# IoT issues on MT6000 Flint 2

**URL:** <https://forum.gl-inet.com/t/iot-issues-on-mt6000-flint-2/67296>\
**Category:** Router\
**Created:** [February 23, 2026, 6:50pm UTC](https://forum.gl-inet.com/t/iot-issues-on-mt6000-flint-2/67296 "2026-02-23T18:50:23Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![will.qiu](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/w/b38774/32.png) [@will.qiu](https://forum.gl-inet.com/u/will.qiu)\
**Post date:** [February 26, 2026, 8:02am UTC](https://forum.gl-inet.com/t/iot-issues-on-mt6000-flint-2/67296/2 "2026-02-26T08:02:54Z")

</div>

Hi

If you just want to create a new SSID for an IoT network on the MT6000, you can refer to the steps below—or wait for version 4.9, where IoT SSID support will be available directly in the GL UI.

> [@Create Add Multiple WiFis/Radios Configuration - MT6000 Flint2](https://forum.gl-inet.com/t/wifi-and-subnet-configuration-help-mt6000-flint2/51254/2):
>
> GL GUI -\> Network -\> Guest network, here can change the subnet IP. The 'br-guest' is hard code. It's not sense and cannot feasible, unless manually custom add a route rule. Add new SSID WiFi for MT6000 (v4.8.3, stable), on the SSH: #Notes: #1. Add 2 new subnets: "br-iot" and "br-custom", with isolation between br-lan. #2. Add separate 2.4 GHz and 5 GHz Wi‑Fi radios for the "iot" and "custom" network. #3. The "From-Specified Connection Types" in the VPN policy mode, support d…

* * *

However, if you need to use it together with other APs (including another MT6000) while maintaining the separation and characteristics of LAN, Guest, and IoT Wi-Fi networks, the overall setup becomes quite complex.

You’ll need to configure VLANs on the main router/AP for LAN, Guest, and IoT, along with firewall rules to keep devices of Guest and IoT isolated.

Below are some examples from other models/firmware versions with similar requirements that you can use as a reference.

> [@Flint 3 (GL-BE9300) as AP behind pfSense: multiple SSIDs -\> VLAN + Random BSSID](https://forum.gl-inet.com/t/flint-3-gl-be9300-as-ap-behind-pfsense-multiple-ssids-vlan-random-bssid/66719/4):
>
> Hi Well, overall your requirements are feasible. However, the configuration will be quite complex, and it requires you to have sufficient knowledge of networking concepts as well as a solid understanding of LuCI/UCI. Below is a configuration example. Since the steps for Work and IoT are repetitive, only Main / Guest / IoT are used as examples here. Topology is as follows: Configuration steps: Start from a factory-default BE9300 v4.8.3 configuration Configure its WAN port as …

> [@AP Isolation for Guest isn't working](https://forum.gl-inet.com/t/ap-isolation-for-guest-isnt-working/66700/2):
>
> Hi, The AP Isolation function only applies to devices on the Guest Wi-Fi. If you have added Ethernet (ETH) ports to the Guest network, this isolation will not be effective for those wired devices. Furthermore, if you wish to implement isolation that includes Ethernet ports, you must manually add nft (nftables) rules to block forwarding at the bridge level, rather than at the IP level where firewall rules are typically created in Luci.

---

_[View the full topic](https://forum.gl-inet.com/t/iot-issues-on-mt6000-flint-2/67296)._
