L2tp Ipsec psk and other questions

leone88 · 2018-11-26T06:50:38.667Z

Hi everyone. Thanks for the forum.

I have a problem.

I have to use this configuration:

Gl. Inet GL-MT300N-V2 (or GL-AR300M16?) + modem USB with sim (it’s OK Alcatel IK40V-2BALIT1 ? 4G-LTE )
Normal Tplink connected to gli. Inet via Wan with ethernet, after tplink give at home internet with ethernet and wifi.

Now. I have read many articles on the internet but everyone says different ways. Or say how to do ipsec server.

While I only need L2tp Ipsec / psk Client on my gl.inet

I have this data to access the server:

L2TP IPSEC PSK
Server address
Precompiled key
User
Password

Is all this feasible? What I do?

I did the tests on the L2tp ipsec/psk server with my Android smartphone and it reaches 60mb / s. Can gl.inet reach this speed or have limits?

Thanks a lot

alzhao · 2018-11-28T08:11:52.097Z

Unfortunately L2TP via IPsec is not working good on the router. Even it works the speed will be several Mbps only.

We suggest you to use OpenVpn or wireguard.

leone88 · 2018-11-28T14:14:47.394Z

Ok thanks.

But L2tp is faster than openvpn…

Johnex · 2018-11-28T21:36:13.410Z

And wireguard is faster and more secure than L2tp

You can check benchmarks here:

alzhao · 2018-11-29T00:33:03.473Z

With IPSec, L2TP will be no faster.

leone88 · 2018-11-29T07:34:37.302Z

Yes. But I need L2tp. Which router do you recommend? Or what is the best economic solution to use L2tp?

Thanks so much

alzhao · 2018-11-29T15:41:06.404Z

If only l2tp you can use any router. You can set up in luci. Just no IPSec.

leone88 · 2018-11-29T19:40:43.266Z

Please. Is there a guide about it? On routers gl. Inet? Thank you

alzhao · 2018-11-30T05:59:48.672Z

Luci->network->interfaces

Then go to WAN and edit

zurapa · 2020-01-11T17:11:09.077Z

Man! I recomen MikroTik. L2TP/IPsec client wokr very very stable!