# Lost mesh and Luci after 3.211 firmware update (GL-B1300) **URL:** \ **Category:** Router\ **Created:** [January 31, 2022, 12:57am UTC](https://forum.gl-inet.com/t/lost-mesh-and-luci-after-3-211-firmware-update-gl-b1300/19866 "2022-01-31T00:57:42Z")\ **Posts on this page:** 11\ **Page:** 1
**Author:** ![stavol](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/s/ecb155/32.png) [@stavol](https://forum.gl-inet.com/u/stavol)\ **Post date:** [January 31, 2022, 12:57am UTC](https://forum.gl-inet.com/t/lost-mesh-and-luci-after-3-211-firmware-update-gl-b1300/19866/1 "2022-01-31T00:57:42Z")
Hi, I’ve just upgraded the firmware to 3.211. I have three meshed B1300s, but now they’re no longer meshed. ![image](https://forum-static.gl-inet.com/original/2X/f/fb54a9664e3313956557694cfd4ec4713b5b3e71.png) I now also lost Luci. ![image](https://forum-static.gl-inet.com/original/2X/5/56dd8a3565ae06f7f55a4f2e4a828b634f4c3ac7.png) ---
**Author:** ![stavol](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/s/ecb155/32.png) [@stavol](https://forum.gl-inet.com/u/stavol)\ **Post date:** [February 1, 2022, 12:51am UTC](https://forum.gl-inet.com/t/lost-mesh-and-luci-after-3-211-firmware-update-gl-b1300/19866/2 "2022-02-01T00:51:43Z")
Has no one else encountered the same issue? In that case, I wonder what I did wrong… ---
**Author:** ![wcs2228](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/wcs2228/32/6112_2.png) [@wcs2228](https://forum.gl-inet.com/u/wcs2228)\ **Post date:** [February 1, 2022, 2:27am UTC](https://forum.gl-inet.com/t/lost-mesh-and-luci-after-3-211-firmware-update-gl-b1300/19866/3 "2022-02-01T02:27:25Z")
You can install LuCI again by clicking on the button. GL.iNet did not include it in the firmware. You may have redo the mesh. ---
**Author:** ![stavol](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/s/ecb155/32.png) [@stavol](https://forum.gl-inet.com/u/stavol)\ **Post date:** [February 3, 2022, 3:21am UTC](https://forum.gl-inet.com/t/lost-mesh-and-luci-after-3-211-firmware-update-gl-b1300/19866/4 "2022-02-03T03:21:29Z")
Thanks, I didn’t know that LuCI is no longer included in the firmware. I’ve also reset all of my B1300s, but they still won’t mesh with each other ☹ The mesh LED would just blink and nothing happens. ---
**Author:** ![wcs2228](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/wcs2228/32/6112_2.png) [@wcs2228](https://forum.gl-inet.com/u/wcs2228)\ **Post date:** [February 5, 2022, 1:13am UTC](https://forum.gl-inet.com/t/lost-mesh-and-luci-after-3-211-firmware-update-gl-b1300/19866/6 "2022-02-05T01:13:05Z")
You can try reinstalling the previous firmware version. ---
**Author:** ![limbot](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/limbot/32/1267_2.png) [@limbot](https://forum.gl-inet.com/u/limbot)\ **Post date:** [February 5, 2022, 2:10am UTC](https://forum.gl-inet.com/t/lost-mesh-and-luci-after-3-211-firmware-update-gl-b1300/19866/7 "2022-02-05T02:10:36Z")
I recently did a new mesh with 3.211 beta 6 on an S1300 (master) with 2 B1300 slaves. Don’t know if this assists: > [@B1300 Mesh setup](https://forum.gl-inet.com/t/b1300-mesh-setup/7961): > > Ok, when I first got a couple of B1300s I had a lot of [problems](https://forum.gl-inet.com/t/b1300-mesh-issues/7380) getting the mesh setup. I recently ended up getting a third node for a bit more coverage and maybe took a bit more time to set it up. In the end, I think all the initial issues I had with the mesh was basically just being too impatient. Instead of waiting for things to setup I’d go “it’s not working” and reset everything. The third node connected first time. Keep in mind too this post [here](https://forum.gl-inet.com/t/hints-tips-b1300-and-maybe-s1300-web-access-slave-mesh-mode-and-goodcloud) Here’s my Amazon review that’s waiting… ---
**Author:** ![alzhao](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/a/5f9b8f/32.png) [@alzhao](https://forum.gl-inet.com/u/alzhao)\ **Post date:** [February 5, 2022, 3:25am UTC](https://forum.gl-inet.com/t/lost-mesh-and-luci-after-3-211-firmware-update-gl-b1300/19866/8 "2022-02-05T03:25:02Z")
I tested and mesh works. It just takes exteremely long to build the mesh. ---
**Author:** ![stavol](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/s/ecb155/32.png) [@stavol](https://forum.gl-inet.com/u/stavol)\ **Post date:** [February 6, 2022, 2:58pm UTC](https://forum.gl-inet.com/t/lost-mesh-and-luci-after-3-211-firmware-update-gl-b1300/19866/9 "2022-02-06T14:58:31Z")
I don’t know what I’ve done wrong, but I still can’t mesh all three. Will it help the mesh process if I connect the routers with lan cable? Thank you ---
**Author:** ![alzhao](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/a/5f9b8f/32.png) [@alzhao](https://forum.gl-inet.com/u/alzhao)\ **Post date:** [February 7, 2022, 4:16am UTC](https://forum.gl-inet.com/t/lost-mesh-and-luci-after-3-211-firmware-update-gl-b1300/19866/10 "2022-02-07T04:16:31Z")
You’d better not connect lan cable. Main node: Cable connected to the WAN port. Set up it. Sub node: do not connect any cables. Do not set up. Fresh flashed 3.211 firmware. Press mesh button on the main node until middle LED flashes quickly. Press mesh button on the sub node until middle LED flashes quickly. Wait and it will mesh. ---
**Author:** ![stavol](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/s/ecb155/32.png) [@stavol](https://forum.gl-inet.com/u/stavol)\ **Post date:** [February 7, 2022, 4:54am UTC](https://forum.gl-inet.com/t/lost-mesh-and-luci-after-3-211-firmware-update-gl-b1300/19866/11 "2022-02-07T04:54:22Z")
Thanks, let me try resetting everything again. ---
**Author:** ![bruce](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bruce/32/35649_2.png) [@bruce](https://forum.gl-inet.com/u/bruce)\ **Post date:** [October 29, 2025, 4:16am UTC](https://forum.gl-inet.com/t/lost-mesh-and-luci-after-3-211-firmware-update-gl-b1300/19866/13 "2025-10-29T04:16:19Z")