# IPv6 on custom VLAN in v4.11

**URL:** <https://forum.gl-inet.com/t/ipv6-on-custom-vlan-in-v4-11/73016>\
**Category:** Router\
**Created:** [November 19, 2026, 8:30pm UTC](https://forum.gl-inet.com/t/ipv6-on-custom-vlan-in-v4-11/73016 "2026-11-19T20:30:28Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![978rhvbn\_L](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/9/22d042/32.png) [@978rhvbn\_L](https://forum.gl-inet.com/u/978rhvbn_L)\
**Post date:** [November 19, 2026, 8:30pm UTC](https://forum.gl-inet.com/t/ipv6-on-custom-vlan-in-v4-11/73016/1 "2026-11-19T20:30:28Z")

</div>

How do you add IPv6 to a VLAN in v4.11? IPv6 seems to only take effect on the LAN and the Guest networks. If it’s not possible, could it be considered to add IPv6 to VLANs? Thanks.

---

<div class="post-metadata">

**Author:** ![charles2](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/c/9dc877/32.png) [@charles2](https://forum.gl-inet.com/u/charles2)\
**Post date:** [November 20, 2026, 10:45am UTC](https://forum.gl-inet.com/t/ipv6-on-custom-vlan-in-v4-11/73016/3 "2026-11-20T10:45:07Z")

</div>

Hi,

You can configure IPv6 for your existing VLAN in LuCI so that connected devices receive an address automatically.

1. In the GL.iNet web panel, open **System → Advanced Settings → LuCI** , then go to **Network → Interfaces** and click **Edit** next to your custom VLAN.  
Under **Advanced Settings** , set **IPv6 assignment length** to `64` and enter an unused subnet ID in **IPv6 assignment hint**.  

2. For local IPv6 addresses, select **local (Local ULA)** under **IPv6 prefix filter**.  
If you want clients to receive public IPv6 addresses, first check that your upstream router or ISP has delegated a prefix (IPv6-PD), then select the corresponding upstream prefix class.

3. Under **DHCP Server → IPv6 Settings** , set **RA-Service** and **DHCPv6-Service** to **server mode** , then open **IPv6 RA Settings** and check **Enable SLAAC**.  

4. Click **Save & Apply** , reconnect a device to the VLAN, and check that its IPv6 address matches the `/64` prefix shown on the VLAN interface.
