Great and awesome! I did it. How about Beryl? Same file as well?

melskie · 2022-06-12T10:34:12.117Z

Not sure about Beryl as I don’t have it with me. Based on this thread, it would be AdGuardHome_linux_mipsle_softfloat.tar.gz

Does GL-MT1300 Beryl support Adguard Home and GL Product questions? Technical Support for Routers

@kre you need install from Gl-iNet web UI AdGuardHome package and install gl-agh-stats too

alannts425 · 2022-06-12T10:37:51.614Z

I try to used same as the flint file but it’s not working the adguard home?

melskie · 2022-06-12T10:40:58.347Z

The file is different for Beryl. I posted a thread on my previous reply. You can try this file for Beryl: AdGuardHome_linux_mipsle_softfloat.tar.gz

alannts425 · 2022-06-12T10:46:48.223Z

Okay, noted with thanks.

alannts425 · 2022-06-12T12:04:39.676Z

Yes, great and awesome! I did it for my Beryl. Thanks so much for your kindness help.

AllenJ · 2022-07-06T20:51:47.181Z

I finally got the upgrade to work! I had run an upgrade a month earlier and it was still sitting in the backup folder. It seems that the AdGuard upgrade process would not overwrite the files in the backup folder, /etc/AdGuardHome/agh-backup. I was also running out of space to even add another .ovpn connection. I sshed in and manually deleted the AdGuardHome executable in the backup folder, and the upgrade worked just fine (I was also able to add another .ovpn connection) . The upgrade process also copies the old files to the backup folder, so once I’m satisfied the new version of AdGuardHome is working fine, I’ll delete the executable in the backup folder.

genki · 2023-01-21T01:31:27.235Z

Yep just tried this deleting the agh-backup files, and it worked.

Thanks AllenJ

Rotor · 2023-03-25T12:21:10.864Z

Successfully updated Flint, but for E750 Mudi I don’t know which file to download. The …linux_armv7.tar doesn’t work

Bitty_Bytes · 2023-03-25T17:41:10.794Z

I have AGH installed on my Spitz, but I don’t recall if the QCA9531 CPU (same as Mudi) used 32-bit mips or mips LE for the AGH install to /opts. For the mips_24kc, I’d try the 32-bit mips first (uname -m shows mips).

GitHub

Platforms

Network-wide ads & trackers blocking DNS server. Contribute to AdguardTeam/AdGuardHome development by creating an account on GitHub.

These commands from SSH work on a variety of platforms too to figure out the architecture.

opkg print-architecture

ubus call system board

uname -m

Rotor · 2023-03-26T03:26:14.545Z

Bitty_Bytes:

uname -m

Thanks, it is mips_24kc and 32-bit mips worked.

Rotor · 2023-07-20T19:30:45.988Z

The last time I used the following method and it worked: Auto upgrade

xNightHawkx · 2023-12-01T21:41:16.972Z

Is there an updated process for this? I did this on my new Flint 2 and everything broke. The adgaurd server would not start.

inteliboy · 2023-12-05T15:07:55.041Z

Perhaps you used wrong architecture for Flint 2. You should use https://github.com/AdguardTeam/AdGuardHome/releases/download/v0.107.41/AdGuardHome_linux_arm64.tar.gz.

bonez · 2024-03-04T07:27:48.192Z

Does anyone know the current method to upgrade AdGuardHome on a Flint 2 MT6000?
I tried doing it via the CLI (similar to the post I’m replying to, but did it directly in the console rather than using WinSCP).

I also grabbed the arm64.tar.gz rather than the arm7.tar.gz as the MT6000 is aarch64.

When I try to run the latest AdGuardHome executable it just returns “Segmentation Fault”.

Edit:

Using the ‘file’ command, here are the differences between the default version that is installed on the router (from Gl. Inet) compared to the arm64 version that I downloaded. The latter mentions FreeBSD.

root@router:/etc/AdGuardHome# file AdGuardHome 
**AdGuardHome: ELF 64-bit LSB executable, ARM aarch64, version 1 (SYSV), statically linked, Go BuildID=wwypSdlUcOiPO3WiW0fJ/66ksd_jrHc_v88FmVl9Z/-idAwYwJp0F3MPnu0GzEmmPd0, stripped**

root@router:/etc/AdGuardHome# cd /root/AdGuardHome/
root@router:~/AdGuardHome# file AdGuardHome
**AdGuardHome: ELF 64-bit LSB executable, ARM aarch64, version 1 (FreeBSD), statically linked, for FreeBSD 12.3, FreeBSD-style, Go BuildID=o-jIUFaXNqWcTxWF1KHG/5XX32XsYQy70XEiR3oWd14QAB/**PA1l4F9biDU3XWc-RDly, stripped
root@router:~/AdGuardHome#

admon · 2024-03-04T07:47:26.189Z

Adguard Home Upgrade VPN, DNS, Leaks

Hi guys, I am writing here a guide on how to upgrade Adguard Home but not all routers support even enough space storage. First, turn off Adguard Home on your router page. Second, have 2 options depending on what do you have a device? One option (very easy) if you have PC windows then download software call WinSCP [image] I set my default router is 192.168.0.1, so your IP router could default 192.168.8.1 Next open and edit the file on this address: /etc/init.d/adguardhome [image] and d…

This should do the trick.

bonez · 2024-03-04T09:33:58.741Z

admon:

This should do the trick.

Perfect, thanks! I didn’t think to check /etc/init.d, even though I could see with ps that it was running with --no-check-update

I’ve now upgraded successfully.

Earendil · 2024-03-04T13:00:26.137Z

Hi Admon,
do you know the reason why GL.iNet decided not expect to upgrade AdGuard?
With the described procedure it is very simple and and updated correctly.
…but that command line from GL-iNet will have provided it for some reason