# MT-3000 and AC313U dongle problem

**URL:** <https://forum.gl-inet.com/t/mt-3000-and-ac313u-dongle-problem/36877>\
**Category:** Router\
**Created:** [January 6, 2024, 1:00am UTC](https://forum.gl-inet.com/t/mt-3000-and-ac313u-dongle-problem/36877 "2024-01-06T01:00:15Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![obx\_bum](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/o/5fc32e/32.png) [@obx\_bum](https://forum.gl-inet.com/u/obx_bum)\
**Post date:** [January 6, 2024, 1:00am UTC](https://forum.gl-inet.com/t/mt-3000-and-ac313u-dongle-problem/36877/1 "2024-01-06T01:00:15Z")

</div>

Device Model GL-MT3000 Beryl AX

Firmware version 4.6.0 alpha1

Network topology diagram

 ![obx_bum.drawio](https://forum-static.gl-inet.com/original/2X/1/14b499b65a1201abedfdfc1e3642e4f91c133d21.png)

How is your router connected to the Internet? **This is the problem. I want to use my AC313U (AT&T Momentum rebranded Sierra Wireless now Netgear) as WAN**  
By cell phone? (If yes, which mobile provider?) **AT&T 4G LTE via the USB dongle aka AirCard**  
Which DNS server do you use? (The local one of your ISP? AdGuard Home? Another one?) Usually Quad 9 Primary with CloudFlare as Secondary. Sometimes I use ISP or other.  
Do you use DHCP or static IP addresses? I use DHCP with several reservations.

Problem description  
I use AT&T Momentum (AC313U Sierra Wireless) AirCard for WAN on a Cradlepoint MBR-1200B now but it is long EOL (10 years).  
I have also used this AirCard directly in Laptops running Windows 7 and 10 where it operates as RNDIS or other network adapter. I have also used in Ubuntu where it is detected as a RNDIS or Fast Network adapter.

The MT-3000 partially detects the USB and stays in storage mode or the install CD mode. Not sure which.  
Logs show it is a storage device. It also has storage slot for micro-SD but none is installed. The status light on the dongle flashes slowly as if it is waiting for commands.  
I originally tried flashing OpenWRT 23.05 and loading many modules for USB modem, Serial, QMI and SierraWireless but didn’t even get the AirCard to be detected as any device in UI.  
So I have now flashed the GL 4.6.0 alpha1 firmware and use the GL-inet UI.  
I think this is a modeswitch issue. I found the Vendor and Product IDs to change the json file but I do not know which port or command to set in the file.  
I didn’t see any such reference in dmesg or the logs but it is in the kernel/debug/usb . lsusb doesn’t show anything. No TTYxUSB are created.

I have experience with Linux and Administration but only at basic-intermediate level. I have experience compiling drivers for network and C programs from long ago but no real use in last 20 years.  
I don’t mind editing some config files and similar but if this requires compiling or linking, to resolve my issue I may just return or sell the device.

I saw some posts from other user using a newer version of the AirCard (AC340 AT&T Beam?) in another device and they had to get the usb-mode.json file modified which is now in standard build.

I would liike some sort of step by step to get this AirCard working in Automatic connect fashion to provide more secure / reliable internet.

BTW the kernel/debug/usb entry has this;  
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0  
D: Ver= 2.00 Cls=00(\>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1  
P: Vendor=0f3d ProdID=68aa Rev= 0.06  
S: Manufacturer=Sierra Wireless, Incorporated  
S: Product=AirCard 313U  
S: SerialNumber=012615001832493  
C:\* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA  
I:\* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)  
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms  
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms  
I:\* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)  
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms  
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms  
I:\* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)  
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms  
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms  
I:\* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)  
E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms  
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms  
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms  
I:\* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)  
E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms  
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms  
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms  
I:\* If#= 9 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage  
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms  
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms  
I:\* If#= 7 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)  
E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=2ms  
E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms  
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms

Appreciate any help I can get. 🙏  
EDIT: Forgot to load log Export  
[logread.tar](https://forum.gl-inet.com/uploads/short-url/3SQ9Ovs6AqUkafefBvCZM4c25Ul.tar) (94 KB)  
🤦‍♂️

---

<div class="post-metadata">

**Author:** ![SpitzAX3000](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/spitzax3000/32/11018_2.png) [@SpitzAX3000](https://forum.gl-inet.com/u/SpitzAX3000)\
**Post date:** [January 6, 2024, 3:01pm UTC](https://forum.gl-inet.com/t/mt-3000-and-ac313u-dongle-problem/36877/2 "2024-01-06T15:01:30Z")

</div>

What do you find if you invoke:

> ls -l /dev/\*

Can you also disable all storage services on the modem that could be interfering with usb port? Services like nfsd, gl\_nas\_sys\* and samba\*

---

<div class="post-metadata">

**Author:** ![obx\_bum](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/o/5fc32e/32.png) [@obx\_bum](https://forum.gl-inet.com/u/obx_bum)\
**Post date:** [January 7, 2024, 11:04pm UTC](https://forum.gl-inet.com/t/mt-3000-and-ac313u-dongle-problem/36877/3 "2024-01-07T23:04:49Z")

</div>

Thanks for the assist. Here is the results of what you suggested.  
root@GL-MT3000:~# ls -l /dev/\*  
crw------- 1 root root 5, 1 Dec 23 11:47 /dev/console  
lrwxrwxrwx 1 root root 13 Dec 31 1969 /dev/fd → /proc/self/fd  
crw-rw-rw- 1 root root 1, 7 Dec 31 1969 /dev/full  
crw------- 1 root root 10, 229 Dec 23 11:46 /dev/fuse  
crw------- 1 root root 254, 0 Dec 31 1969 /dev/gpiochip0  
crw------- 1 root root 10, 183 Dec 31 1969 /dev/hwrng  
crw------- 1 root root 1, 11 Dec 31 1969 /dev/kmsg  
srw-rw-rw- 1 root root 0 Dec 23 11:46 /dev/log  
crw------- 1 root root 10, 237 Dec 31 1969 /dev/loop-control  
brw------- 1 root root 7, 0 Dec 31 1969 /dev/loop0  
brw------- 1 root root 7, 1 Dec 31 1969 /dev/loop1  
brw------- 1 root root 7, 2 Dec 31 1969 /dev/loop2  
brw------- 1 root root 7, 3 Dec 31 1969 /dev/loop3  
brw------- 1 root root 7, 4 Dec 31 1969 /dev/loop4  
brw------- 1 root root 7, 5 Dec 31 1969 /dev/loop5  
brw------- 1 root root 7, 6 Dec 31 1969 /dev/loop6  
brw------- 1 root root 7, 7 Dec 31 1969 /dev/loop7  
crw------- 1 root root 90, 0 Dec 31 1969 /dev/mtd0  
crw------- 1 root root 90, 1 Dec 31 1969 /dev/mtd0ro  
crw------- 1 root root 90, 2 Dec 31 1969 /dev/mtd1  
crw------- 1 root root 90, 3 Dec 31 1969 /dev/mtd1ro  
crw------- 1 root root 90, 4 Dec 31 1969 /dev/mtd2  
crw------- 1 root root 90, 5 Dec 31 1969 /dev/mtd2ro  
crw------- 1 root root 90, 6 Dec 31 1969 /dev/mtd3  
crw------- 1 root root 90, 7 Dec 31 1969 /dev/mtd3ro  
crw------- 1 root root 90, 8 Dec 31 1969 /dev/mtd4  
crw------- 1 root root 90, 9 Dec 31 1969 /dev/mtd4ro  
crw------- 1 root root 90, 10 Dec 31 1969 /dev/mtd5  
crw------- 1 root root 90, 11 Dec 31 1969 /dev/mtd5ro  
brw------- 1 root root 31, 0 Dec 31 1969 /dev/mtdblock0  
brw------- 1 root root 31, 1 Dec 31 1969 /dev/mtdblock1  
brw------- 1 root root 31, 2 Dec 31 1969 /dev/mtdblock2  
brw------- 1 root root 31, 3 Dec 31 1969 /dev/mtdblock3  
brw------- 1 root root 31, 4 Dec 31 1969 /dev/mtdblock4  
brw------- 1 root root 31, 5 Dec 31 1969 /dev/mtdblock5  
crw-rw-rw- 1 root root 1, 3 Dec 31 1969 /dev/null  
crw------- 1 root root 1, 4 Dec 31 1969 /dev/port  
crw------- 1 root root 108, 0 Dec 23 11:46 /dev/ppp  
crw-rw-rw- 1 root root 5, 2 Dec 23 11:50 /dev/ptmx  
crw-rw-rw- 1 root root 1, 8 Dec 31 1969 /dev/random  
brw------- 1 root root 8, 0 Dec 23 11:46 /dev/sda  
lrwxrwxrwx 1 root root 8 Dec 31 1969 /dev/shm → /tmp/shm  
lrwxrwxrwx 1 root root 15 Dec 31 1969 /dev/stderr → /proc/self/fd/2  
lrwxrwxrwx 1 root root 15 Dec 31 1969 /dev/stdin → /proc/self/fd/0  
lrwxrwxrwx 1 root root 15 Dec 31 1969 /dev/stdout → /proc/self/fd/1  
crw-rw-rw- 1 root root 5, 0 Dec 31 1969 /dev/tty  
crw-rw---- 1 root dialout 4, 64 Dec 23 11:50 /dev/ttyS0  
crw-rw---- 1 root dialout 4, 65 Dec 31 1969 /dev/ttyS1  
crw-rw---- 1 root dialout 4, 66 Dec 31 1969 /dev/ttyS2  
crw------- 1 root root 250, 0 Dec 31 1969 /dev/ubi0  
crw------- 1 root root 250, 1 Dec 31 1969 /dev/ubi0\_0  
crw------- 1 root root 250, 2 Dec 31 1969 /dev/ubi0\_1  
crw------- 1 root root 250, 3 Dec 31 1969 /dev/ubi0\_2  
crw------- 1 root root 10, 127 Dec 31 1969 /dev/ubi\_ctrl  
brw------- 1 root root 254, 0 Dec 31 1969 /dev/ubiblock0\_1  
crw-rw-rw- 1 root root 1, 9 Dec 31 1969 /dev/urandom  
crw------- 1 root root 10, 130 Dec 31 1969 /dev/watchdog  
crw------- 1 root root 252, 0 Dec 31 1969 /dev/watchdog0  
crw-rw-rw- 1 root root 1, 5 Dec 31 1969 /dev/zero

/dev/bus:  
drwxr-xr-x 4 root root 80 Dec 31 1969 usb

/dev/net:  
crw------- 1 root root 10, 200 Dec 23 11:46 tun

/dev/pts:  
crw–w–w- 1 root root 136, 0 Dec 23 11:50 0  
c--------- 1 root root 5, 2 Dec 31 1969 ptmx

root@GL-MT3000:~# service samba stop  
Usage: service [command]  
Service “samba” not found, the following services are available:  
/etc/init.d/adguardhome enabled stopped  
/etc/init.d/avahi-daemon enabled running  
[clip]  
/etc/init.d/gl\_logread enabled stopped  
/etc/init.d/gl\_nas\_diskmanager enabled stopped  
/etc/init.d/gl\_nas\_sys enabled running  
/etc/init.d/gl\_nas\_sys\_dl enabled running  
/etc/init.d/gl\_nas\_sys\_up enabled running  
/etc/init.d/gl\_s2s enabled stopped  
/etc/init.d/gl\_tethering enabled stopped  
/etc/init.d/gl\_timer enabled running  
/etc/init.d/gpio\_switch enabled stopped  
/etc/rc.common: /etc/init.d/irq-smp-affinity: line 11: syntax error: unexpected “)” (expecting “;;”)  
[clip]  
/etc/init.d/samba4 disabled stopped  
/etc/init.d/sip\_alg enabled stopped  
[clip]  
/etc/init.d/umount enabled stopped  
/etc/init.d/urandom\_seed enabled stopped  
/etc/init.d/urngd enabled running  
/etc/init.d/usbmode enabled stopped  
/etc/init.d/usbmuxd enabled stopped  
/etc/init.d/vpnpolicy enabled stopped  
/etc/init.d/vpnpolicy-apply enabled stopped  
/etc/init.d/vsftpd enabled stopped  
/etc/init.d/webdav\_ser enabled stopped  
/etc/init.d/wpad enabled running  
/etc/init.d/zerotier enabled stopped  
root@GL-MT3000:~#

root@GL-MT3000:~# service gl\_nas\_sys stop  
stop app = /usr/bin/gl\_nas\_sys  
Command failed: Not found  
root@GL-MT3000:~# service gl\_nas\_sys\_dl stop  
stop dl app = /usr/bin/gl\_nas\_sys  
Command failed: Not found  
root@GL-MT3000:~# service gl\_nas\_sys\_up stop  
stop up app = /usr/bin/gl\_nas\_sys  
Command failed: Not found

root@GL-MT3000:~# service nfsd stop  
Usage: service [command]  
Service “nfsd” not found, the following services are available:  
/etc/init.d/adguardhome enabled stopped  
/etc/init.d/avahi-daemon enabled running  
[clip]  
/etc/init.d/gl\_logread enabled stopped  
/etc/init.d/gl\_nas\_diskmanager enabled stopped  
/etc/init.d/gl\_nas\_sys enabled stopped  
/etc/init.d/gl\_nas\_sys\_dl enabled stopped  
/etc/init.d/gl\_nas\_sys\_up enabled stopped  
/etc/init.d/gl\_s2s enabled stopped  
/etc/init.d/gl\_tethering enabled stopped  
/etc/init.d/gl\_timer enabled running  
/etc/init.d/gpio\_switch enabled stopped  
/etc/rc.common: /etc/init.d/irq-smp-affinity: line 11: syntax error: unexpected “)” (expecting “;;”)  
/etc/init.d/irq-smp-affinity disabled stopped  
/etc/init.d/kmwan enabled stopped  
/etc/init.d/led enabled stopped  
/etc/init.d/log enabled running  
/etc/init.d/minidlna enabled stopped  
/etc/init.d/modem enabled stopped  
/etc/init.d/modem-init enabled stopped  
/etc/init.d/modem\_signal enabled stopped  
/etc/init.d/mtk-hwnat-post enabled stopped  
/etc/init.d/network enabled running  
[clip]  
/etc/init.d/samba4 disabled stopped  
[clip]  
/etc/init.d/usbmode enabled stopped  
/etc/init.d/usbmuxd enabled stopped  
/etc/init.d/vpnpolicy enabled stopped  
/etc/init.d/vpnpolicy-apply enabled stopped  
/etc/init.d/vsftpd enabled stopped  
/etc/init.d/webdav\_ser enabled stopped  
/etc/init.d/wpad enabled running  
/etc/init.d/zerotier enabled stopped  
root@GL-MT3000:~#

root@GL-MT3000:~# service gl\_nas\_sys disable  
root@GL-MT3000:~# service gl\_nas\_sys\_dl disable  
root@GL-MT3000:~# service gl\_nas\_sys\_up disable  
root@GL-MT3000:~# service samba4 disable

**Confirmed disabled**  **Even rebooted and this is services after reboot**  
root@GL-MT3000:~# service  
Usage: service [command]  
The following services are available:  
[clip]  
/etc/init.d/gl\_logread enabled stopped  
/etc/init.d/gl\_nas\_diskmanager enabled stopped  
/etc/init.d/gl\_nas\_sys disabled stopped  
/etc/init.d/gl\_nas\_sys\_dl disabled stopped  
/etc/init.d/gl\_nas\_sys\_up disabled stopped  
/etc/init.d/gl\_s2s enabled stopped  
/etc/init.d/gl\_tethering enabled stopped  
/etc/init.d/gl\_timer enabled running  
/etc/init.d/gpio\_switch enabled stopped  
/etc/rc.common: /etc/init.d/irq-smp-affinity: line 11: syntax error: unexpected “)” (expecting “;;”)  
/etc/init.d/irq-smp-affinity disabled stopped  
/etc/init.d/kmwan enabled stopped  
/etc/init.d/led enabled stopped  
/etc/init.d/log enabled running  
/etc/init.d/minidlna enabled stopped  
/etc/init.d/modem enabled stopped  
/etc/init.d/modem-init enabled stopped  
/etc/init.d/modem\_signal enabled stopped  
/etc/init.d/mtk-hwnat-post enabled stopped  
/etc/init.d/network enabled running  
/etc/init.d/nginx enabled running  
/etc/init.d/odhcpd enabled running  
/etc/init.d/openssl enabled stopped  
/etc/init.d/openvpn enabled stopped  
/etc/init.d/packet\_steering enabled stopped  
/etc/init.d/parental\_control enabled stopped  
/etc/init.d/plugins enabled stopped  
/etc/init.d/radius enabled stopped  
/etc/init.d/relayd enabled stopped  
/etc/init.d/repeater enabled running  
/etc/init.d/rpcd enabled running  
/etc/init.d/rtty disabled stopped  
/etc/init.d/samba4 disabled stopped  
[clip]  
root@GL-MT3000:~#  
**removed and reinstalled dongle still not detected.**  
No Joy. Any other things to try?  
logs tar attached  
[logread (1).tar](https://forum.gl-inet.com/uploads/short-url/A261jVJGUyKWOa11iewHe17kqtm.tar) (92 KB)

---

<div class="post-metadata">

**Author:** ![SpitzAX3000](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/spitzax3000/32/11018_2.png) [@SpitzAX3000](https://forum.gl-inet.com/u/SpitzAX3000)\
**Post date:** [January 8, 2024, 3:23am UTC](https://forum.gl-inet.com/t/mt-3000-and-ac313u-dongle-problem/36877/4 "2024-01-08T03:23:11Z")

</div>

Install needed packages like:

> kmod-usb-serial-sierrawireless

search in the forum for related posts. You may also need to Google it to see how other got it to work:

> **[How to Install Sierra firmware within OpenWRT CLI?](https://forum.sierrawireless.com/t/how-to-install-sierra-firmware-within-openwrt-cli/9402/14)**
>
> Hi @wicadmin and all are having troubles while updating. UPDATE: Nevermind, ran the steps a few times and the modem was at the right “window” to accept the update command: There’s an easy way to ready the modem for firmware update which is:...

> **[\[Need Help\] RPI3 + Aircard 320U](https://forum.openwrt.org/t/need-help-rpi3-aircard-320u/98710)**
>
> anyone have success make a connection using this modem?? Bus 001 Device 006: ID 0f3d:68aa Sierra Wireless, Incorporated AirCard 320U root@4G:~# lsusb -t /: Bus 01.Port 1: Dev 1, Class=root\_hub, Driver=dwc\_otg/1p, 480M |\_\_ Port 1: Dev 2, If...

> **[PCIe to USB adapter with Sierra MC7455 install?](https://forum.openwrt.org/t/pcie-to-usb-adapter-with-sierra-mc7455-install/156867/3)**
>
> Thanks for the reply! I made the change to QMI and made some progress. I used ssh to the router with a console window and tried some commands. qmicli --device=/dev/cdc-wdm0 --device-open-proxy --uim-get-card-status \[/dev/cdc-wdm0\] Successfully...

---

<div class="post-metadata">

**Author:** ![obx\_bum](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/o/5fc32e/32.png) [@obx\_bum](https://forum.gl-inet.com/u/obx_bum)\
**Post date:** [January 8, 2024, 10:18pm UTC](https://forum.gl-inet.com/t/mt-3000-and-ac313u-dongle-problem/36877/5 "2024-01-08T22:18:58Z")

</div>

**Thanks, I think I have read most of them before and that is why I think I have modeswitch problem.**  
**I’ll go back and read since you took the time to search.**

**Honestly, I had installed the sierra packages when I tried the OpenWRT 23.05 flash a few weeks ago.**  
**Since I went back to the GL-inet 4.6.0 alpha1 bin I suppose it removed them.**  
**Regardless, When I try to Update available packages I now get these errors.**

**Errors**  
Collected errors:

- opkg\_download: Failed to download [https://downloads.openwrt.org/releases/23.05-SNAPSHOT/packages/aarch64\_cortex-a53/gl\_feed\_common/Packages.gz](https://downloads.openwrt.org/releases/23.05-SNAPSHOT/packages/aarch64_cortex-a53/gl_feed_common/Packages.gz), wget returned 8.
- opkg\_download: Failed to download [https://downloads.openwrt.org/releases/23.05-SNAPSHOT/packages/aarch64\_cortex-a53/glinet/Packages.gz](https://downloads.openwrt.org/releases/23.05-SNAPSHOT/packages/aarch64_cortex-a53/glinet/Packages.gz), wget returned 8.  
The opkg update command failed with code 2

So, I forge ahead and filter for the Sierra packages again and it shows I should load 3.

**Available**  
comgt-directip 0.32-35 2.31 KiB Sierra Wireless Direct-IP support Install…  
kmod-usb-net-sierrawireless 5.15.145-1 5.83 KiB Kernel support for Sierra Wireless devices Install…  
kmod-usb-serial-sierrawireless 5.15.145-1 7.27 KiB Kernel support for Sierra Wireless devices Install…

**This is where it gets interesting.**  
Details for package comgt-directip  
Version: 0.32-35  
Size: ~1.54 KiB installed  
Dependencies:  
comgt INSTALLED  
chat INSTALLED  
kmod-usb-serial INSTALLED  
kernel INSTALLED  
kmod-usb-core INSTALLED  
kmod-nls-base INSTALLED  
kmod-usb-serial-sierrawireless (6.50 KiB) NOT INSTALLED  
kmod-usb-net INSTALLED  
kmod-mii INSTALLED  
kmod-usb-net-sierrawireless (5.12 KiB) NOT INSTALLED  
Description  
Sierra Wireless Direct-IP support

Require approx. 13.15 KiB size for 3 package(s) to install.

Details for package kmod-usb-net-sierrawireless  
Version: 5.15.145-1  
Size: ~5.12 KiB installed  
Dependencies:  
kernel VERSION INCOMPATIBLE  
kmod-usb-net INSTALLED  
kmod-mii INSTALLED  
kmod-usb-core INSTALLED  
kmod-nls-base INSTALLED  
Description  
Kernel support for Sierra Wireless devices

The installed version of package kernel is not compatible, require 5.15.145-1-363d1614… while 5.15.139-1-ff7cf96a… is installed

Details for package kmod-usb-serial-sierrawireless  
Version: 5.15.145-1  
Size: ~6.50 KiB installed  
Dependencies:  
kernel VERSION INCOMPATIBLE  
kmod-usb-serial INSTALLED  
kmod-usb-core INSTALLED  
kmod-nls-base INSTALLED  
Description  
Kernel support for Sierra Wireless devices

The installed version of package kernel is not compatible, require 5.15.145-1-363d1614… while 5.15.139-1-ff7cf96a… is installed.

**So , I filter for “kernel”, “Installed”**  
Package name Version Size (.ipk) Description   
kernel 5.15.139-1-ff7cf96a… - -

\*\*and so many other packages, but I cannot figure out how to upgrade the kernel as dependency. \*\*  
_in opkg configure the sources is set to /etc/opkg/distfeeds.conf_  
src/gz openwrt\_core [Index of /releases/23.05-SNAPSHOT/targets/mediatek/filogic/packages/](https://downloads.openwrt.org/releases/23.05-SNAPSHOT/targets/mediatek/filogic/packages)  
src/gz openwrt\_base [Index of /releases/23.05-SNAPSHOT/packages/aarch64\_cortex-a53/base/](https://downloads.openwrt.org/releases/23.05-SNAPSHOT/packages/aarch64_cortex-a53/base)  
src/gz openwrt\_gl\_feed\_common [https://downloads.openwrt.org/releases/23.05-SNAPSHOT/packages/aarch64\_cortex-a53/gl\_feed\_common](https://downloads.openwrt.org/releases/23.05-SNAPSHOT/packages/aarch64_cortex-a53/gl_feed_common)  
src/gz openwrt\_glinet [https://downloads.openwrt.org/releases/23.05-SNAPSHOT/packages/aarch64\_cortex-a53/glinet](https://downloads.openwrt.org/releases/23.05-SNAPSHOT/packages/aarch64_cortex-a53/glinet)  
src/gz openwrt\_luci [Index of /releases/23.05-SNAPSHOT/packages/aarch64\_cortex-a53/luci/](https://downloads.openwrt.org/releases/23.05-SNAPSHOT/packages/aarch64_cortex-a53/luci)  
src/gz openwrt\_packages [Index of /releases/23.05-SNAPSHOT/packages/aarch64\_cortex-a53/packages/](https://downloads.openwrt.org/releases/23.05-SNAPSHOT/packages/aarch64_cortex-a53/packages)  
src/gz openwrt\_routing [Index of /releases/23.05-SNAPSHOT/packages/aarch64\_cortex-a53/routing/](https://downloads.openwrt.org/releases/23.05-SNAPSHOT/packages/aarch64_cortex-a53/routing)  
src/gz openwrt\_telephony [Index of /releases/23.05-SNAPSHOT/packages/aarch64\_cortex-a53/telephony/](https://downloads.openwrt.org/releases/23.05-SNAPSHOT/packages/aarch64_cortex-a53/telephony)

**At this point I cannot tell if I am getting closer to a fix or just further down the rabbit hole.  
I suppose I could run sysupgrade from CLI via ssh but not sure if that is supported in GL-inet UI or if it would brick.**

---

<div class="post-metadata">

**Author:** ![obx\_bum](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/o/5fc32e/32.png) [@obx\_bum](https://forum.gl-inet.com/u/obx_bum)\
**Post date:** [January 13, 2024, 10:01pm UTC](https://forum.gl-inet.com/t/mt-3000-and-ac313u-dongle-problem/36877/6 "2024-01-13T22:01:46Z")

</div>

@alex_zheng Manage Sources is broken in the [4.6 beta from other post](https://forum.gl-inet.com/t/mt3000-beryl-ax-open-source-wifi-driver-firmware/36607)

In the GL 4.5 .bin file the sources config is pointing to dl.gl-inet but in the 4.6 it is pointing to [openwrt.org](http://openwrt.org).  
Now I get kernel mismatch error when trying to install sierrawireless modules for my 4G LTE dongle.

ERROR  
“The installed version of package kernel is not compatible, require 5.15.145-1-363d1614… while 5.15.139-1-ff7cf96a… is installed.”

Can you help me either configure the sources to point to the GL-inet repo to get updated bin with newer Kernel so I can then install sierrawireless modules or tell me how to change the Manage Sources to fix error?

With the 4.5 beta the Beryl AX freezes UI when dongle is connected.

Thanks!

---

<div class="post-metadata">

**Author:** ![bruce](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bruce/32/35649_2.png) [@bruce](https://forum.gl-inet.com/u/bruce)\
**Post date:** [October 29, 2025, 4:29am UTC](https://forum.gl-inet.com/t/mt-3000-and-ac313u-dongle-problem/36877/7 "2025-10-29T04:29:35Z")

</div>