Mango GL-MT300N-V2: WAN and LAN lights off

idglabs · 2022-07-28T23:17:25.145Z

Firmware openwrt-mt300n-v2-3.212-0407
Mango GL-MT300N-V2

I’m wondering why the lights for WAN and LAN cable are not working in order to indicate the traffic? are there fake lights?

thank you

alzhao · 2022-07-29T10:18:19.365Z

Looking from the edge near the LEDs,

from left to right

Power, WAN or LAN, WiFi

Cannot remember if the middle LED indicate wan or lan, or nothing.

But you can configure the LED function from luci, or modify /etc/config/system

idglabs · 2022-07-29T10:39:06.108Z

Thank you for your reply

But I think I was misunderstood.

All lights WAN, LAN are off in this moment (and I’m talking about lights close to R45 connector, not on the top of the device)

alzhao · 2022-07-29T12:53:32.449Z

There is no light at the Ethernet port.

idglabs · 2022-07-29T13:13:51.839Z

Ok got it… so all hole there ,on WAN and LAN where is RJ45 cable are fake one
fake