# Looking for a proxy solution

**URL:** <https://forum.gl-inet.com/t/looking-for-a-proxy-solution/2571>\
**Category:** Router\
**Created:** [January 5, 2018, 6:24am UTC](https://forum.gl-inet.com/t/looking-for-a-proxy-solution/2571 "2018-01-05T06:24:10Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![droidvideo](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/d/bc8723/32.png) [@droidvideo](https://forum.gl-inet.com/u/droidvideo)\
**Post date:** [January 5, 2018, 6:24am UTC](https://forum.gl-inet.com/t/looking-for-a-proxy-solution/2571/1 "2018-01-05T06:24:10Z")

</div>

I have AR300M connected to our network at work using cable (i.e. RJ45 from WAN port of AR300 to a network port in the wall here). I have a WiFi AP setup on AR300 called “My Test”. Our work network has a proxy that requires authentication. Basically I need to provide proxy configuration in WiFI clients along with user id and password. Then I am able to browse internet.

I am wondering if there is a way to do this transparently on AR300 so that its WiFi clients get internet access without having to configure proxy.

I am aware of cntlm proxy ([http://cntlm.sourceforge.net/](http://cntlm.sourceforge.net/)) that can be configured with a user id and a hash which acts as a proxy to clients, but does authentication with main proxy on clients behalf using the configured credentials. The client pcs still have to set their http/https proxy to the PC where cntlm proxy is running. I am looking for a way that doesn’t need any kind of proxy configuration on client PCs.

Thanks

---

<div class="post-metadata">

**Author:** ![tomsmith842](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/tomsmith842/32/262_2.png) [@tomsmith842](https://forum.gl-inet.com/u/tomsmith842)\
**Post date:** [January 5, 2018, 10:01am UTC](https://forum.gl-inet.com/t/looking-for-a-proxy-solution/2571/2 "2018-01-05T10:01:13Z")

</div>

**some pcs look for automatic proxy config proxy.pac or wpad.dat**

so you could config dnsmasq to point the needful domain to router

then host the proxy config file on router web server

---

<div class="post-metadata">

**Author:** ![droidvideo](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/d/bc8723/32.png) [@droidvideo](https://forum.gl-inet.com/u/droidvideo)\
**Post date:** [January 5, 2018, 10:50am UTC](https://forum.gl-inet.com/t/looking-for-a-proxy-solution/2571/3 "2018-01-05T10:50:57Z")

</div>

I am looking for transparent proxy solution so that the PC or device using this router be able to access internet without any configuration.

This is the best link I have found so far that talks about a way of doing this using iptable rules and tinyproxy.

> **[Setting up a transparent pass-through proxy with iptables](https://www.phinfinity.com/2012/09/setting-up-a-transparent-pass-through-proxy-with-iptables.html)**
>
> Update: Part 2 for https posted in separate post! So for a very long now I’ve had a nagging issue with proxies. My primary source of int...

&nbsp;

tinyproxy doesn’t have support for proxies that require authentication. I would rather use cntlm proxy for this.

I am wondering if there is a port of cntlm that runs on Ar300M platform.

&nbsp;

Thanks

&nbsp;

---

<div class="post-metadata">

**Author:** ![droidvideo](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/d/bc8723/32.png) [@droidvideo](https://forum.gl-inet.com/u/droidvideo)\
**Post date:** [January 9, 2018, 4:09am UTC](https://forum.gl-inet.com/t/looking-for-a-proxy-solution/2571/4 "2018-01-09T04:09:04Z")

</div>

I ended up installing squid and configured it to use upstream proxy with credentials. It seems to be working fine if I configure each client to use proxy at 192.168.8.1:3128 port.

I am still looking into configuring squid to work as a transparent proxy.

---

<div class="post-metadata">

**Author:** ![tomsmith842](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/tomsmith842/32/262_2.png) [@tomsmith842](https://forum.gl-inet.com/u/tomsmith842)\
**Post date:** [January 10, 2018, 12:15pm UTC](https://forum.gl-inet.com/t/looking-for-a-proxy-solution/2571/5 "2018-01-10T12:15:44Z")

</div>

thanks for the update, good to know

---

<div class="post-metadata">

**Author:** ![bruce](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bruce/32/35649_2.png) [@bruce](https://forum.gl-inet.com/u/bruce)\
**Post date:** [October 29, 2025, 2:37am UTC](https://forum.gl-inet.com/t/looking-for-a-proxy-solution/2571/6 "2025-10-29T02:37:05Z")

</div>


