I could only get some logs, 750 below
Note the date is wrong
note: I had to do several resets just to get ssh access; root had to be set no password
[
0.000000] Linux version 4.9.120 (lancer@gl-inet) (gcc version 7.3.0
(OpenWrt GCC 7.3.0 r7258-5eb055306f) ) #0 Thu Aug 16 07:51:15 2018
[ 0.000000] MyLoader: sysp=5109ef65, boardp=af7d6fff, parts=cfbfd1dd
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
[ 0.000000] SoC: Qualcomm Atheros QCA9533 ver 2 rev 0
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 08000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32
bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases,
linesize 32 bytes
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Initmem setup node 0 [mem
0x0000000000000000-0x0000000007ffffff]
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat 804dd0f4, node_mem_map
81000020
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32768 pages, LIFO batch:7
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 32512
[ 0.000000] Kernel command line: board=GL-AR750
mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(art)ro,-(firmware)
console=ttyS0,115200 rootfstype=squashfs noinitrd
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536
bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768
bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 124352K/131072K available (3533K kernel code,
182K rwdata, 884K rodata, 320K init, 220K bss, 6720K reserved, 0K
cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1,
Nodes=1
[ 0.000000] NR_IRQS:51
[ 0.000000] Clocks: CPU:650.000MHz, DDR:597.387MHz, AHB:216.666MHz,
Ref:25.000MHz
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 5880801374 ns
[ 0.000008] sched_clock: 32 bits at 325MHz, resolution 3ns, wraps
every 6607641598ns
[ 0.008243] Calibrating delay loop... 432.53 BogoMIPS (lpj=2162688)
[ 0.071099] pid_max: default: 32768 minimum: 301
[ 0.076078] Mount-cache hash table entries: 1024 (order: 0, 4096
bytes)
[ 0.083055] Mountpoint-cache hash table entries: 1024 (order: 0, 4096
bytes)
[ 0.093215] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.103603] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.111235] NET: Registered protocol family 16
[ 0.117409] MIPS: machine is GL.iNet GL-AR750
[ 0.604478] registering PCI controller with io_map_base unset
[ 0.627658] usbcore: registered new interface driver usbfs
[ 0.633560] usbcore: registered new interface driver hub
[ 0.639223] usbcore: registered new device driver usb
[ 0.644760] i2c-gpio i2c-gpio.0: using pins 17 (SDA) and 16 (SCL)
[ 0.651407] PCI host bridge to bus 0000:00
[ 0.655767] pci_bus 0000:00: root bus resource [mem
0x10000000-0x11ffffff]
[ 0.663004] pci_bus 0000:00: root bus resource [io 0x0000]
[ 0.668878] pci_bus 0000:00: root bus resource [??? 0x00000000 flags
0x0]
[ 0.676026] pci_bus 0000:00: No busn resource found for root bus,
will use [bus 00-ff]
[ 0.684406] pci 0000:00:00.0: [168c:0050] type 00 class 0x028000
[ 0.684416] pci 0000:00:00.0: invalid calibration data
[ 0.689855] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x001fffff
64bit]
[ 0.689909] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff
pref]
[ 0.689979] pci 0000:00:00.0: supports D1
[ 0.689988] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.690178] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to
00
[ 0.690206] pci 0000:00:00.0: BAR 0: assigned [mem
0x10000000-0x101fffff 64bit]
[ 0.697956] pci 0000:00:00.0: BAR 6: assigned [mem
0x10200000-0x1020ffff pref]
[ 0.705571] pci 0000:00:00.0: using irq 40 for pin 1
[ 0.714623] clocksource: Switched to clocksource MIPS
[ 0.721019] NET: Registered protocol family 2
[ 0.726513] TCP established hash table entries: 1024 (order: 0, 4096
bytes)
[ 0.733867] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.740619] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.747427] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.753595] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.760477] NET: Registered protocol family 1
[ 0.765141] PCI: CLS 0 bytes, default 32
[ 0.767805] Crashlog allocated RAM at address 0x3f00000
[ 0.774358] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[ 0.788137] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.794282] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME)
(CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.813530] io scheduler noop registered
[ 0.817719] io scheduler deadline registered (default)
[ 0.823532] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.832688] console [ttyS0] disabled
[ 0.856603] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11,
base_baud = 1562500) is a 16550A
[ 0.865710] console [ttyS0] enabled
[ 0.873253] bootconsole [early0] disabled
[ 0.887744] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.894213] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.899512] 4 cmdlinepart partitions found on MTD device spi0.0
[ 0.905627] Creating 4 MTD partitions on "spi0.0":
[ 0.910580] 0x000000000000-0x000000040000 : "u-boot"
[ 0.917561] 0x000000040000-0x000000050000 : "u-boot-env"
[ 0.925008] 0x000000050000-0x000000060000 : "art"
[ 0.931775] 0x000000060000-0x000001000000 : "firmware"
[ 0.960949] 2 uimage-fw partitions found on MTD device firmware
[ 0.967108] 0x000000060000-0x0000001e0000 : "kernel"
[ 0.973589] 0x0000001e0000-0x000001000000 : "rootfs"
[ 0.980355] mtd: device 5 (rootfs) set to be root filesystem
[ 0.986296] 1 squashfs-split partitions found on MTD device rootfs
[ 0.992683] 0x000000c10000-0x000001000000 : "rootfs_data"
[ 1.001238] libphy: Fixed MDIO Bus: probed
[ 1.028165] libphy: ag71xx_mdio: probed
[ 1.657557] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04
[uid=004dd042, driver=Generic PHY]
[ 1.667668] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[ 2.297168] ag71xx-mdio.1: Found an AR934X built-in switch
[ 2.350473] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
[ 2.356998] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
Driver
[ 2.363740] ehci-pci: EHCI PCI platform driver
[ 2.368535] usbcore: registered new interface driver usbtest
[ 2.374433] usbcore: registered new interface driver usb_ehset_test
[ 2.380996] usbcore: registered new interface driver lvs
[ 2.387973] NET: Registered protocol family 10
[ 2.396906] NET: Registered protocol family 17
[ 2.401555] bridge: filtering via arp/ip/ip6tables is no longer
available by default. Update your scripts to load br_netfilter if you
need this.
[ 2.415074] 8021q: 802.1Q VLAN Support v1.8
[ 2.421141] hctosys: unable to open rtc device (rtc0)
[ 2.431552] VFS: Mounted root (squashfs filesystem) readonly on
device 31:5.
[ 2.440623] Freeing unused kernel memory: 320K
[ 2.445242] This architecture does not have kernel memory protection.
[ 2.564641] random: fast init done
[ 3.069059] init: Console is alive
[ 3.072779] init: - watchdog -
[ 5.139144] kmodloader: loading kernel modules from
/etc/modules-boot.d/*
[ 5.311901] exFAT: Version 1.2.9
[ 5.352980] SCSI subsystem initialized
[ 5.361963] ehci-platform: EHCI generic platform driver
[ 5.367517] ehci-platform ehci-platform: EHCI Host Controller
[ 5.373635] ehci-platform ehci-platform: new USB bus registered,
assigned bus number 1
[ 5.383961] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[ 5.414662] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[ 5.421347] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002
[ 5.428392] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 5.435865] usb usb1: Product: EHCI Host Controller
[ 5.440904] usb usb1: Manufacturer: Linux 4.9.120 ehci_hcd
[ 5.446582] usb usb1: SerialNumber: ehci-platform
[ 5.452247] hub 1-0:1.0: USB hub found
[ 5.456427] hub 1-0:1.0: 1 port detected
[ 5.463397] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.471315] ohci-platform: OHCI generic platform driver
[ 5.479214] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.490098] usbcore: registered new interface driver usb-storage
[ 5.498344] usbcore: registered new interface driver uas
[ 5.504501] kmodloader: done loading kernel modules from
/etc/modules-boot.d/*
[ 5.522441] init: - preinit -
[ 6.059398] usb 1-1: new high-speed USB device number 2 using
ehci-platform
[ 6.266621] usb 1-1: New USB device found, idVendor=05e3,
idProduct=0618
[ 6.273570] usb 1-1: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 6.280987] usb 1-1: Product: USB2.0 Hub
[ 6.345322] hub 1-1:1.0: USB hub found
[ 6.349686] hub 1-1:1.0: 4 ports detected
[ 6.473037] random: procd: uninitialized urandom read (4 bytes read)
[ 6.862215] usb 1-1.1: new high-speed USB device number 3 using
ehci-platform
[ 6.922884] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 7.018985] usb 1-1.1: New USB device found, idVendor=05e3,
idProduct=0752
[ 7.026133] usb 1-1.1: New USB device strings: Mfr=3, Product=4,
SerialNumber=0
[ 7.033684] usb 1-1.1: Product: USB Storage
[ 7.038029] usb 1-1.1: Manufacturer: Generic
[ 7.044214] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[ 7.051626] scsi host0: usb-storage 1-1.1:1.0
[ 8.116366] scsi 0:0:0:0: Direct-Access Generic STORAGE DEVICE
0233 PQ: 0 ANSI: 0
[ 8.130029] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 8.566403] eth1: link up (1000Mbps/Full duplex)
[ 8.571198] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 10.199035] jffs2: notice: (481) jffs2_build_xattr_subsystem:
complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan)
and 0 of xref (0 dead, 0 orphan) found.
[ 10.216981] mount_root: switching to jffs2 overlay
[ 10.402751] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 10.572270] eth1: link down
[ 10.586853] procd: - early -
[ 10.589930] procd: - watchdog -
[ 11.257434] procd: - watchdog -
[ 11.260908] procd: - ubus -
[ 11.592711] random: jshn: uninitialized urandom read (4 bytes read)
[ 11.607136] random: ubusd: uninitialized urandom read (4 bytes read)
[ 11.855204] random: ubusd: uninitialized urandom read (4 bytes read)
[ 11.863613] procd: - init -
[ 13.452697] kmodloader: loading kernel modules from /etc/modules.d/*
[ 13.490948] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[ 13.524368] tun: Universal TUN/TAP device driver, 1.6
[ 13.529651] tun: (C) 1999-2004 Max Krasnyansky
<maxk@qualcomm.com>
[ 13.570930] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 13.603795] Netfilter messages via NETLINK v0.30.
[ 13.627339] ip_set: protocol 6
[ 13.727748] u32 classifier
[ 13.730549] input device check on
[ 13.734328] Actions configured
[ 13.757191] Mirror/redirect action on
[ 13.783918] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
[ 13.863194] fuse init (API version 7.26)
[ 13.890879] usbcore: registered new interface driver cdc_acm
[ 13.896790] cdc_acm: USB Abstract Control Model driver for USB modems
and ISDN adapters
[ 13.922800] usbcore: registered new interface driver cdc_wdm
[ 13.946306] Loading modules backported from Linux version
wt-2017-11-01-0-gfe248fc2c180
[ 13.954576] Backport generated by backports.git
v4.14-rc2-1-31-g86cf0e5d
[ 13.980748] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 13.994963] usbcore: registered new interface driver ipheth
[ 14.164532] ctnetlink v0.93: registering with nfnetlink.
[ 14.399395] usbcore: registered new interface driver usbserial
[ 14.405573] usbcore: registered new interface driver
usbserial_generic
[ 14.412397] usbserial: USB Serial support registered for generic
[ 14.461395] wireguard: WireGuard 0.0.20181119 loaded. See
www.wireguard.com for information.
[ 14.470174] wireguard: Copyright (C) 2015-2018 Jason A. Donenfeld
<Jason@zx2c4.com>. All Rights Reserved.
[ 14.590197] xt_time: kernel timezone is -0000
[ 14.603605] usbcore: registered new interface driver cdc_ether
[ 14.617736] usbcore: registered new interface driver cdc_ncm
[ 14.926255] usbcore: registered new interface driver cp210x
[ 14.932094] usbserial: USB Serial support registered for cp210x
[ 14.955834] usbcore: registered new interface driver huawei_cdc_ncm
[ 15.080792] PPP generic driver version 2.4.2
[ 15.106307] PPP MPPE Compression module registered
[ 15.113295] NET: Registered protocol family 24
[ 15.126859] usbcore: registered new interface driver qmi_wwan
[ 15.147276] usbcore: registered new interface driver rndis_host
[ 15.196191] usbcore: registered new interface driver sierra
[ 15.202029] usbserial: USB Serial support registered for Sierra USB
modem
[ 15.226835] usbcore: registered new interface driver sierra_net
[ 15.305708] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 15.311727] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1
irq_mode 0 reset_mode 0
[ 15.637298] ath10k_pci 0000:00:00.0: Direct firmware load for
ath10k/pre-cal-pci-0000:00:00.0.bin failed with error -2
[ 15.648387] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 23.352719] firmware ath10k!pre-cal-pci-0000:00:00.0.bin:
firmware_loading_store: map pages failed
[ 23.440032] ath10k_pci 0000:00:00.0: Direct firmware load for
ath10k/QCA9887/hw1.0/firmware-6.bin failed with error -2
[ 23.451137] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 23.711041] firmware ath10k!QCA9887!hw1.0!firmware-6.bin:
firmware_loading_store: map pages failed
[ 23.924197] ath10k_pci 0000:00:00.0: qca9887 hw1.0 target 0x4100016d
chip_id 0x004000ff sub 0000:0000
[ 23.933784] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1
tracing 0 dfs 1 testmode 1
[ 23.947722] ath10k_pci 0000:00:00.0: firmware ver 10.2.4-1.0-00033
api 5 features no-p2p,ignore-otp,skip-clock-init,mfp,allows-mesh-bcast
crc32 c232a0c3
[ 23.994605] ath10k_pci 0000:00:00.0: Direct firmware load for
ath10k/QCA9887/hw1.0/board-2.bin failed with error -2
[ 24.005413] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 24.084303] firmware ath10k!QCA9887!hw1.0!board-2.bin:
firmware_loading_store: map pages failed
[ 24.110879] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A
crc32 546cca0d
[ 25.175314] ath10k_pci 0000:00:00.0: htt-ver 2.1 wmi-op 5 htt-op 2
cal file max-sta 128 raw 0 hwcrypto 1
[ 25.316171] ath: EEPROM regdomain: 0x0
[ 25.316179] ath: EEPROM indicates default country code should be used
[ 25.316182] ath: doing EEPROM country->regdmn map search
[ 25.316193] ath: country maps to regdmn code: 0x3a
[ 25.316198] ath: Country alpha2 being used: US
[ 25.316201] ath: Regpair used: 0x3a
[ 25.421707] usbcore: registered new interface driver option
[ 25.427622] usbserial: USB Serial support registered for GSM modem
(1-port)
[ 25.455612] usbcore: registered new interface driver rt2800usb
[ 25.553093] ath: EEPROM regdomain: 0x0
[ 25.553102] ath: EEPROM indicates default country code should be used
[ 25.553106] ath: doing EEPROM country->regdmn map search
[ 25.553120] ath: country maps to regdmn code: 0x3a
[ 25.553125] ath: Country alpha2 being used: US
[ 25.553128] ath: Regpair used: 0x3a
[ 25.564006] ieee80211 phy1: Selected rate control algorithm
'minstrel_ht'
[ 25.568192] ieee80211 phy1: Atheros AR9531 Rev:2 mem=0xb8100000,
irq=47
[ 25.582508] kmodloader: done loading kernel modules from
/etc/modules.d/*
[ 41.476252] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 41.497526] br-lan: port 1(eth1.1) entered blocking state
[ 41.503112] br-lan: port 1(eth1.1) entered disabled state
[ 41.509109] device eth1.1 entered promiscuous mode
[ 41.514065] device eth1 entered promiscuous mode
[ 41.561267] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 41.601619] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 43.116472] eth1: link up (1000Mbps/Full duplex)
[ 43.121280] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 43.184788] br-lan: port 1(eth1.1) entered blocking state
[ 43.190379] br-lan: port 1(eth1.1) entered forwarding state
[ 43.260500] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 47.192598] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 47.278628] br-lan: port 2(wlan1) entered blocking state
[ 47.284130] br-lan: port 2(wlan1) entered disabled state
[ 47.290065] device wlan1 entered promiscuous mode
[ 47.295037] br-lan: port 2(wlan1) entered blocking state
[ 47.300526] br-lan: port 2(wlan1) entered forwarding state
[ 47.475448] br-lan: port 2(wlan1) entered disabled state
[ 52.343291] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 52.371682] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 52.378464] br-lan: port 2(wlan1) entered blocking state
[ 52.383955] br-lan: port 2(wlan1) entered forwarding state
[ 52.408877] br-lan: port 3(wlan0) entered blocking state
[ 52.414375] br-lan: port 3(wlan0) entered disabled state
[ 52.420319] device wlan0 entered promiscuous mode
[ 54.315091] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 54.321881] br-lan: port 3(wlan0) entered blocking state
[ 54.327443] br-lan: port 3(wlan0) entered forwarding state
[ 54.406606] eth0: link up (10Mbps/Full duplex)
[ 54.442064] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 56.516748] eth0: link down
[ 69.363036] device wlan1 left promiscuous mode
[ 69.367834] br-lan: port 2(wlan1) entered disabled state
[ 69.378610] device wlan0 left promiscuous mode
[ 69.383319] br-lan: port 3(wlan0) entered disabled state
[ 70.278286] eth0: link up (10Mbps/Full duplex)
[ 72.014049] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 73.170378] eth0: link down
[ 73.367519] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 73.374058] br-lan: port 2(wlan1) entered blocking state
[ 73.379610] br-lan: port 2(wlan1) entered disabled state
[ 73.385511] device wlan1 entered promiscuous mode
[ 73.438616] br-lan: port 3(wlan0) entered blocking state
[ 73.444113] br-lan: port 3(wlan0) entered disabled state
[ 73.450077] device wlan0 entered promiscuous mode
[ 75.074737] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 75.081493] br-lan: port 2(wlan1) entered blocking state
[ 75.087032] br-lan: port 2(wlan1) entered forwarding state
[ 75.764860] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 75.771620] br-lan: port 3(wlan0) entered blocking state
[ 75.777179] br-lan: port 3(wlan0) entered forwarding state
[ 81.516044] random: crng init done
[ 81.519578] random: 6 urandom warning(s) missed due to ratelimiting
[ 85.638209] eth0: link up (10Mbps/Full duplex)
[ 87.716716] eth0: link down
[ 101.238277] eth0: link up (10Mbps/Full duplex)
[ 103.316709] eth0: link down
[ 116.838219] eth0: link up (10Mbps/Full duplex)
[ 118.916721] eth0: link down
[ 132.438197] eth0: link up (10Mbps/Full duplex)
[ 134.516708] eth0: link down
[ 148.038198] eth0: link up (10Mbps/Full duplex)
[ 150.116883] eth0: link down
[ 163.638203] eth0: link up (10Mbps/Full duplex)
[ 165.716716] eth0: link down
[ 179.238211] eth0: link up (10Mbps/Full duplex)
[ 181.316706] eth0: link down
[ 194.838195] eth0: link up (10Mbps/Full duplex)
[ 196.916713] eth0: link down
[ 210.438197] eth0: link up (10Mbps/Full duplex)
[ 212.516710] eth0: link down
[ 226.038225] eth0: link up (10Mbps/Full duplex)
[ 228.116735] eth0: link down
[ 241.638319] eth0: link up (10Mbps/Full duplex)
[ 243.716709] eth0: link down
[ 257.238209] eth0: link up (10Mbps/Full duplex)
[ 259.316711] eth0: link down
[ 272.838188] eth0: link up (10Mbps/Full duplex)
[ 274.916716] eth0: link down
[ 288.438183] eth0: link up (10Mbps/Full duplex)
[ 290.516725] eth0: link down
[ 304.038193] eth0: link up (10Mbps/Full duplex)
[ 306.116712] eth0: link down
[ 319.638188] eth0: link up (10Mbps/Full duplex)
[ 321.716695] eth0: link down
[ 335.238186] eth0: link up (10Mbps/Full duplex)
[ 337.316708] eth0: link down
[ 350.838191] eth0: link up (10Mbps/Full duplex)
[ 352.916698] eth0: link down
[ 366.598190] eth0: link up (10Mbps/Full duplex)
[ 368.676702] eth0: link down