Microcuts with Beryl GL-MT1300. Mango works with no problems

mictasal · 2022-03-31T15:58:06.747Z

Hello!
I have internet microcuts with a Beryl (with and without VPN) while a Mango is working totally fine in the same setup.

My connection is RJ45 cable to Beryl and Beryl as Wifi hotspot. Same when I replace Beryl with Mango.

I updated Beryl firmaware to the latest version and it didn’t fix this issue.

What next steps can I take to solve this problem? Thanks!

wcs2228 · 2022-03-31T16:37:40.662Z

Can you post the sections of the System Log (logread) when the problems occur?

You can get it via LuCI → Status → System Log or the SSH logread command.

I do not work for and I do not have formal association with GL.iNet

mictasal · 2022-03-31T22:11:38.268Z

Sure, here is the log:
https://pastebin.com/wpA6fwGN
Thanks for your help.

wcs2228 · 2022-04-01T00:04:14.288Z

The System Log shows Ethernet link down at Tue Mar 29 13:00:50 2022 without any details on the cause.

Can you try a new Ethernet CAT5E (preferably CAT6) cable and plugging into a different port on your Internet modem? The Beryl has 1Gbps Ethernet and the Mango only has 100Mbps Ethernet.

I do not work for and I do not have formal association with GL.iNet